Is the car engine under warranty?

Where to Apply for a Mobile Crane Operation Certificate?

Mobile crane operation certificates are uniformly issued by the Quality and Technical Supervision Bureau. The following are precautions for crane operators: 1. Crane Operators: Crane operators must undergo specialized training and pass assessments conducted by relevant authorities to obtain a qualification certificate before being allowed to operate. Unauthorized personnel are strictly prohibited from operating lifting equipment. Before performing lifting operations, crane operators must check whether all devices are functioning normally, whether steel cables meet safety regulations, and whether brakes, hydraulic devices, and safety equipment are complete, reliable, and responsive. Operating any part of the crane with faults is strictly prohibited. Crane operators must work closely with signalers and follow their instructions. A horn must be sounded before operation. If the signal is unclear or incorrect, the operator has the right to refuse execution. During operation, the operator must immediately comply with any emergency stop signal from anyone and can only resume work after eliminating unsafe factors. 2. Signalers: Signalers must clearly communicate instructions to crane operators beforehand. If signals are unclear during operation, an intermediary assistant should be appointed to accurately relay signals. Hand signals should be clear and unambiguous, and signaling with gloves is prohibited. Before lifting an object, check whether the binding is secure. Padding should be placed where ropes pass over edges or sharp corners. The lifting point's center of gravity must be accurate, and the object must not twist, bend, sink, or tilt under force. Before the lifted object is secured in place, the crane operator must not leave the workstation or interrupt work while the sling is under tension or the object is suspended. If the crane operator refuses to lift due to overweight, the signaler should take measures to reduce the overload. Forcing the crane to operate under overload is strictly prohibited.

9

5

Share

How Many Points Can Be Deducted Through Traffic Law Learning?

The maximum points that can be deducted through traffic law learning within one scoring cycle is 6 points. According to Article 5 of the Notice issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14), titled "Work Standards for Reducing Points of Road Traffic Violations Through Accepting Traffic Safety Education (Trial)": Motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations must participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public activities according to their highest permitted driving license type and meet relevant requirements to apply for point reduction. Traffic law learning and point deduction is a measure for drivers holding a driving license who have been penalized with points due to traffic violations. After participating in online traffic safety learning and passing the examination, their points can be reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific precautions are as follows: Applicable Groups: Motor vehicle drivers holding a People's Republic of China motor vehicle driving license, regardless of the driving license type or whether they are commercial vehicle drivers, can participate in traffic law learning and point deduction. They must participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations according to their highest permitted driving license type. Specific Rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must study continuously for 5 minutes each time, accumulating 30 minutes of study time within 3 days. They can then register for an examination within 7 days. Passing the examination can reduce 1 point. Drivers can also attend on-site learning, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for an examination. Passing the examination can reduce 2 points. Drivers can also participate in offline safety public activities, with each hour of participation reducing 1 point. Non-acceptance Situations: The following circumstances will not be accepted: In the previous scoring cycle, the driver had two or more full-point records. Within a 3-point cycle, the driver was involved in hit-and-run accidents, drunk driving, or the manufacture or alteration of documents or license plates. The motor vehicle driving license is in the probation period or has not been reviewed on time. The driver has unprocessed traffic violation records under their name. The driver has a motor vehicle under their name with an expired safety technical inspection or not deregistered as required. The driver has already reduced the maximum 6 points within the cycle.

6

1

Share

How to Open the Trunk of a BMW 5 Series?

The trunk switch of the BMW 5 Series is located at the bottom of the window lift switch on the driver's door. Pulling the button upward for more than 3 seconds will automatically open the trunk. Below is a summary of methods to open the trunk of a BMW 5 Series: 1. Gently pull up the switch button to open the trunk. 2. You can unlock the trunk with the key by pressing the trunk unlock button on the key directly. 3. Using the key's sensing function (within about 1m distance), you can directly pull the trunk switch. 4. Some models have two additional buttons on the trunk, one for closing the trunk and the other for closing the trunk and locking the car.

11

5

Share

Can Waxing Eliminate Paint Color Differences?

Waxing cannot eliminate color differences; it only serves to protect the car paint by creating a layer of wax on the surface, reducing oxidation of the car's paint. Below are the functions of waxing: 1. Filling in minor scratches on the paint surface. 2. Forming a protective layer on the paint surface: protecting the car paint from oxidation and radiation, and enhancing its resistance to dirt. 3. Increasing the gloss and brightness of the car body. 4. Protecting the car paint: forming a dense protective layer to prevent corrosion from acid rain, air conditioning water, and bird droppings. 5. Enhancing the brightness of the car paint: making the paint more glossy and easier to clean from rain and dirty water.

18

0

Share

Is it okay if I haven't received a traffic violation notice in three days?

Not receiving a traffic violation notice within three days does not necessarily mean everything is fine. The review of traffic violations and their update to the database take some time. Below are specific instructions for checking traffic violation information: 1. Traffic violations while driving a motor vehicle: The processing cycle for electronic monitoring by traffic police is approximately 3-5 working days. Whether the motor vehicle is involved in a violation can generally be checked one week later. If no results are found, it can basically be confirmed that there is no violation. 2. Traffic violations across provinces, municipalities, or autonomous regions: The announcement time for such violation information refers to the scope within the province, municipality, or autonomous region. If the violation occurs across provinces, municipalities, or autonomous regions, the query time may be extended to more than 15 working days.

8

1

Share

What Causes High-Speed Brake Vibration?

High-speed brake vibration occurs due to the following reasons: 1. After prolonged driving with multiple braking instances, the brake discs reach high temperatures. When emergency braking triggers the ABS system at this stage. 2. ABS (Anti-lock Braking System) operates as electronically controlled pulse braking, where the brake caliper alternately clamps and releases the brake disc. This intermittent forceful stretching generates heat during deceleration. 3. Excessive heat causes brake rotor deformation. The warped disc then exhibits wave-like distortion. During subsequent high-speed braking, when constrained by calipers, this uneven disc surface vibrates. These vibrations transmit through steering linkages and suspension to the vehicle body and steering wheel, causing body tremors and directional instability.

5

1

Share

Is the car engine under warranty?

Where to Apply for a Mobile Crane Operation Certificate?

How Many Points Can Be Deducted Through Traffic Law Learning?

How to Open the Trunk of a BMW 5 Series?

Can Waxing Eliminate Paint Color Differences?

Is it okay if I haven't received a traffic violation notice in three days?

What Causes High-Speed Brake Vibration?

What are the differences between the Enclave and the Blazer?

Why does the Envision dashboard suddenly go black?

Why is the car making a buzzing sound?

Will Points Be Deducted for Making a U-Turn Over a Crosswalk?