Is the BYD F3 engine a Mitsubishi engine?

1 Answers
KiaraLee
07/29/25 8:44pm
F3 currently uses the Dongan Mitsubishi 4G15S engine. The following is a related introduction about the BYD F3: Exterior: The BYD F3 has a stylish and elegant appearance, with some traces of imitation, but it still attracts the attention of many consumers. Space: The interior space and trunk space are spacious, which is one of its biggest highlights. Interior: The overall interior design is simple and elegant, with a fresh light-colored interior. It is fully equipped with rich configurations and has good air conditioning performance, but the craftsmanship and materials are average, with some noticeable gaps in certain areas. Some 2010 models have been downgraded, and some users have reported issues with dashboard rattling.
Was this review help?
12
2
Share
More Forum Discussions

How to Apply for Temporary License Plates for Vehicles?

To apply for temporary license plates for a vehicle, simply bring the relevant documents to the vehicle management office. Below are the details regarding the application for temporary license plates: 1. Required Materials: Original and photocopy of the vehicle qualification certificate (for imported vehicles, the import certificate); Original and photocopy of the third copy of the compulsory traffic insurance; Original and photocopy of the vehicle owner's identity proof; If applying through a proxy, the original and photocopy of the proxy's ID card are required. 2. Types of Temporary License Plates: Temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for test vehicles, and temporary license plates for special vehicles.
6
2
Share

Can I directly take the B2 driving license test?

You can directly take the B2 driving license test. Here are some relevant introductions about B2: 1. Vehicles allowed: The B2 license permits driving heavy-duty, medium-duty trucks or large, heavy, medium-sized special operation vehicles. Heavy-duty and medium-duty trucks mainly refer to trucks, such as the large dump trucks commonly seen on roads transporting construction waste, which belong to heavy-duty trucks. 2. Difference from A2: The difference between A2 and B2 licenses is that A2 is for tractor-trailers, which consist of a tractor head and a trailer; while B2 is for single-unit cargo trucks.
17
4
Share

What Causes the Anti-Skid Light and Hill Descent Assist Light to Stay On?

Anti-skid light and hill descent assist light staying on may be caused by faults in the safety assistance system module or circuits. Here are relevant introductions about the anti-skid light and hill descent assist light: 1. Anti-skid light: The anti-skid light is a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle reaches its dynamic limits. Electronic stability programs can improve vehicle safety and handling. 2. Hill descent assist light: When the hill descent assist light is on, it indicates that the hill descent control system is activated. This system allows the vehicle to maintain a constant low speed, prevents wheel lock-up, reduces vibrations when descending on uneven roads, ensures driving stability, and improves ride comfort.
15
4
Share

Why Does the Antifreeze in the Car Decrease?

The main reason for the decrease is natural evaporation, with normal consumption being about half a liter per year. Rapid consumption may be caused by leaks or poor circulation, with leaks accounting for about 80% of the cases. Method for Replacing Antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with a focus on the five-way water pipe. The five-way pipe gets its name from having five connecting interfaces for different parts. Antifreeze flows through the five-way pipe and is then distributed to various parts of the car to function. If there are signs of antifreeze leakage in this part, replace the water pipe or re-secure the interface as needed. Drain the old antifreeze and then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir, then continue filling the reservoir with water to allow it to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will be slightly pinkish. Continue adding clean water until the water coming out is clear. Note: Do not forget to remove the heater hose and drain the water from the heater core. About an hour after draining, add the new antifreeze through the radiator hose to allow it to flow quickly into the radiator. Then add another bucket of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is expelled from the cooling system. Top up the antifreeze to the "MAXT" mark on the reservoir.
14
4
Share

How to Step on the Brake Properly?

The correct method to step on the brake is to apply force from the toe to the ball of the foot. Below are relevant introductions about brakes: 1. Principle of Function: The principle of braking is to convert the kinetic energy of the vehicle into heat energy for dissipation. The kinetic energy comes from the power provided by the engine, which requires fuel combustion to perform work. In other words, each time you step on the brake, a bit of gasoline is wasted. 2. Brake Classification: Drum brakes and disc brakes. Disc brakes use stationary brake pads to clamp onto the rotating brake disc attached to the wheel, generating friction to reduce the wheel's rotational speed.
6
0
Share

What is the fuel consumption of the new Cadillac CT6?

The official combined fuel consumption of the new Cadillac CT6 2.0T is 7.1L/100km. A car's fuel consumption is closely related to the driver's habits and road conditions. If driving habits are poor and the car is frequently driven on heavily congested roads, fuel consumption will inevitably be higher. Methods to reduce fuel consumption: 1. Correctly adjust tire inflation pressure: Proper tire pressure can reduce rolling resistance and lower fuel consumption. Additionally, slightly higher tire pressure (about +0.2bar above the recommended value) can also save fuel. 2. Use in-car auxiliary electrical equipment moderately: The use of certain electrical devices can significantly increase fuel consumption, such as the air conditioning system's cooling function. If the heating purpose has been achieved, the seat heater should be turned off promptly. The rear window heater should be turned off when there is no fog or ice on the window.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.