Is the Compulsory Insurance Sticker Still Required?

1 Answers
EvanLee
07/29/25 9:42am
If the region has implemented electronic insurance policies for vehicles, the compulsory insurance sticker does not need to be displayed; in regions where electronic insurance policies are not yet implemented, vehicles must still display the compulsory insurance sticker. Failure to do so may result in fines and penalty points. To make car usage more convenient, various regions are gradually introducing electronic insurance policies. If electronic policies are implemented locally, there is no need to obtain and display a paper sticker, as the electronic policy can verify whether compulsory insurance has been paid. Compulsory Traffic Insurance (CTI) is a mandatory vehicle insurance policy required by law in China. It is a compulsory liability insurance where the insurer compensates for personal injury, death, or property damage (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. All owners or managers of motor vehicles driven on Chinese roads must purchase CTI. Vehicles without CTI coverage are not permitted on the road. Once a vehicle is registered with the vehicle management office, it must display the annual inspection sticker. Vehicle inspections are conducted to check the vehicle's components, eliminate safety hazards, reduce traffic accidents, and protect the driver's safety. When registering a motor vehicle or applying for an inspection compliance sticker, the traffic management department of the public security authority will check the vehicle's insurance information through an information-sharing platform and no longer require submission of a paper policy. During traffic enforcement, police can verify electronic policy details in real-time via the platform. If the vehicle is confirmed to have valid CTI coverage, it will not be detained or penalized for lacking a displayed insurance sticker.
Was this review help?
9
4
Share
More Forum Discussions

Is the Bora 1.4T transmission dry or wet?

The Bora 1.4T transmission is dry. A wet dual-clutch transmission must have a liquid pump, lubricating fluid, cooling pipes, and an external cooling system. The dry dual-clutch, by saving the related hydraulic systems, has advantages in manufacturing cost, weight reduction, and space structure optimization. Additionally, since the dry dual-clutch lacks hydraulic resistance, it offers higher transmission efficiency and better fuel economy compared to the wet type. Symptoms of clutch damage are as follows: 1. Clutch slipping: When starting the car in a low gear, after releasing the clutch pedal, the car either does not move or has difficulty starting; when accelerating, the speed does not increase with the engine RPM, leading to a feeling of weak driving, and in severe cases, phenomena like a burning smell or smoke may occur. 2. Incomplete clutch disengagement: Even when the clutch pedal is fully depressed, the power between the clutch's driving and driven discs is not completely cut off, resulting in difficulty shifting gears, gear grinding, or inability to stop, along with clutch overheating. 3. Clutch shudder: The entire car shakes when starting, especially at idle speed when gradually releasing the clutch pedal to start in a low gear, causing continuous jerking. 4. Abnormal clutch noise: When the clutch pedal is slightly depressed, as the inner end face of the release bearing just contacts the release lever, the clutch makes a continuous "click, click, click" sound; noise accompanied by shaking occurs when engaging at start-up or disengaging while driving.
11
3
Share

What are the configurations of the Great Wall Pickup Fengjun 7?

The configurations of the Great Wall Pickup Fengjun 7 mainly include exterior, interior, and powertrain aspects. Below is a detailed introduction to the configurations of the Great Wall Pickup Fengjun 7: 1. Exterior Configurations: As a new-generation model of the Great Wall Pickup, Fengjun 7 has undergone a comprehensive upgrade in design. It features integrated crystal diamond LED sensor headlights, a chrome hexagonal grille, a lion-mouth-style bumper, and an aggressive lion front face. The sinking front side windows and integrated wheel arches form the waistline, creating an "Angry Lion" body design. 2. Interior Configurations: Fengjun 7 elevates interior design standards to passenger car levels. It includes the first floating screen, a wrap-around cockpit, automatic climate control, and other comfort features, along with noise control as low as 45 decibels at idle, creating a library-level quiet cabin and a premium SUV-level driving experience. 3. Powertrain Configurations: Equipped with a GW4D20D engine, a "China Core" top-ten award-winning engine, the 2.0T diesel engine delivers a maximum power of 143 PS and a peak torque of 315 Nm at 1400-2800 rpm. Paired with a 6-speed manual transmission, the fuel consumption can be as low as 7.6 liters per 100 km. The golden powertrain combination, along with the all-terrain electronically controlled four-wheel-drive system, ensures off-road capability comparable to professional SUVs.
6
3
Share

What are the steps to reset the maintenance reminder for the BMW 320li?

