···
Log in / Register

Is the Chery Ant charged with DC or AC?

4 Answers
McCayden
07/29/25 10:56am

Chery Ant takes 30-50 minutes to fully charge the battery from zero using DC fast charging, and 7 hours using AC normal charging mode. Chery Ant is a small pure electric vehicle produced by Chery New Energy. Check before charging: Before charging, check the charging gun, charging socket insulator, pins and sockets for any foreign objects. If there are any, clean them with a high-pressure air gun or brush. Then follow the charging sequence to ensure the charging connection is correct before officially starting the charge. Power requirements for charging: The vehicle's maximum charging power is set at 3.5 kW.

Was this review help?
1
4
Share
Harmony
08/13/25 4:40pm

Hmm, this question reminds me of the days when I used my Chery eQ1. I charged it frequently, mainly using AC (alternating current) because it's more common and better suited for daily home use. I used a standard charger plugged into a 220V socket, and a four to five-hour charge was enough for a day's use. However, for long-distance trips, I would look for public fast-charging stations, where DC (direct current) charging might come into play, allowing the car to charge up to 70-80% in about an hour. Of course, not all Chery eQ1 models support DC fast charging—it depends on the specific version. I should also remind everyone to ensure a dry environment and check the cables during charging to avoid overheating issues, though charging stations have pretty reliable safety protections. Overall, this little car is economical and practical, with flexible charging options—AC is used more often, but occasional DC charging can save a lot of time.

Was this review help?
19
4
Share
Expand All
Miguel
10/07/25 8:01am

Hey, as a car enthusiast, I'm quite familiar with the charging system of the Chery Ant. It supports two charging methods: AC (alternating current) and DC (direct current). AC is the most basic, typically used for charging at home via a wall socket, with gentle and safe current flow, making it suitable for long-term parking. On the other hand, DC is mainly for fast charging stations, offering strong current and quick charging speeds, but it's more suitable for specific locations like parking lots or highway service areas. I'd recommend owners check their vehicle's manual to confirm if it supports DC fast charging, as some lower-spec models might only be compatible with AC. Additionally, during the charging process, AC is more energy-efficient and cost-effective, while DC offers higher efficiency, significantly reducing waiting time. From my experience, regular maintenance of charging equipment is crucial to avoid wire aging affecting its lifespan. Overall, the Chery Ant's design is quite thoughtful—the choice between charging types depends on personal needs: AC for daily use and DC for emergencies.

Was this review help?
17
1
Share
Expand All
StDamian
11/21/25 2:36am

I've helped a friend with this before. The Chery Ant EV usually charges with AC power more often, meaning you can simply plug it into a regular household socket for charging, which is straightforward and convenient. However, at public charging stations, like those fast-charging piles, it's likely to be DC power, which charges much faster. I must say, not all models support DC fast charging, so check the specifications carefully when choosing a car. In terms of charging safety, AC is more stable, but DC is faster and more suitable for long trips. Remember not to charge in the rain to avoid accidents. In summary, AC is the main method, with DC being occasionally useful.

Was this review help?
9
2
Share
Expand All
More Forum Discussions

What is the Difference Between Magnetic Ride Suspension and Air Suspension?

Magnetic ride suspension and air suspension differ in the following aspects: 1. Medium: Air suspension replaces physical springs with airbags, controlling the height and damping of the springs by adjusting the air pressure inside the bags. In contrast, magnetic ride suspension retains traditional springs but replaces conventional hydraulic oil with magnetorheological fluid inside the shock absorbers. 2. Focus: Magnetic ride suspension is designed more for handling and is commonly found in sports models, while air suspension emphasizes comfort and is more prevalent in luxury vehicles. In terms of technological sophistication, magnetic ride suspension is more advanced.
7
2
Share

What is the reason why the car does not move after shifting gears?

When a car does not move after shifting gears, it is a comprehensive functional failure of the vehicle. The issue may involve the clutch, transmission, and drive axle. During inspection, it is necessary to first check whether the car's drive wheels are functioning properly, followed by examining the clutch. Gear shifting refers to the transmission, which is used to change the torque and speed of the engine crankshaft to meet the varying requirements of traction and speed for the drive wheels under different driving conditions, such as starting, accelerating, driving, and overcoming various road obstacles. The car's transmission allows the vehicle to maintain very low engine speeds and relatively low driving speeds, and it also enables the car to reverse, among other functions, making driving more convenient and efficient.
5
3
Share

What is the function of the camera under the rearview mirror?

The functions of the camera under the rearview mirror are as follows: 1. Panoramic imaging: Used to observe blind spots when parking. 2. Monitoring vehicle distance: Used to monitor the distance from vehicles diagonally behind while driving, and it will alert if the distance becomes too close. Below is relevant information about the rearview mirror: 1. Function: The rearview mirror is one of the important safety components of a motor vehicle, used to observe the road conditions behind during reversing and to monitor the surroundings while driving. 2. Adjustment standards: For the left and right rearview mirrors, the distant horizon should be in the middle of the mirror, with the car body occupying 1/4 of the mirror. For the interior rearview mirror, the distant horizon should be in the middle, and you should be able to see your right ear.
18
2
Share

What type of engine oil does Honda Lingpai manufacturer recommend?

Honda Lingpai manufacturer recommends using semi-synthetic engine oil. The oil grade can be SM or SN, and the viscosity can be 0W20, 0W30, or 5W30. For Lingpai, the owner can decide between 0W20 or 5W30 based on the driving environment. If in a colder region, it is recommended to use 0W20 to ensure better cold-start performance. The Lingpai is a strategic mid-size car under GAC Honda, specifically designed to meet the comprehensive needs of post-80s consumers as a mainstream compact sedan. In terms of body dimensions, the Lingpai measures 4664mm in length, 1750mm in width, and 1505mm in height, with a wheelbase of 2650mm.
3
1
Share

How Long Does It Take to Learn Car Wrapping?

For those with a foundation, it takes about 2 weeks to learn, while beginners may require 1 to 2 months. Below are the methods for learning car wrapping: 1. Apprenticeship at a Shop: As an apprentice, you'll handle various tasks, including car washing, detailing, color changes, and wrapping. The learning period is usually longer, typically taking 3 to 4 months or even half a year to become proficient. 2. Training Institution Student: Attending a training institution requires payment, with a teaching cycle of about 1 month. After completing the course, you'll gain theoretical knowledge of the car wrapping process and techniques. Finally, practical experience in real-world settings will enable you to perform hands-on work.
1
4
Share

What are the penalties for driving a scrapped or assembled motor vehicle on the road?

Driving an assembled or scrapped vehicle on the road will result in the immediate revocation of the driver's license. Below are the specific procedures for handling vehicle scrapping: 1. Prepare the required materials for the scrapping procedure: Prepare the "Motor Vehicle Registration Form (Supplementary Table)", "Application Form for Motor Vehicle Suspension, Resumption/De-registration", "Motor Vehicle Registration Certificate" (unless not obtained), and the motor vehicle driving license. 2. Submit an application to the public security authorities: The owner of the scrapped vehicle should promptly submit an application to the public security authorities and complete the motor vehicle scrapping procedures. On the day of acceptance, the public security authorities will issue the "Motor Vehicle Scrapping Certificate" to the owner and instruct them to sell the scrapped vehicle to a scrapped vehicle recycling company.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.