Is the Camry Engine Imported or Domestically Produced?

1 Answers
McClara
07/29/25 11:38am
Camry's engine is not imported; the engine for this model is domestically produced. Below is relevant information about the Camry: Engine Specifications: The Camry is a mid-size car under Toyota, equipped with two types of engines: one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. The Camry's 2.0-liter naturally aspirated engine delivers 178 horsepower and a maximum torque of 210 Nm, with a maximum power output at 6,600 rpm and peak torque between 4,400 to 5,200 rpm. Suspension Usage: The Camry's front suspension uses a MacPherson independent suspension, while the rear suspension employs an E-type multi-link independent suspension. The E-type multi-link independent suspension enhances the wheel's ground contact performance, thereby improving traction.
Was this review help?
4
4
Share
More Forum Discussions

What is the reason for the SVS warning light in JMC Transit?

JMC Transit's SVS warning light is the engine malfunction indicator light. When the SVS light illuminates, it indicates that the engine control unit has detected an erroneous signal from a sensor or that the sensor has exceeded its operational standards. When the driver turns on the ignition, the vehicle's SVS light will illuminate for an automatic check and then turn off after a few seconds. Below is an introduction to the JMC Transit: 1. The dimensions of the JMC Transit are 5696mm in length, 1972mm in width, and 2240mm in height, with a wheelbase of 3570mm. 2. The body type is a 5-door, 9-seat passenger van, equipped with a 5-speed manual transmission. 3. The front suspension type is MacPherson strut independent suspension, and the rear suspension type is leaf spring non-independent suspension.
5
3
Share

What is the relationship between Genesis and Genesis?

Genesis was originally named "Genesis". The following is a related introduction to Genesis: 1. The Genesis GV80 adopts a shield-shaped armor-style front grille and extremely flattened light clusters. Additionally, the wing-spreading logo design "resembles Rolls-Royce, Bentley, and Aston Martin". The overall design language leans towards a youthful aesthetic. 2. The interior design is dignified, grand, and luxurious, with the driver's instrument panel and steering wheel featuring more traditional designs. The 12.3-inch instrument cluster comes with naked-eye 3D functionality, offering excellent display effects and instantly enhancing the sense of technology. 3. Most functions are integrated into the central large screen. To avoid obstructing the driver's view, the central screen is even more flattened than a 16:9 aspect ratio and divides the UI interface into three sections.
9
0
Share

How to fold the mirrors on the Regal 552T?

Steps to fold the mirrors on the Regal 552T: 1. Press the left or right mirror button on the selector switch to choose the driver or passenger side mirror for adjustment; 2. Press the arrows on the control panel to move each mirror to the desired position; 3. Return the selector switch to the center position; then reset the power-folding mirrors. When the vehicle is traveling at normal speed and the mirrors vibrate, it is necessary to reset the power-folding mirrors. Fold and unfold the mirrors once using the mirror control to reset them to the normal position. A popping sound may be heard when resetting the power-folding mirrors. This sound is normal after manual folding operations.
2
3
Share

What is the reason for the simultaneous illumination of the Volkswagen EPC and anti-skid warning lights?

The reason for the simultaneous illumination of the Volkswagen EPC and anti-skid warning lights is a dirty electronic throttle, which should be cleaned. Relevant information about the EPC light is as follows: 1. In vehicle maintenance, EPC light warnings are relatively common. If this light comes on, it means there may be a fault within the electronic throttle system, and the fault could affect the normal use of the vehicle. 2. If the EPC light is on but there are no obvious signs of malfunction, the vehicle can still be driven. The driver can try turning off and restarting the engine to make the EPC light go out. Even if there are no signs of malfunction, the driver should not take it lightly and should promptly have the vehicle inspected and repaired.
11
5
Share

How to Remove the Seats of Volkswagen Lavida?

Volkswagen Lavida's seats are all fixed with screws. To remove them, you need to unscrew the screws: the front seat screws are located at the front of the rails. After removing them, slide the seat out with force. The rear seat screws are located at the calf position. After removing them, lift the seat up with force. Introduction to Volkswagen Lavida is as follows: 1. The body dimensions are 4670*1806*1474mm, with a wheelbase of 2688mm. The overall space performance is quite good, especially the legroom in the second row is relatively spacious. 2. Volkswagen Lavida is built on Volkswagen's latest MQB platform. The center console of Lavida is equipped with a large screen, supporting functions such as car navigation, CarPlay, and CarLife. The interior workmanship and materials are also quite good, using large areas of piano lacquer decorative panels.
16
1
Share

How to Set the Maintenance Mileage for the Great Wall Pao?

Turn off the ignition switch, press and hold the trip meter reset button on the combination meter, then turn on the ignition switch. The odometer display will start counting down. When the display shows 0000.0, release the button. Relevant information about car maintenance is as follows: 1. Car maintenance refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as a preventive measure, also known as car servicing. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 2. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life. 3. Scientifically determining the mileage intervals for various maintenance tasks can not only keep the car in good technical condition but also save on maintenance and repair costs. For new cars in good technical condition and used under favorable conditions, the maintenance cycle can be appropriately extended; for cars in poor technical condition or used under harsh conditions, the maintenance cycle should be appropriately shortened.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.