···
Log in / Register

Is the BYD G3 manual transmission fuel consumption high?

5 Answers
DylanFitz
07/29/2025, 04:07 PM

BYD G3 manual transmission generally has relatively high fuel consumption, with the 1.5L manual version reaching 8.7L/100km. Below is a detailed introduction of this model: 1. Model Overview: The BYD G3 is another high-end model following the F6. It will be available in two displacements, 1.5L and 1.8L, with four variants: the Comfort GL-i, Luxury GLX-i, Premium GS-i, and Flagship GLX-iNAVI. 2. Powertrain: The 1.5L G3 is equipped with either the Mitsubishi 4G15S or the BYD self-developed 473QB engine. The former produces 78kW and 134N·m, while the 473QB engine delivers 79kW and 144N·m. All 1.5L models come with a 5-speed manual transmission. The self-developed 1.8L 483QA engine has a maximum power of 90kW (120 horsepower) and a maximum torque of 160N·m, paired with a CVT transmission.

Was this review help?
11
1
Share
ONorah
08/14/2025, 12:16 PM

I've been driving a BYD G3 manual transmission for three years, and the fuel consumption isn't too high overall, but it depends on how you drive. During rush hour in the city, when stuck in traffic, the fuel consumption can reach around 8L/100km, but if the road conditions are good and you drive at a steady speed, it usually stays around 6.5L. On the highway, it's even more fuel-efficient; on long trips, I've gotten as low as 5.8L. The advantage of a manual transmission is that you can control the shift points yourself, like shifting around 2000 RPM—avoid staying in low gears with high RPMs, as that will increase fuel consumption. Regular maintenance, such as timely oil changes and checking tire pressure, helps keep fuel consumption stable. Compared to some automatic transmission cars, the G3 manual is more fuel-efficient, making it especially suitable for commuters. Over time, you'll realize that fuel consumption depends more on driving habits—rapid acceleration and hard braking are the most fuel-consuming.

Was this review help?
9
5
Share
Expand All
OAlana
10/15/2025, 10:33 PM

From a technical perspective, the fuel consumption design of the BYD G3 manual transmission is quite reasonable. It is equipped with a 1.5L naturally aspirated engine, with an official fuel consumption figure of 6.2L/100km. However, in real-world driving, urban combined conditions may reach around 7L, while highway driving can drop below 6L. Factors affecting fuel consumption include engine efficiency, vehicle weight, and your driving style. The manual transmission allows you to optimize shift timing, maintaining an economical RPM range, such as 1500-2500 RPM, which enhances fuel efficiency. Additionally, regular maintenance is crucial—cleaning the air filter and ensuring the spark plugs are in good condition can help save fuel. The vehicle is not overly heavy, making it agile to drive, and its fuel consumption is lower compared to automatic transmissions in the same class. If you drive smoothly and avoid frequent stops and starts, fuel consumption generally won't be significantly high.

Was this review help?
12
0
Share
Expand All
EleanorDella
11/28/2025, 10:21 PM

I commute daily in a BYD G3 manual transmission, covering 15 kilometers one way with a mix of urban and suburban roads. The average fuel consumption is 7L/100km, slightly rising to 8L during peak traffic jams, but drops to 6L on highway drives during weekends. Not a big issue, as manual transmission can be quite fuel-efficient when handled well. It's recommended to maintain a steady speed, avoid sudden braking, and not overuse the air conditioning. The car is easy to maintain, just change the engine oil regularly.

Was this review help?
15
0
Share
Expand All
Verona
01/18/2026, 11:44 PM

The fuel consumption of the BYD G3 manual transmission is at a medium level among its peers. I've driven other manual transmission cars, such as the Geely Emgrand, which has slightly lower fuel consumption, but the G3 offers more space and practicality. In city driving, the fuel consumption is around 7-8L, and on the highway, it's about 6L, which is significantly more fuel-efficient than automatic transmissions. When driving a manual transmission, pay attention to the shifting timing to avoid lugging or high-gear low-speed driving, which can help maintain reasonable fuel consumption. Regularly check tire pressure and filters to avoid additional fuel consumption. Overall, the fuel consumption is not excessive, making it suitable for budget-conscious families looking for fuel efficiency.

Was this review help?
14
1
Share
Expand All
More Forum Discussions

What does the TC indicator on the dashboard mean?

When the dashboard displays TC, it indicates that the vehicle's Traction Control System is turned off. Here is an introduction to the Traction Control System: 1. The Traction Control System has a dedicated control button, usually located on the car's center console. It is possible that the owner accidentally pressed the button, and pressing it again will restore the system. 2. The function of the Traction Control System is to improve the tire's traction. When the car's tires start to slip, the Traction Control System sends a signal to the vehicle's computer, which then applies braking to the slipping wheel to prevent accidents. The Traction Control System not only enhances the vehicle's stability but also improves its traction. 3. The Traction Control System effectively protects the driver's safety. During driving, especially in rainy or snowy conditions, it can effectively prevent the car from slipping, adding an extra layer of safety. Although the car is equipped with this function, it is still important to drive cautiously and safely.
12
1
Share

What to Do When the Steering Wheel Is Locked and the Key Won't Start the Car?