The steps to reset the maintenance reminder for the BMW 320li are as follows: 1. Turn off the ignition switch and then turn it on again. 2. Press the reset button located at the bottom left of the instrument panel until the words OILSERVICE or INSPECTION and RESET appear, then release. 3. Press and hold the button again until the word RESET appears, then release. 4. Press and hold once more to see the maintenance interval prompt, and continue pressing the button until the word END-SIA appears. The reset is now complete. More details about the BMW 320li are as follows: 1. The BMW 320li has dimensions of 4753*1811*1455mm and a wheelbase of 2920mm. The BMW 320li is a mid-size car launched by BMW. 2. The newly redesigned BMW 320li has increased dimensions, especially the wheelbase. There are some differences in body size between the domestically produced version and the imported version. To meet the needs of Chinese consumers, the domestically produced version has extended the wheelbase and length, resulting in more interior space. 3. In terms of power, this car is equipped with a 2.0T inline four-cylinder turbocharged engine with the model code N20B20D. This engine has a maximum power of 135kW and a maximum torque of 270 Nm. It is paired with an 8-speed automatic transmission. 4. This car competes with the Audi A4L and Mercedes-Benz C-Class. Among its peers, this car does not have a significant advantage in body size, but its 2920mm wheelbase gives it a substantial edge, widening the gap with its competitors.
1
5
Share

What time does the exam at the DMV start?

The exam at the DMV generally starts at 9:00 AM in the morning, and at 1:00 PM or 1:30 PM in the afternoon. Introduction to Subject 1: Subject 1, also known as the theoretical exam or driver's theory test, is part of the motor vehicle driver's license assessment. According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' the exam content includes theoretical driving basics, road safety laws and regulations, local regulations, and related knowledge. The exam format is computer-based, consisting of 100 questions, with a passing score of 90 or above. Subject 1 Exam Process: After registration, wait for notification to sign the agreement. Those who have not had their fingerprints collected must go to the main registration office at the old campus for fingerprint collection. Students who have signed the agreement with the transportation committee must attend theoretical training at the training department; otherwise, their files will not pass the review. Before the official exam, candidates must participate in a mock exam, and rankings are determined based on mock exam scores. Candidates are selected from the highest scores downward. Those who fail the mock exam or are not ranked must wait for the next batch to retake the mock exam. The mock exam schedule will not be notified; students must call to schedule the mock exam. Those who pass the mock exam must attend the official theoretical exam. If a candidate who has received the exam admission ticket does not attend the official exam, it will be counted as one failure, with a suspension of 3-6 months. If a candidate fails the official exam twice, they must pay a 60 yuan retake fee for the third attempt (payment time: exam day; payment location: second floor of the DMV. Payment is organized by the school). One payment allows for two attempts; those who fail on the exam day can retake once more. If a candidate fails the official exam, they must call to schedule a mock exam again.
3
0
Share

What is the startup operation procedure for the Magotan?

The startup operation procedure for the Magotan is as follows: Depress the brake pedal and press the one-touch start button. Below is the correct method for starting the Magotan: 1. Starting/Stopping the Engine: Starting: Depress the brake pedal and press the one-touch start button. Stopping: After the vehicle comes to a complete stop, press the button again. To ensure smooth engine startup, all electrical devices will be temporarily turned off during the starting process. 2. Turning On/Off the Power If you only want to turn on the power, follow these steps: Starting: Without depressing the brake pedal, directly press the one-touch start button. Stopping: Press the start button once more, and all dashboard lights will turn off. The correct gear shifting sequence when turning off the engine: Park the car, depress the brake, shift to N gear, release the brake, engage the handbrake, and turn off the engine.
5
5
Share

Should the Brake and Clutch Be Pressed Together?

Clutch pedal and brake pedal should not be pressed together. Here are the relevant explanations: 1. Functions of components: The function of the brake pedal is very obvious, which is to reduce the speed. When the brake pedal is pressed, the reserved bearing on the car will produce a chain reaction, pushing the brake pads and brake discs to operate, achieving the braking effect. The clutch is equivalent to the neutral gear on the transmission. When the driver presses the clutch, the connection between the transmission and the engine is disconnected. 2. Hazards: If the clutch pedal is frequently pressed, it will not only damage the service life of the clutch but also harm the car's transmission. Unless it is an emergency brake, the clutch and brake can be pressed together to achieve a quick braking effect.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.