Is the Changan Oshan X7 Plus fuel-consuming?

1 Answers
DamianLee
07/29/25 11:34am
Changan Oshan X7 Plus is not fuel-consuming, with a fuel consumption range between 7.36L/100km and 9.57L/100km. As fuel consumption is influenced by various factors, the above data is for reference only. The fuel consumption calculation formula and considerations are as follows: Fuel consumption calculation formula: Fuel consumed/distance traveled = fuel consumption per kilometer (generally measured per 100 kilometers, then multiplied by 100). Obtaining the data can be cumbersome, so it is common to start with a full tank as the initial data, drive a sufficient distance, and then refill the tank, using the fuel quantity provided by the gas station as the standard. After filling up the tank until the automatic nozzle stops, drive until the low fuel warning light comes on, note the distance traveled, and simply calculate the fuel consumption by subtracting 15 liters from 50 liters. Considerations for calculating fuel consumption: Try to refuel with the minimum amount of fuel to reduce errors. Fill up with the same grade of fuel, keep the receipt, and note the mileage. When the fuel level drops to the position before refueling, note the mileage again. The difference in mileage divided by the amount of fuel added gives the fuel consumption value.
Was this review help?
12
5
Share
More Forum Discussions

What are the symptoms of a damaged steering tie rod ball joint in a car?

Balance rod ball joint damage can cause noise when driving on rough roads, but no abnormal sounds will occur when driving on paved roads. The related introduction of the balance rod is as follows: Balance rod suppresses body roll: When the left and right wheels of a car pass over different road bumps or potholes, anti-roll resistance (Roll-Resistance) is generated, suppressing body roll. Balance rod classification: Front lower control arm balance rod (original equipment required part), toe-in balance rod (original equipment required part), front shock tower top balance rod (commonly known as "top bar" in Hong Kong and Macau, optional part), front crossmember balance rod (commonly known as "front lower bar", optional part), etc.
13
5
Share

What is the difference between dual exhaust pipes and single exhaust pipes?

There is essentially no difference between dual exhaust pipes and single exhaust pipes. The exhaust pipe's sole purpose is to expel combustion waste gases and reduce noise. Installing dual exhaust pipes is primarily for aesthetic appeal and a more imposing appearance. The exhaust pipes of SUVs, coupes, and off-road vehicles are largely similar, differing only in quantity—some have one pipe, while others have two. Additionally, the layout of the exhaust pipes varies; some adopt a single-side dual-exit configuration, while others feature a dual-side dual-exit setup. The function of the exhaust pipe is to discharge the waste gases produced by the engine. Moreover, exhaust pipes are often designed in various shapes mainly to reduce exhaust noise and improve exhaust efficiency. Generally, high-displacement vehicles tend to have more than two exhaust pipes, as this design enhances the engine's exhaust efficiency.
1
0
Share

How Often Should Shock Absorber Top Mounts Be Replaced?

Shock absorber top mounts do not have a fixed replacement interval. Relevant information is as follows: 1. When the vehicle produces particularly loud noises when passing over bumpy roads, along with symptoms such as directional deviation or creaking sounds during stationary steering, the shock absorber top mounts should be replaced. Otherwise, it will affect both the driving experience and safety. 2. If the shock absorber top mounts and buffer rubber lose their elasticity and softness due to aging, or even become damaged, the force from the suspension's up-and-down movement will be directly transmitted to the metal structure of the vehicle body, causing noticeable impact noises. Especially when driving on uneven roads, the suspension components may produce clanking metal impact sounds. Severe damage can also shorten the lifespan of the shock absorbers.
13
4
Share

What is the purpose of a PM2.5 filtration device?

Its function is to filter PM2.5 particulate matter from the air. Here is some information about PM2.5 filtration devices: 1. Some automakers install PM2.5 filtration devices in vehicles, which come in two types: built-in and external. The built-in type is integrated into the car's air conditioning system, while the external type is integrated into the front center armrest. 2. PM2.5 refers to particulate matter in the atmosphere with a diameter of 2.5 micrometers or less (2.5 micrometers is less than 1/20th the thickness of a human hair). These particles can be inhaled into the lungs and pose significant health risks, especially to sensitive individuals. The PM2.5 filtration device serves to filter these particles from the air.
15
0
Share

Does Shifting with Paddle Shifters in D Gear Harm the Car?

Shifting with paddle shifters in D gear does not harm the car. Below are the situations where paddle shifters are useful: 1. When overtaking: The driver can gently pull the paddle shifter with the left hand while accelerating to overtake, then return to automatic mode after completing the maneuver. 2. During acceleration from a standstill: Using paddle shifters helps the car quickly reach the desired speed. 3. Additional tip: When reaching the appropriate RPM, simply press the manual paddle shifter to shift. Paddle shifters are semi-automatic clutch-mounted gear-shifting devices for cars.
13
4
Share

How much engine oil should be added to the 10th-generation Accord?

For the 10th-generation Accord 1.5T model, 3.5 liters of engine oil should be added, while the 2.0L hybrid version requires 4 liters. When adding engine oil, ensure that the oil level is between the min and max marks on the dipstick. The oil level should not be below the min mark or above the max mark. If the oil level is below the min mark, it may lead to insufficient lubrication in the engine, accelerating engine wear. The 10th-generation Accord embodies Honda's innovative spirit and global-leading technology, featuring a high-strength transmission belt for a wide gear ratio range and efficient power delivery. With the "G-Design Shift" control technology, it quickly responds to the driver's demands.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.