Is the Chevrolet Orlando compliant with China 6 emission standards?

Is the photo for driver's license medical examination the same as the one on the driver's license?

Is the photo for driver's license medical examination the same as the one on the driver's license? The answer is yes. Specific requirements are as follows: According to the "Road Traffic Safety Law of the People's Republic of China", the photo standard for applicants of motor vehicle driver's licenses should be: a 1-inch bareheaded photo of the license holder. Requirements for motor vehicle driver photos: The applicant must provide a straight-edged, front-facing, bareheaded color ID photo (half-body portrait) taken within 6 months prior to applying for a motor vehicle driver's license. The background must be white; red clothing is not allowed (as it affects stamping), women cannot wear earrings, photos with shawls are not permitted, men's hair cannot be too long, the facial image must be clear with rich layers and natural expression. The photo size should be 32mm×22mm, with head width between 14mm-16mm and head length between 19mm-22mm.

2

Share

Which button is the window defroster?

Due to different car models, the position of the window defroster button may vary, but it is generally located near the air conditioning controls. Introduction to the window defrosting function: 1. Purpose of window defrosting: To reduce moisture, fog, and frost on the front and rear windshields and exterior rearview mirrors, thereby improving visibility. 2. Necessity of window defrosting: When the dew point temperature is above zero degrees Celsius, fogging occurs; when it is below zero degrees Celsius, frost forms. Defrosting is essential for driving safety. 3. Precautions for window defrosting: Most internal combustion engines use engine coolant heat for heating. In winter, when temperatures are low, start the engine to warm up first. Only after the coolant reaches normal temperature will warm air be available. Before driving, use warm air to dry the windows to prevent fogging. If warm air is used for defrosting but the vehicle is driven before the windows are fully heated, the fogging may worsen.

9

3

Share

What materials are needed for changing the location of a driver's license?

Introduction to the materials required for changing the location of a driver's license: You need to bring your ID card, driver's license, and three one-inch color photos with a white background to the local vehicle management office to complete the transfer procedure for an out-of-town driver's license. For non-local residents, a residence permit is required, provided that the driver's license is in a normal state. The new regulations for license replacement require meeting four conditions: 1. The driver's license has passed the probationary period; 2. All traffic violations and accidents related to the driver's license have been resolved; 3. The driver's license is not expired, revoked, or suspended; 4. The holder of the driver's license is not in the process of additional driving license learning. As long as these four conditions are met, you can apply to transfer your driver's license to the local vehicle management office where you work. The documents required for the application include the original driver's license, the original ID card and its copies, three recent one-inch color photos without hats, and proof of identity conditions, such as a temporary residence certificate or work certificate.

11

2

Share

At what remaining fuel level does the xrv warning light come on?

xrv typically activates the warning light when there's approximately 50 kilometers worth of fuel remaining. This is under conditions of steady driving with lower fuel consumption, which is generally difficult to achieve in reality. In urban areas or poor road conditions, fuel consumption tends to increase. The reasons for increasing fuel consumption in vehicles are as follows: 1. Fuel consumption fluctuations due to temperature effects: In winter, lower temperatures usually lead to increased fuel consumption, almost comparable to summer air conditioning usage. This occurs because cold temperatures cause the engine to dissipate more heat. 2. Prolonged lack of vehicle maintenance: Dirty engine oil and air filters can also increase fuel consumption. Contaminated oil leads to poor lubrication, increasing resistance in the engine's moving parts and requiring more energy to overcome this resistance, thus raising fuel consumption. 3. Spark plug replacement needed: Spark plugs are often overlooked. Even if they continue to function, worn spark plugs can cause delayed ignition due to insufficient energy, missing the optimal ignition timing.

16

1

Share

Why does the engine oil warning light come on after wading through water?

The reasons for the engine oil warning light coming on after wading through water are as follows: 1. Sensor issues: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will then trigger the engine warning light. 2. Oil quality issues: The oil quality referred to here includes both fuel and engine oil. The fuel used in cars generally has a specific octane rating, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend which octane fuel and type of engine oil to use. If the owner does not follow these recommendations, prolonged use can lead to engine wear, causing the warning light to illuminate. 3. Poor combustion of the air-fuel mixture: Faults in the engine's spark plugs, ignition coils, fuel pump, or clogged fuel lines can all lead to poor combustion of the air-fuel mixture. Poor combustion results in engine carbon buildup or knocking issues, which are ultimately detected by the engine's oxygen sensors. After reporting to the ECU, the warning light will naturally illuminate as a warning.

10

3

Share

What should be paid attention to when driving in tunnels?

Attention should be paid to slowing down and not speeding. The following are specific precautions: 1. When approaching the tunnel: carefully observe traffic signs or traffic information boards. Confirm the driving speed through the speedometer, and also pay attention to maintaining a corresponding distance. 2. Two-lane tunnel: drive at a normal speed on the right side of the road, do not change lanes in the tunnel, and do not overtake at will. 3. Turn on the lights in advance: because the visibility in the tunnel is very poor, turn on the headlights and width lights in advance before entering the tunnel to see the road and traffic conditions clearly, and also to facilitate others to identify. 4. Reduce driving speed: due to the difference in brightness inside and outside the tunnel, there is a dark adaptation process for the human eye when the car enters the tunnel, and a light adaptation process when exiting the tunnel. During this process, the driver's vision decreases, so it is necessary to slow down. 5. Control the direction of the car: when driving in the tunnel, the driver should control the direction of the car.

11

4

Share

Is the Chevrolet Orlando compliant with China 6 emission standards?

Is the photo for driver's license medical examination the same as the one on the driver's license?

Which button is the window defroster?

What materials are needed for changing the location of a driver's license?

At what remaining fuel level does the xrv warning light come on?

Why does the engine oil warning light come on after wading through water?

What should be paid attention to when driving in tunnels?

What does a mid-term facelift for a car mean?

Why Are Both the High and Low Pressure Pipes of the Car Air Conditioning Hot?

How to Transfer Insurance When Buying a Used Car?

What is the model number of the Wuling Rongguang alternator belt?