Is the Cadillac CT4 equipped with an Aisin transmission?

1 Answers
MacBlakely
07/24/25 1:32pm
Aisin is the transmission brand used in the Cadillac CT4. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the highest market share in the global automotive automatic transmission sector. The Cadillac CT4 features an 8-speed automatic manual transmission, also known as an 8AT transmission. The AT transmission is a common type of automatic transmission with a relatively complex structure, containing numerous planetary gears and clutch plates inside. The 8-speed automatic manual transmission is equipped with four gear sets and only five shifting components, with only two components engaged during each shift. Additionally, the newly designed axial parallel sliding vane pump enhances transmission efficiency, minimizing energy loss. When using the Cadillac CT4's transmission in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Although many modern vehicles feature maintenance-free transmission fluid, 'maintenance-free' does not mean 'no replacement.' Prolonged failure to change the transmission fluid can lead to damage to internal bearings, housing, and other components. Avoid coasting in neutral for long durations. While many experienced drivers of manual transmission vehicles may coast in neutral, doing so in an automatic transmission vehicle can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming to demonstrate smooth operation, may shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other malfunctions. Avoid frequently climbing steep slopes in Drive (D). When tackling steep inclines, automatic transmission vehicles may overheat due to high load or may upshift prematurely, resulting in insufficient power. In such cases, using manual mode to lock in a lower gear or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N) and placed onto the tow platform. Towing with a rope or directly dragging the vehicle is not recommended.
Was this review help?
5
3
Share
More Forum Discussions

How to Turn On/Off the Ambient Lighting in the Tiguan L?

The manufacturer of the Tiguan L did not design a switch for the ambient lighting inside the car, so it cannot be manually turned on or off. Generally, when it gets dark, placing the light adjustment knob in the 'auto' position will automatically illuminate the lights. Below are specific details about the ambient lighting in the Tiguan L: 1. Locations: The ambient lighting in the Tiguan L is located at the four-door trim illumination, four-door inner handle illumination, four-door armrest illumination, and footwell lighting (front and rear), totaling 16 locations. 2. Light Source: It uses white LED light sources, and the brightness can be adjusted via the central MIB system (1-100%). This creates a soft effect close to natural light, bringing a warm and comfortable feeling when entering the car at night, enhancing the driving and riding experience.
8
0
Share

BMW X5: Should I Buy the 2.0T or 3.0T?

Here are the differences between the BMW X5 2.0T and 3.0T: 1. Power: The 2.0T model of the BMW X5 is equipped with a turbocharged engine, with a maximum power output of 265 horsepower and a peak torque of 400 Nm. The 3.0T model, on the other hand, features a turbocharged engine with a maximum power output of 340 horsepower and a peak torque of 450 Nm. 2. Configuration: The 2.0T model comes with a cruise control system, while the 3.0T model is equipped with an ACC adaptive cruise control system. 3. Price: The 3.0T model of the BMW X5 has higher configurations compared to the 2.0T model, making it more expensive.
2
1
Share

How to Reset the Driver's Window on a Mazda 6?

To reset the driver's window on a Mazda 6, first turn on the vehicle's ignition switch. Press the driver's window lift switch to lower the window completely, then raise it to the top. Hold the switch for three seconds before releasing it. The reset method for other windows is the same. Below is some relevant information about car windows: 1. Power windows, which use a motor to drive the glass up and down, replace traditional crank-operated windows. Each door is equipped with a button for the window lift switch, making the window operation more convenient and comfortable. 2. Automatic lift function, which is the most basic feature of power windows. Simply press the switch, and the window will continue to rise or fall until it hits the limit switch. 3. External window control function, where inserting and turning the door key from outside the vehicle can lower the window. 4. Lastly, the power reserve function, which is only available on some vehicles, provides about one minute of continued power to the window circuit after the vehicle is turned off.
13
4
Share

What is the most effective way to remove formaldehyde from a new car?

New cars can quickly remove formaldehyde through the following three methods. Here are the methods for removing formaldehyde from a new car: 1. Pay attention to ventilation: The plastic packaging inside the car should be removed as soon as possible so that harmful gases can be released quickly. When driving, open the windows more often to allow air circulation, which will also help remove odors from the car. 2. Adsorption method: Use activated charcoal or Ye Guangni for adsorption. It is important to note that activated charcoal tends to become saturated, so it needs to be replaced after a period of use. Otherwise, the absorbed substances may be released again. In contrast, Ye Guangni not only adsorbs but also decomposes the absorbed harmful substances. It does not require sun exposure and does not become saturated, making it a better choice. 3. Air fresheners: Be careful not to buy only masking sprays. Instead, opt for air purifiers like Guang Lusu, which not only mask odors but also decompose formaldehyde. Only those that can decompose formaldehyde are effective.
10
0
Share

Which car brand is maxus?

maxus refers to SAIC Maxus, a wholly-owned subsidiary of Shanghai Automotive Industry Corporation (SAIC). The brand offers MPV and SUV models, with SUV models including the D60 and D90. Below are relevant details: 1. The D90 is a mid-to-large SUV equipped with a 2.0-liter turbocharged engine. This engine delivers 218 horsepower and a maximum torque of 350 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 6AT transmission. The D90 utilizes a double-wishbone independent front suspension and a five-link solid axle non-independent rear suspension. 2. The D60 is powered by two engine options: a 1.3-liter turbocharged engine and a 1.5-liter turbocharged engine. The 1.3-liter turbocharged engine produces 163 horsepower and a maximum torque of 230 Nm, featuring multi-point fuel injection technology and an aluminum alloy cylinder head and block. The 1.5-liter turbocharged engine generates 169 horsepower and a maximum torque of 250 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
9
4
Share

How to Check the Oil Level Normally on Wuling Rongguang?

Wuling Rongguang's oil dipstick has clear upper and lower limit marks. When adding engine oil, ensure the oil level is between these two marks for normal operation. In automobiles, the dipstick is a commonly used tool to check the remaining quantity of lubricating oil in the oil hole. Due to the curved path of the dipstick insertion hole, the dipstick must be able to deform when inserted and rebound when pulled out. The method for checking the oil level on Wuling Rongguang's dipstick in a stationary state is as follows: 1. After leaving the car overnight or stopping for half an hour, accurately observe the oil level on the dipstick, checking both the front and back sides. 2. Under normal circumstances, check the dipstick once or twice a day. 3. In abnormal situations, such as reduced engine sealing performance, increased oil consumption, or internal/external leaks that have not been addressed. 4. After any malfunction occurs, especially internal damage, promptly check the dipstick. 5. When checking the dipstick, pay attention not only to the quantity but also to any changes in the oil's quality.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.