Is the Changan Oshan X5 Front-Wheel Drive or Rear-Wheel Drive?

1 Answers
KiraLynn
07/30/25 4:31am
Changan Oshan X5 is front-wheel drive. The differences between front-wheel drive and rear-wheel drive are as follows: 1. Engine: Rear-wheel drive vehicles mostly adopt a longitudinal engine layout, which occupies more space. This significantly reduces rear passenger space, making it less comfortable for rear passengers. However, vehicles with longer wheelbases may have more adequate rear space. Front-wheel drive vehicles use a transverse engine layout, freeing up more space. There is no protruding driveshaft in the cabin, significantly improving rear passenger comfort. 2. Handling: In front-wheel drive vehicles, the front wheels are responsible for both steering and driving, which places a greater burden on them. During sharp turns, understeer (pushing) may occur, or the car might not turn as intended. Rear-wheel drive vehicles, due to the heavier rear axle and greater inertia, are more prone to oversteer (fishtailing). Overall, front-wheel drive vehicles offer higher stability, while rear-wheel drive vehicles provide more driving fun.
Was this review help?
9
2
Share
More Forum Discussions

Can private vehicles postpone their annual inspection?

No, the annual inspection of a vehicle can only be conducted in advance but not postponed. Below are the relevant details regarding the annual inspection: 1. Inspection Period: The annual inspection application should be submitted within 90 days (approximately 3 months) before the due date. Additionally, all traffic violations related to the vehicle must be settled before the inspection. If the inspection is not completed by the due date, it will be considered overdue, resulting in a penalty of 3 demerit points and a fine of 200 yuan. 2. Inspection Results: (1) Vehicles that pass the regular inspection will have their driving license and the 'Motor Vehicle Regular Inspection Form' stamped. (2) Vehicles that fail the regular inspection must be repaired within the specified time frame. If they still fail after the deadline, the vehicle management authority has the right to confiscate the license plate and driving license of the unqualified vehicle, rendering it illegal to drive on the road or transfer ownership.
9
1
Share

What is the fuel consumption of the Mercedes-Benz GLA?

The official fuel consumption of the Mercedes-Benz GLA 1.3T is 6.1 liters per 100 kilometers, and the Mercedes-Benz GLA 1.6T has an official fuel consumption of 6.5 liters per 100 kilometers. Additional related information: 1. Mercedes-Benz: Mercedes-Benz is a world-renowned luxury car brand. In January 1886, Karl Benz invented the world's first three-wheeled car and obtained a patent, earning him the title of 'the inventor of the automobile.' 2. Fuel consumption: Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles.
15
3
Share

What is the function of the clutch in a car?

The function of the clutch in a car is: 1. Facilitate smooth starting: During startup, the clutch separates the engine from the transmission. There is a slipping phenomenon between the driving and driven parts of the clutch, allowing the torque transmitted by the clutch to gradually increase from zero. This results in a gradual increase in the driving force of the car, enabling a smooth start. 2. Convenient gear shifting: During driving, the clutch is used to separate the engine from the transmission when shifting gears. 3. Prevent excessive stress on the transmission system and damage: During emergency braking, the wheels decelerate rapidly, while the transmission system connected to the engine maintains its original rotational speed due to inertia. This creates an inertial torque in the transmission system that is much greater than the engine torque, making the transmission components prone to damage. 4. Reduce torsional vibration impact: The output torque of the engine is usually unstable. The inertia of its own rotating system can reduce torsional vibration, and the damping springs in the clutch can mitigate the torsional vibration impact caused by the engine, thereby extending the lifespan of the transmission gears.
13
1
Share

What are the gear positions of motor vehicles?

Here is an introduction to the gear positions of motor vehicles: 1. All gear positions: Automatic transmissions have P, R, N, D, 2 or S, and L or 1. 2. Parking gear: P stands for Parking gear, also known as the parking position. 3. Other gear positions: R is Reverse, N is Neutral, D is Drive, also known as the driving position. 4. Sport mode: S or 2 represents Sport mode. 5. Low gear: L or 1 is Low gear, also known as first gear. Here is additional information related to gear shifting: 1. Gear shifting: When switching to this gear, the transmission can shift freely, but there will be a delay in shifting, keeping the engine at high RPM for a longer time, allowing the vehicle to move at a low gear with high RPM for an extended period, thereby achieving greater torque output and acceleration. 2. Upshifting technique: The key to smooth upshifting lies in the "throttle blip" magnitude. The "throttle blip" distance should be determined based on the gear being shifted to—the higher the gear, the longer the "throttle blip" distance.
6
5
Share

Can License Plates Be Changed?

Whether license plates can be changed depends on the following situations: 1. After registration: The license plate number cannot be changed because current license plates are for life and cannot be bought or sold. The only solution is to transfer the vehicle ownership. After the transfer, you can reapply for registration, at which time you can choose a new number. 2. Before registration: If you have only selected a number online but have not registered it, you can change the license plate number. After selecting a number, the owner should submit the required documents to the vehicle management office within the specified time to apply for registration. If the procedure is not completed within the designated time, the selected number will automatically become invalid and will be returned to the pool of available numbers. Note that there are only three opportunities to change the number.
2
2
Share

Can the color of position lights be changed?

Currently, there are no explicit legal regulations regarding position lights. However, if the modified position lights differ significantly in color from the original factory-installed ones, it is highly likely to result in a traffic police fine. Generally, position lights are primarily yellow or white. Below is relevant information about position lights: 1. Introduction: When the light switch is turned to the first position, the small lights that illuminate at the front and rear are the position lights (also referred to as evening running lights, which are turned on when it is not completely dark; the next position after position lights is the low beam, while the high beam refers to the main headlights). 2. Purpose: To indicate the width of the vehicle and alert other drivers and vehicles behind. Position lights are used during evening driving to ensure visibility to other vehicles.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.