Simply turn the steering wheel while twisting the key to ignite the engine. The steering wheel lock is a basic anti-theft feature designed for vehicle security. When the car is turned off, if the steering wheel is turned left or right or the wheels are not aligned properly, any applied force can cause the steering wheel to rotate, triggering the self-locking function. This results in the steering lock pin engaging with the steering column. Below are the reasons for the car's automatic lock: 1. Reason for automatic lock: The car's automatic lock is activated when the steering wheel is turned while removing the key after the last engine shutdown. 2. Purpose of the lock: The vehicle's security anti-theft system perceives a theft risk, prompting it to lock the steering system to prevent vehicle theft.
12
2
Share

What is the difference between a 1.2T and a 1.5L car engine?

1.2T refers to a turbocharged engine with a displacement of 1.2 liters, while 1.5L represents a naturally aspirated engine with a displacement of 1.5 liters. Here, T stands for turbocharged engine, and L denotes a naturally aspirated engine. The differences between a 1.2T and a 1.5L car engine are as follows: Different engines: The 1.5L is a naturally aspirated engine. Turbocharging is an advanced technology that makes the engine more fuel-efficient, environmentally friendly, and powerful compared to naturally aspirated engines. The 1.2T is a turbocharged, direct-injection engine. Turbocharging is an advanced technology that provides better fuel efficiency, environmental benefits, and stronger performance than naturally aspirated engines. Different fuel consumption and maintenance costs: Taking A-segment cars as an example, the 1.2T Corolla and the 1.5L Mazda3 both have a fuel consumption of slightly over 7L per 100 km. In terms of maintenance costs, there is not much difference between three-cylinder and standard four-cylinder engines. The main difference lies in the spark plugs—three-cylinder engines have one fewer than four-cylinder engines, making them significantly cheaper. The replacement cycles for other parts are basically the same for both three-cylinder and four-cylinder engines. Different horsepower: The 1.2T engine can provide around 100 horsepower, which is equivalent to the output of a naturally aspirated 1.6-1.8L engine. Additionally, the 1.2T is a turbocharged, direct-injection engine, while the 1.5L is a naturally aspirated engine. Turbocharging is an advanced technology that offers better fuel efficiency, environmental benefits, and stronger performance compared to naturally aspirated engines.
8
1
Share

What Causes the Battery Light to Illuminate?

A yellow light indicates insufficient battery power or complete discharge, while a red light signals a malfunction in the power supply system. Below is a detailed explanation of the reasons for the battery light illumination: 1. If the generator's output voltage is lower than the battery voltage, the generator is not functioning, or there is a fault in the power supply circuit, the car battery light will illuminate. In such cases, it is advisable to visit a repair shop to inspect the generator and charging circuit. 2. The battery light on the dashboard is a warning light indicating that the generator is not producing electricity. Normally, this light turns on when the ignition switch is set to the ON position and turns off after the engine starts. If the light remains on after starting the engine, it may indicate that the generator is not producing electricity or there could be an issue with the wiring, necessitating a visit to a service station for inspection. 3. Insufficient battery power can also cause the battery indicator light to illuminate. In this scenario, the vehicle can still be used because the battery can recharge via the internal generator while the car is in motion.
7
1
Share

What Causes a Heavy Gas Pedal?

Introduction to the causes of a heavy gas pedal: 1. It may be related to fuel quality, with a clogged fuel filter. 2. Check if the spark plugs are faulty. 3. A damaged sensor in the transmission locks the overdrive gear. 4. Issues with the engine's oil circuit, requiring cleaning of the oil circuit. Excessive carbon buildup in the vehicle's engine often manifests as a heavy gas pedal and slow acceleration when overtaking. Common areas prone to carbon buildup include the throttle body, combustion chamber, spark plugs, and fuel lines. Here are methods to address car carbon buildup: 1. Add fuel additives when refueling; 2. Disassemble and clean the engine; 3. Perform a fuel system cleaning with a drip method.
11
5
Share

Will long-term non-use of highways affect ETC functionality?

Long-term non-use of highways has minimal impact on ETC devices. Here are relevant details: 1. ETC Overview: The Chinese term translates to Electronic Toll Collection, which enables automatic tolling on highways or bridges. It utilizes dedicated short-range communication between the onboard unit installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, coupled with computer network technology for backend bank settlement processing. This allows vehicles to pay highway or bridge tolls without stopping. 2. Current ETC Development Status: ETC represents an internationally promoted electronic automatic toll collection system for roads, bridges, and tunnels. Traditional manual toll collection methods using IC cards or magnetic cards as media in highway networks are inevitably influenced by this technological trend.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.