Is the Car Underbody Guard Useful?

1 Answers
LaAdelyn
07/30/25 9:02am
Car underbody guards are useful. Without a guard, it is not possible to effectively prevent road water, mud, and other debris from entering the engine compartment. Here is some relevant information about engine guards: Engine Guard: Whether it is necessary to install an engine guard depends on the situation: If you frequently drive on low-lying roads or gravel paths, installing an engine guard is necessary; if you mainly use the car for urban commuting, an engine guard is not necessary. Function: The engine guard is designed to protect the engine. It is usually installed under the chassis at the front of the car to prevent the engine from being damaged by impacts. Depending on the vehicle brand and model, whether a new car comes with an engine guard pre-installed varies.
Was this review help?
15
3
Share
More Forum Discussions

Is the Civic Type R rear-wheel drive?

The Civic Type R is not rear-wheel drive; this model adopts a front-engine, front-wheel-drive layout, which means the engine is positioned at the front of the vehicle and the front wheels drive the entire car. The Civic Type R is equipped with a 2.0T turbocharged engine, delivering a maximum power of 320 horsepower and a peak torque of 400 Nm. The transmission system paired with the engine is a 6-speed manual gearbox. As a sports sedan, the exterior design of the Civic Type R does not differ significantly from the standard Civic. The front fascia retains Honda's family-style design, featuring a chrome grille bar and an upper grille with a one-piece design, while the headlights appear more elongated. Unlike the standard models, the Civic Type R sports a red emblem, whereas the regular models come with a silver emblem.
9
0
Share

What is the purpose of cleaning the engine?

The purpose of cleaning the engine is: 1. To prevent oil mixing and remove sludge and oil films formed by engine oil; 2. To reduce corrosion of engine wiring or rubber hoses; 3. To unclog blocked oil passages; 4. To improve engine efficiency, reduce noise and fuel consumption; 5. To clean the engine lubrication system; 6. To prevent the engine from burning oil. The method for cleaning the engine is: 1. Open the fuel tank cap, remove the filter screen, and use a hose to extract the fuel from the tank, then add ethanol gasoline and replace it with a cleaning agent; 2. Disconnect the engine's inlet and return fuel pipes; 3. Add the fuel to the storage tank of the no-disassembly cleaning agent; 4. Adjust the pressure; 5. After cleaning the impurities at the bottom of the fuel tank, drain the gasoline from the tank.
9
0
Share

What is the engine model of the Jianghuai S4?

The engine model of the Jianghuai S4 is hfc4gb2.4e, which functions to provide the necessary power for the vehicle's movement. The Jianghuai S4 is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 6-speed automatic manual transmission. The front suspension of the Jianghuai S4 is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. Its body dimensions are: 4410mm in length, 1800mm in width, and 1660mm in height, with a wheelbase of 2620mm, a fuel tank capacity of 50L, and a body weight of 1365kg.
6
4
Share

What kind of engine oil is used for Changan CS85COUPE?

Changan CS85COUPE uses 5W30 engine oil. This grade is the SAE standard viscosity value of the oil, indicating the viscosity of the oil. W stands for winter, and the number before W represents the minimum temperature at which the oil can be used. Engine oil can lubricate and reduce wear, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine. The dimensions of the Changan CS85COUPE are 4720mm in length, 1845mm in width, and 1665mm in height, with a wheelbase of 2705mm. The driving method of this car is all front-wheel drive. The front suspension of the Changan CS85COUPE is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
7
3
Share

How Many Layers of Polyester in the Tread Are Good?

For small cars, 2 layers of polyester in the tread are quite good. Here is the relevant introduction: 1. Cord material: The cord materials of tires include cotton, rayon, nylon, steel wire, and more. The nominal number of cord layers is based on cotton cord. For example, a 10-ply-rated tire may have either 10 layers of cotton cord, 8 layers of rayon cord, or 6 layers of nylon cord. Since 8 layers of rayon or 6 layers of nylon perform the same as 10 layers of cotton cord, they are all called "10-ply," with the same load-bearing capacity. 2. Tire specifications: Specifications are the marking data for the geometric parameters and physical properties of tires. Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width, and the next number indicates the rim diameter, both in inches.
7
4
Share

What is the method for removing car window tint film?

The method for removing car window tint film is: 1. Use a wallpaper scraper to lift a corner; 2. Peel off the film; 3. Wipe off the adhesive with gasoline. The functions of car window tint film are: 1. Preventing vehicle scratches; 2. Blocking ultraviolet rays; 3. Reducing interior temperature; 4. Maintaining glass clarity. Types of car window tint film: 1. Standard tint film; 2. Anti-shatter film; 3. Sun protection and heat insulation film. The installation method for car window tint film is: 1. Install interior protection for the vehicle; 2. Cut the car window tint film according to the window size; 3. Clean the front and rear windshield glass; 4. Use a heat gun to shape the film; 5. Fine-trim the film after heat shaping is completed.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.