Is the C2 Driver's License Easy to Obtain?

1 Answers
DiMartin
07/28/25 6:04pm
C2 driver's license is relatively easy to obtain. Operating an automatic transmission vehicle is quite simple, involving only the use of the accelerator and brake pedals, and it's less prone to stalling, making it generally easier to handle. In contrast, manual transmission vehicles are more challenging to operate, requiring not only gear shifting but also careful attention to the timing and speed of gear changes, making the process more complex. Here is some additional information: Switching to C2: Candidates who initially applied for a C1 license can change their application to a C2 license, which is permitted. However, the switch can only be made from C1 to C2; during training, it's not possible to switch directly from C2 to C1. To obtain a C1 license after getting a C2 license, one must first pass the C2 level exam and then apply for an upgrade to C1.
Was this review help?
17
5
Share
More Forum Discussions

What are the differences between domestically produced and imported Outlanders?

There are mainly differences in three aspects: automotive parts, price, and power. 1. Parts 1. Domestically produced Outlander: Mainly uses domestically produced parts. 2. Imported Outlander: Uses original imported parts. 2. Price Taking the 2016 Outlander as an example, the price range for the 2016 imported Outlander was 199,800-284,800 yuan, while the domestically produced Outlander was priced at 159,800-223,800 yuan. 3. Power 1. Domestically produced Outlander: The power is higher than the imported version. 2. Imported Outlander: The power is lower than the domestically produced version.
4
1
Share

Where is the MG HS engine manufactured?

The MG HS engine is produced at SAIC's Lingang Engine Plant, which is a domestically manufactured engine. The 1.5T version of the MG HS engine has the model number 5E4E, with a maximum power output of 127KW, maximum torque of 275Nm, and maximum horsepower of 173. The 2.0T version has the model number 20L4E, with a maximum power output of 170KW, maximum torque of 370Nm, and maximum horsepower of 231. For daily maintenance of the MG HS engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
17
5
Share

Where is the spare tire located on a Polo?

The spare tire of a Polo is placed under the black partition in the trunk. Here is some information about spare tires: 1. Definition: A spare tire refers to an extra tire for a car, with specifications identical to the original car tire. 2. Types of spare tires: They are categorized into full-size spare tires, non-full-size spare tires, and run-flat tires. 3. Purpose: To facilitate tire replacement in case of a flat tire. 4. Precautions: Car owners should regularly inspect the spare tire. Generally, the aging period of a tire is about 4 years, so the spare tire should be replaced after 4 years. After replacing the spare tire, it should not be used for an extended period because the spare tire is slightly smaller in size than the regular tire, and prolonged use may have certain impacts on the vehicle's braking system, steering system, and suspension system.
20
3
Share

How to Install Motorcycle Running Lights?

First, locate a suitable position to fix the running lights. If no suitable spot is available, you will need to drill holes yourself. After drilling and fixing, thread the wires through the drilled holes. Connect yellow to yellow, pink to pink, green to green-white, the red wire to the battery's positive wire, and the black wire is the voltage regulator wire. After connecting, use a multimeter to measure the voltage, checking the battery's positive and negative terminals. Use a 12V 20A0 battery to replace the original vehicle battery. This can extend the battery's working time and prolong the usage of the motorcycle's electrical equipment, lighting, and electric start system.
16
4
Share

How to Install a Sunroof Seal?

Slowly pull out the old sunroof seal along its track and thoroughly clean the gaps inside. Continue along the edge track of the sunroof and firmly press the new seal into place. Carefully inspect the seal for any protruding sections. If found, it indicates incomplete installation, and you will need to apply more force to push the protruding part in. When installing the seal, be sure to leave drainage holes unobstructed. Otherwise, water from the sunroof may not drain properly and could even leak directly into the vehicle.
12
1
Share

What is the engine displacement of the Volkswagen EOSD?

The engine displacement of the Volkswagen EOSD is 2.0 liters. More information about the Volkswagen EOSD is as follows: 1. The Volkswagen EOSD is an imported sports car under the Volkswagen brand, equipped with a 2.0-liter turbocharged engine. 2. The maximum power of the Volkswagen EOSD engine is 155 kW, with a maximum torque of 280 Nm. The engine reaches its maximum power at 5300 to 6200 rpm and its maximum torque at 1700 to 5200 rpm, featuring direct fuel injection technology. 3. The Volkswagen EOSD uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.