···
Log in / Register

Is the Car Scrapped If the Engine Is Broken?

1 Answers
LaKayden
07/29/25 5:46am
If the engine is broken, the car is not necessarily scrapped. A broken engine can be repaired, and if it cannot be repaired, a new engine can be installed as a replacement. Difference Between Recommended Scrapping and Mandatory Scrapping: Recommended scrapping suggests that the vehicle should be scrapped, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means the vehicle must, without exception, be scrapped. There are four criteria for mandatory scrapping: The vehicle has reached the prescribed service life; After repair and adjustment, it still does not meet the national standards for in-use vehicle safety technical requirements; After repair, adjustment, or the adoption of control technology, the vehicle still fails to meet national standards for in-use vehicle pollutant or noise emissions; The vehicle has not obtained the mandatory inspection compliance mark for three consecutive inspection cycles after the expiration of the inspection validity period.
Was this review help?
11
3
Share
More Forum Discussions

How to reset the tire pressure monitoring system on Honda CR-V?

Honda CR-V tire pressure monitoring system reset method is as follows: 1. Press the arrow button on the lower right of the steering wheel until the central screen displays "Personal Settings." 2. Press the SEL/RESET button, and the central screen will display "Enter/Tire Pressure Monitoring System Calibration." 3. Press the SEL/RESET button again, and the central screen will show "Set/Tire Pressure Monitoring System Calibration." 4. Press the arrow button on the lower right of the steering wheel, and the central screen will display "Calibration 2/2." 5. Press the SEL/RESET button, and the central screen will show "Calibration Started." The tire pressure warning light will disappear after a few seconds. Hazards of excessive tire pressure: • Reduced tire friction and adhesion, affecting braking performance; • Causes steering wheel vibration and deviation, reducing driving comfort; • Accelerates wear on the central tread pattern, shortening tire lifespan; • Increases vehicle vibration, indirectly affecting the lifespan of other components; • Overstretches tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; • Decreases puncture resistance. When encountering sharp objects like nails or glass, the tire is more prone to punctures, leading to internal cracks or blowouts.
18
1
Share

What is the difference between Audi A4L Plus and A4L?

The differences between Audi A4 and Audi A4L: different body dimensions, different cylinder block materials, and different transmission types. Below are the specific details. 1. Different body dimensions: Audi A4: 4763mm, 1826mm, 1426mm. Audi A4L: 4761mm, 1826mm, 1439mm. 2. Different cylinder block materials: Audi A4: iron. Audi A4L: cast iron. 3. Different transmission types: Audi A4: 8-speed CVT automatic manual. Audi A4L: CVT continuously variable transmission. 4. Models: The Audi A4 is the overseas version, while the new Audi A4L is the domestic version with an extended body, reaching a length of 4818mm and a width of 1843mm, providing multi-dimensional comfort for every passenger while also balancing driving pleasure and ride comfort.
10
4
Share

What is the component that moves up and down when a car door is locked?

The component that moves up and down when a car door is locked is the door latch. The car door latch is an important component for maintaining vehicle safety. Here is a detailed introduction about car safety: 1. Overview: Vehicle safety is mainly divided into two major aspects: active safety and passive safety. Active safety refers to the ability to control the car as freely as possible. Whether braking and accelerating in a straight line or steering left and right, the operation should be as smooth as possible, without deviating from the intended path and without affecting the driver's visibility and comfort. 2. Others: The scope of automotive safety technology is becoming broader and more detailed, developing towards integration, intelligence, systematization, and full participation. Strictly controlling speed during night driving is a fundamental measure to ensure safety.
17
1
Share

What does it mean to park in 2nd gear?

When parking on an uphill slope with the front of the car facing upward, it is best to leave the car in 1st or 2nd gear and then engage the handbrake. This provides additional safety to prevent the car from rolling backward in case the handbrake fails. Below is a detailed introduction to car gears: 1. Manual transmission: Generally consists of 5 forward gears + 1 reverse gear. More gears usually allow for more flexible speed control and better utilization of the car's power, which also makes it more fuel-efficient. 2. Automatic transmission: Typically, the gear positions are marked with P, R, N, D, 1, 2, 3, etc. P stands for parking gear, N for neutral, D for the normal forward driving gear, and 1, 2, 3 are also forward gears, but the higher the number, the greater the torque. 3. Continuously Variable Transmission (CVT): Very similar to automatic transmission, but unlike automatic transmission which is electronically controlled, it is actually a mechanical automatic transmission.
5
4
Share

What Are the Reasons Why a Car Door Can Open But the Car Cannot Start?

Car door can open but the car cannot start due to a damaged car anti-theft sensor coil. Here are detailed explanations about car driving: 1. Overview: Car driving is one of the essential skills modern people need to master. To acquire driving-a-motor-vehicle skills, one must meet the required age and physical conditions, and undergo training and examinations on road traffic safety laws and regulations, basic mechanical knowledge of cars, and safe driving practices. 2. Others: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal procedure that must be issued by a specialized authority.
7
0
Share

Where is the Audi VIN located?

Audi's VIN is located at the lower left corner of the front windshield. The VIN, short for Vehicle Identification Number, is a unique 17-character alphanumeric code used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. In the 17-digit VIN, the first 3 characters represent the country of manufacture, the manufacturer, and the vehicle type. Characters 4-8 indicate vehicle features such as model, engine type, and body style. The 9th character is a check digit to verify the VIN's accuracy. The 10th character denotes the production year, the 11th indicates the assembly plant (usually marked as 0), and characters 12-17 represent the production sequence number. Common VIN locations: The VIN is typically found at the lower left corner of the windshield, or on the driver's side door hinge pillar, door lock pillar, or door edge - usually in visible locations. It may also be located in the engine compartment or on the inner door panel near the driver's seat. In most modern Chinese passenger cars, the VIN can usually be found on the left side of the dashboard or below the windshield.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.