Is the BYD Han DM a plug-in hybrid?

1 Answers
ORachel
07/30/25 5:07am
BYD Han DM is a plug-in hybrid. The BYD Han DM is a mid-to-large-sized sedan under the BYD brand, equipped with a 2.0-liter turbocharged four-cylinder engine that delivers a maximum power of 141 kW. The electric motor paired with this engine has a maximum power of 180 kW and a maximum torque of 330 Nm. The BYD Han DM is the flagship new energy model launched by BYD Auto, with a wheelbase of 2,920 mm, and dimensions of 4,960 mm in length, 1,910 mm in width, and 1,495 mm in height. The front suspension of the BYD Han DM uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
12
5
Share
More Forum Discussions

Do Motorcycles Need Rain Covers?

Motorcycles need rain covers. Design of Rain Covers: The outer layer is made of high-reflectivity aluminum-coated film, which reflects sunlight radiation, preventing the vehicle from overheating even after prolonged exposure. The inner layer consists of soft non-woven fabric to protect the vehicle's paint. This composite material is resistant to folding, waterproof, easy to wash, and quick to dry. The design is stylish with smooth lines, featuring specialized hooks that attach to the chassis to withstand wind. The frame uses memory steel wire, allowing for multiple folds. Introduction to Rain Covers: Rain covers help maintain the vehicle's temperature within the most comfortable range for humans while also protecting the interior from UV, infrared, and other harmful light sources. Their functions include being eco-friendly, waterproof, sandproof, dustproof, frostproof, insulating, cooling, providing privacy, resisting UV rays, and reducing the volatilization of harmful substances inside the vehicle.
8
3
Share

How Long is the Break-in Period for a Manual Transmission?

The break-in period for a manual transmission is 1,000 to 1,500 kilometers. Break-in period precautions: Warm up the engine before starting; it's best to wait until the coolant temperature reaches above 40 degrees Celsius before moving off. When starting, gently press and slowly release the clutch and accelerator pedal, and choose smooth road surfaces for driving. During the break-in phase, smooth driving benefits all moving components—avoid sudden acceleration and especially sudden braking, as emergency stops and inappropriate speed increases can damage vehicle components. Post break-in maintenance: Remove the speed limiter to allow the engine to operate without mechanical restrictions; clean the lubrication system of the car's engine, transmission, transfer case, differential, steering knuckle, wheel hubs, and other areas; replace the lubricating oil, using standard new oil to lubricate all lubrication points throughout the vehicle; inspect the electrical system, and clean carbon deposits and oil stains from the ignition components.
13
4
Share

Can a new car with over 1,000 kilometers driven undergo its first maintenance?

New car with over 1,000 kilometers driven can undergo its first maintenance. Maintenance cycle: 4S shops will determine the vehicle maintenance cycle based on the actual local driving conditions, which may differ from the maintenance cycle recommended in the official manual for certain parts. Maintenance precautions: If the local environment is harsh and road conditions are poor, the maintenance cycle should be appropriately shortened, especially for the air filter element and cabin air filter element. Additionally, the quality and specifications of various fluids must not be mistaken; choose fluids with appropriate specifications and better quality. The replacement of brake pads, wiper blades, batteries, tires, etc., depends on wear and tear, so regular inspections are necessary.
5
3
Share

Where is the engine oil drain plug located?

The engine oil drain plug is located on the oil pan. This design facilitates complete oil drainage and cleaning of the oil pan. Composition of engine oil: Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance. Functions of engine oil: The primary functions of engine oil are lubrication, cleaning, and heat dissipation. While oil is used in many parts of a vehicle, the oil that needs to be changed every 5,000 kilometers refers specifically to engine oil. Most people typically use semi-synthetic or fully synthetic oils, with conventional oil being less commonly used. Conventional oil is generally employed in agricultural machinery, three-wheeled vehicles, and motorcycles.
15
4
Share

Is it necessary to replace ATE brake fluid?

It is necessary to replace ATE brake fluid. Advantages of ATE brake fluid: ATE Super Racing brake fluid not only far exceeds other brands in terms of dry and wet boiling points and other indicators, but also has excellent thermal fade control, greatly improving the stability performance for multiple intense braking in racing conditions. Its durability far surpasses the six-month replacement cycle of DOT5 or 5.1 grade fluids, offering a replacement interval of up to three years. Additionally, it has no side effects of corroding plastic brake lines, making it the best match for modified multi-piston brake systems. Performance of ATE brake fluid: Quickly transmits force from the master cylinder to the wheel cylinders. High boiling point (braking generates high temperatures). Stable viscosity, unaffected by temperature. Excellent lubricity, reducing friction between cylinders and seals due to lubrication.
1
3
Share

What is the function of crankshaft bearings?

The function of crankshaft bearings is to support and fix the crankshaft. Crankshaft bearings ensure long-term operation of the crankshaft: Because there is a very small gap between them and the crankshaft, when the engine crankshaft rotates at high speed, a layer of oil film in the gap separates the crankshaft from the bearings, ensuring long-term operation of the crankshaft without damage. Effects of crankshaft bearing wear: Abnormal oil pressure, most components inside the engine use pressure lubrication. In addition to the oil pump delivering oil, many components are designed with oil passages that rely on changes in the relative positions of the components to create a vacuum and guide the flow of oil. For example, the crankshaft and connecting rods are designed with internal oil passages, and these components need to maintain correct clearances to ensure proper lubrication.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.