Is the BYD e6 a pure electric vehicle?

2 Answers
IsabelaRose
07/25/25 2:29pm
BYD e6 is a pure electric vehicle. The BYD E6 is a pure electric crossover independently developed by BYD, combining the design concepts of SUVs and MPVs, making it a high-performance crossover. The dimensions of this vehicle are 4560mm in length, 1822mm in width, and 1630mm in height, with a wheelbase of 2830mm. The BYD e6 is a single-motor model, with the motor delivering a maximum power of 120kW and a maximum torque of 450Nm. A major highlight of the BYD e6 is its electric drive system, which uses BYD's self-developed and produced ETPOWER iron batteries for both the power battery and the starting battery. These batteries pose no harm to the environment, as all the chemical substances they contain can be decomposed and absorbed by nature in a harmless manner, effectively addressing environmental issues such as secondary recycling. They are truly green and eco-friendly batteries.
Was this review help?
12
1
Share
LaSimon
08/11/25 9:06pm
I've driven my friend's BYD e6, which is completely pure electric with no gasoline engine at all. It drives exceptionally quiet and smooth, making stop-and-go in the city effortless with quick acceleration that saves time. The range is quite practical, easily covering 300 kilometers on a full charge, though it drains faster on highways with air conditioning on, so it's best to check charging stations in advance. There are many advantages: simple daily maintenance, less wear on the braking system, and significantly cheaper electricity costs compared to refueling, saving a good amount of money each month. Home charging stations are convenient to install, fully charging overnight, and occasionally using public fast chargers can top up half the battery in about half an hour. If considering the second-hand market, pay attention to battery aging; replacing a new battery pack can be somewhat expensive, but overall, it offers high cost performance.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How to Solve the High Water Temperature Issue in Geely King Kong?

Pull over to the side of the road, but do not turn off the engine immediately. Since the cooling capacity has reached its limit, turning off the engine right away would stop the circulation of the boiling coolant. Inspect the engine condenser and radiator. If there are impurities on the surface of the condenser or radiator, or if the heat dissipation is poor, cleaning them should suffice. If the performance of the temperature control switch has degraded or the relay contacts are burnt, this situation is more likely to occur. If the computer detects that the physical water temperature is normal, it indicates that the sensor is faulty, leading to inaccurate readings. If the temperature is high, the issue might be with the water pump, thermostat, or electric fan.
20
1
Share

How to Check Fuel Consumption on the Geely Xingrui Dashboard?

The vehicle dashboard allows you to check the remaining fuel level via the fuel gauge display. The most common indicators are 'F' and 'E', where the closer the needle is to 'E', the more fuel remains. Use the steering wheel's scroll wheel or directional buttons to access the fuel consumption data in the trip computer. Note that the dashboard typically displays two types of fuel consumption. Instantaneous fuel consumption shows the vehicle's fuel usage over a short period. Since driving conditions constantly change, this value fluctuates rather than remaining at a fixed level. The remaining range indicates how many kilometers the vehicle can travel with the current fuel level. This is calculated by the onboard computer using various data points and serves as a reference.
5
4
Share

What to Do When a CNG Vehicle Runs Out of Gas Midway?

Quickly pull over to the right side of the road to prevent safety hazards from stopping in the middle of the road. If the vehicle automatically switches to fuel-driven mode, you can continue driving. For CNG vehicles converted to dual-fuel (gasoline/CNG) systems, you can switch to gasoline mode to start the engine after running out of CNG. The fuel-driven mode can easily take you to the nearest CNG station. Consider finding another vehicle to rent a mini CNG tank from the station. After filling it, bring it back to your vehicle to add natural gas, which should be enough to reach the nearest CNG station. If none of the above methods are feasible, contact a tow truck to bring your vehicle to the nearest CNG station.
17
2
Share

How to Locate Geely Automobile on a Mobile Phone?

Check whether the required positioning terminal accessories and wiring tools are complete. Note: Please ensure that the SIM card is inserted into the GPS positioning terminal when it is not powered on, otherwise the card may be burned. Connect the wires of various colors properly, ensuring that the connectors are not loose or exposed to water. The wiring process should follow standard automotive circuit wiring methods and must not be done carelessly. Common installation locations include behind the dashboard on the driver's or passenger's side, under the seats, and in the trunk, among other places. Report information such as the license plate number, terminal ID, and SIM card number to the company's customer service personnel for activation. Then, you can manage the vehicle's location on your mobile phone.
14
5
Share

Does the Dash Cam Have Surveillance When the Car Is Not Running?

If it is a dash cam with parking surveillance, it can monitor the vehicle when parked. After the vehicle is parked and the engine is turned off, the dash cam will automatically shut down and enter a low-power sleep mode. However, when the vehicle is impacted or detects movement in front, it will immediately activate the parking surveillance function and capture the surrounding footage. This ensures the vehicle's safety monitoring while parked, while also conserving power consumption and preventing the risk of battery drain. More relevant information is as follows: 1. Structural Features: Dash cams with parking surveillance abandon the traditional power supply from cigarette lighters or USB ports, and instead draw power directly from the ACC fuse box via a step-down cable. 2. Usage Recommendation: Since dash cams with parking surveillance draw power directly from the ACC fuse box, the installation process is relatively more complex compared to traditional dash cams. Therefore, it is not recommended for car owners to install dash cams with parking surveillance features on their own.
15
3
Share

Is It Normal to Have Engine Oil in the Exhaust Pipe?

Having engine oil in the exhaust pipe is not normal. The leakage of engine oil from the exhaust pipe is due to high crankshaft pressure. The causes and solutions for engine oil leakage from the exhaust pipe are as follows: 1. Cause: If engine oil drips from the exhaust pipe, it is generally due to cylinder blow-by or a blocked crankcase breather. Solution: Conduct a corresponding inspection and then replace the faulty part. 2. Cause: Check if the PVC one-way valve is blocked. Open the oil filler cap, start the engine, and check if the exhaust gas emitted from the oil filler cap is excessive. If it is, it might be due to piston ring blow-by, causing engine oil to spray from the exhaust pipe. Solution: Replace the piston rings. 3. Choose the right engine oil: Always select high-quality engine oil when maintaining your car. Good engine oil, especially fully synthetic oil, can protect the engine, reduce the frequency of oil changes, and save on fuel expenses.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.