Is the BYD D1 a Premium or Express Service Vehicle?

What is the fuel consumption per 100 kilometers for the Lexus LX570?

Lexus LX570 fuel consumption per 100 kilometers: Average fuel consumption is 12.0L/100km, and the MIIT comprehensive working condition fuel consumption is 14.7L/100km. The following is a related introduction about the LX570: 1. The LX570 is equipped with a 5.7-liter V8 engine, with a maximum power of 280kw, which is 81kw higher than the previous generation's 4.7-liter engine. The maximum torque is 542Nm, and the towing capacity is 3858kg, a significant improvement over the previous generation's 908kg towing capacity. 2. The LX570 is paired with a 6-speed sequential automatic transmission. The new generation LX570 also features a new chassis and suspension. Under the mature electronic control system, the LX570 delivers a unique performance experience with economical fuel consumption. Average fuel consumption/MIIT comprehensive working condition fuel consumption: 12.0L/100km/14.7L/100km.

15

3

Share

Will the insurance company compensate if the car is flooded in an underground garage?

After purchasing vehicle damage insurance, the insurance company can compensate for a car flooded in an underground garage. Here are the details: Prerequisite: The owner of the damaged vehicle must have a prerequisite when claiming compensation from the insurance company: they must have signed an "Automobile Insurance Contract" with the insurance company and have purchased vehicle damage insurance. This establishes a legal contractual relationship between the owner and the insurance company, allowing the owner to claim compensation. Important Notes: If the car is flooded in the garage, immediately report it to the insurance company and seek their assistance. Do not attempt to start the engine, as this can easily damage it. If the engine is damaged under such circumstances, the insurance company has the right to refuse compensation for the engine's damage if the owner has not purchased additional water-related damage insurance, only covering the body damage. However, if the owner has purchased vehicle damage insurance along with water-related damage insurance, full compensation will be provided.

2

1

Share

What does the crank connecting rod mechanism mainly include?

The crank connecting rod mechanism mainly includes the cylinder block, cylinder gasket, cylinder head, crankcase, cylinder liner, and oil pan of the engine block group; the piston, piston rings, piston pin, and connecting rod of the piston connecting rod group; and the crankshaft, flywheel, torsional vibration damper, and balance shaft of the crankshaft flywheel group. The engine block serves as the installation foundation for all mechanisms and systems of the engine, accommodating all major components and accessories inside and outside, and bearing various loads. Therefore, the engine block must have sufficient strength and rigidity. Working principle of the crank connecting rod mechanism: During the power stroke, the piston is subjected to the expansion pressure generated by combustion gases, converting the linear motion of the piston into the rotational motion of the crankshaft through the connecting rod, thereby outputting power. Relying on the rotational inertia of the crankshaft and flywheel, the connecting rod drives the piston up and down to complete auxiliary strokes such as exhaust, intake, and compression, preparing for the next power stroke.

14

3

Share

Where does the 90-second parallel parking start and end?

Parallel parking for 90 seconds starts timing when entering the parallel parking area and ends when the vehicle exits the parallel parking area. The parallel parking area begins 4 meters in front of the parking space, with a total length of 17.7 meters. The parking space itself is 7 meters long and 2.5 meters wide. The test is considered complete when the vehicle finishes parallel parking and crosses the stop line. Below is additional information for Subject 2: Number of attempts for Subject 2: You can retake Subject 2 up to five times. If you fail the fifth attempt, all previously passed subjects will be invalidated, and you will need to restart from Subject 1. Each Subject 2 test appointment includes two attempts. If you fail the first attempt, you can retake it once for free. If you do not take the retest or fail the retest, the test session ends, and you can reschedule the Subject 2 test after 10 days. Test content: Parallel parking, stopping and starting on a slope, reversing into a garage, curve driving, and turning at a right angle.

17

3

Share

Is there a significant difference in usage between 95h and 95v?

There is not much difference in usage between 95h and 95v, as the maximum speeds corresponding to these two types of tires are 210km/h and 240km/h respectively, which are speeds that are rarely reached in daily driving. The letters h and v are tire speed rating codes: The speed rating indicates the maximum speed at which a tire can carry a specified load under specified conditions. Different tires will have English letters on their sidewalls indicating their speed ratings. These represent the certified speed ratings of tires ranging from 4.8 km/h to 300 km/h. The letter codes range from A1 to ZR. The meaning of tire specifications: Taking a tire with the specification 235/45/R18/98W as an example, it indicates a tread width of 235mm, an aspect ratio of 45%, R for radial tire, a suitable rim diameter of 18 inches, a maximum load index of 750kg, and a maximum speed capability of 270km/h.

9

5

Share

Is It Necessary to Clean the Intake System?

It is necessary to clean the car's intake system. The specific reasons are as follows: 1. Cleaning the intake system is essential. If left untreated for a long time, you may notice increased fuel consumption, unstable idling, and significantly reduced performance during rapid acceleration. It is recommended to inspect the throttle every two maintenance cycles and clean it promptly if needed. 2. To improve efficiency, non-disassembly cleaning methods are now commonly used. While the engine is running, a combustible cleaning agent is injected into the intake pipes, which can remove carbon deposits to some extent. However, due to the length of the intake pipes and varying temperatures in different sections, the form and nature of carbon deposits differ, making it difficult to thoroughly clean with a single cleaning agent. 3. Note that since these non-disassembly cleaning agents are highly flammable and hazardous, and there are many precautions to consider during operation, using incorrect or counterfeit products, or improper handling, can easily lead to accidents. Severe cases may result in engine damage or even fires. Therefore, it is crucial to use products from reputable suppliers through official channels to ensure engine safety and protect your rights.

18

3

Share

Is the BYD D1 a Premium or Express Service Vehicle?

What is the fuel consumption per 100 kilometers for the Lexus LX570?

Will the insurance company compensate if the car is flooded in an underground garage?

What does the crank connecting rod mechanism mainly include?

Where does the 90-second parallel parking start and end?

Is there a significant difference in usage between 95h and 95v?

Is It Necessary to Clean the Intake System?

Are Green License Plate Vehicles Subject to Traffic Restrictions?

What is the oil filter model for the Baojun 310?

What are the symptoms of a faulty dual-clutch transmission valve body?

Does Frequent Vehicle Title Transfer Have Any Impact?