Is the Buick Excelle fuel consumption high?

2 Answers
OIris
07/23/25 8:59pm
The average fuel consumption of the Buick Excelle is 8.4 liters per 100 kilometers, which is not considered high and falls into the medium range. Factors affecting fuel consumption: 1. Weight: The relationship between vehicle weight and fuel consumption is directly proportional. A 10% reduction in vehicle weight will correspondingly reduce fuel consumption by several percentage points. 2. Design: A smaller aerodynamic drag on the vehicle body will significantly reduce fuel consumption, and these two factors are also directly proportional. 3. Thermal efficiency: Strive to improve the engine's thermal efficiency. Generally, the thermal efficiency of gasoline engines (the proportion of fuel converted into useful work) reaches over 30%, while diesel engines exceed 40%. This is the main reason why diesel engines have lower fuel consumption than gasoline engines. The ratio of engine power to displacement is called the power per liter, indicating how much power the engine can generate per liter of displacement. The higher this ratio, the more advanced the engine technology. 4. Vehicle condition: Good vehicle condition is fundamental to fuel efficiency. Many drivers take great care of their vehicles, but due to a lack of automotive knowledge, their care is often limited to keeping the car clean, while other aspects are frequently neglected. In fact, scientific maintenance can help achieve fuel-saving goals. For example, wheel bearings should be lubricated regularly, but some owners are unaware of this until the bearings wear out. 5. Road conditions: Driving conditions are an important factor affecting fuel consumption. Every car has its own "economical speed," generally designed within the range of 70 to 90 kilometers per hour. If the car can move smoothly within this speed range in urban areas, the fuel consumption should be close to the test values obtained in standard test environments. When the car moves slower than a bicycle, fuel consumption increases significantly. 6. Driving habits: Incorrect driving habits can lead to a significant increase in fuel consumption. With the advent of the automobile era, there are more and more non-professional drivers, which inevitably leads to a major problem: incorrect driving habits result in higher vehicle fuel consumption. This impact is even greater on large-displacement vehicles.
Was this review help?
17
1
Share
MatteoMarie
08/10/25 6:51pm
The fuel consumption of the Excelle is generally not high. Official data shows about 6-7L/100km in city driving and around 5L on highways, which is quite fuel-efficient. However, actual consumption may vary depending on the driver. For example, when I drive the Excelle, I notice that aggressive driving or heavy traffic can increase fuel consumption to 8-9L. Factors affecting this include your driving habits: rapid acceleration and hard braking consume more fuel; and the condition of the car, such as underinflated tires or uncleaned engine carbon deposits, can also increase fuel consumption. It's recommended to check your tires weekly and maintain smooth driving to keep it mostly under 7L. On highways, the Excelle performs excellently, maintaining stable low consumption, making it a great choice for daily commuting.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What is the maximum torque of an engine?

Engine maximum torque refers to the average moment force output from the crankshaft during engine operation. Torque is a crucial parameter of engine performance - the greater the torque, the more powerful the engine output, the faster the crankshaft speed changes, and the better the vehicle's climbing ability, starting speed, and acceleration performance. Engine output is directly related to rotational speed. Initially, the engine's output power increases as the speed rises. However, when the output reaches a certain peak value, the power will decrease with further increases in engine speed. Different engines also have varying rotational speeds at which they achieve maximum power.
9
3
Share

What does 96w on a tire mean?

Tire marking 96w indicates the maximum limits that each tire can withstand. The number 96 represents the load index, with a maximum load capacity of 710 kilograms - the higher the number, the greater the load capacity. The letter w denotes the speed rating, indicating a maximum speed of 270 km/h. Speed ratings use later letters in the alphabet to represent higher speed capabilities. A tire's speed rating shows the maximum permitted driving speed, typically marked on the tire sidewall using uppercase letters. Different letters correspond to different speed ratings, for example: L indicates a maximum speed of 120 km/h; T represents 190 km/h; and V signifies 240 km/h.
9
4
Share

What is the working principle of a starter?

The working principle of a starter is that when the ignition switch is closed, it energizes two coil windings. Due to the smaller resistance of the pull-in coil, a larger current passes through it. This coil is connected in series with the motor circuit. Under the effect of the current, the motor rotates slowly to facilitate the engagement of the pinion gear with the flywheel. The starter converts the electrical energy from the battery into mechanical energy, driving the engine flywheel to rotate and enabling the engine to start. Before the engine can operate under its own power, it must rely on external force to rotate. The process by which the engine transitions from a stationary state to self-sustained operation with the help of external force is called engine starting.
5
4
Share

How many liters of engine oil does the Corolla Hybrid require?

The Corolla Hybrid requires 4L of engine oil, with a displacement of 4.5L. Below is relevant information about the Corolla: 1. Key advantages: Low fuel consumption; comfortable ride with smooth driving; rich humanized interior configurations. 2. Performance: Overall strong power output with quick acceleration, though initial acceleration is somewhat slow. Engine noise is minimal, described by users as "very quiet with minimal cabin noise." However, tire noise becomes noticeable when driving above 80 km/h, leading some owners to perform sound insulation modifications. The new dual VVT-i engine pairs perfectly with the CVT transmission, delivering robust 2.0L power. The six-speed manual transmission boasts high precision with clear gear engagement, though the 4-speed transmission is relatively outdated.
18
2
Share

How to Solve Air Leakage in the Automotive Brake Master Cylinder?

Automotive brake master cylinder air leakage can be resolved by: disassembling the brake master cylinder for cleaning, inspecting the air shut-off valve for any damage, and then applying some grease before reassembling. The brake master cylinder, also known as the brake main cylinder, is a key component of the vehicle's braking system. Depending on the vehicle type, it is categorized into two types: air brake master cylinder and hydraulic brake master cylinder. The primary function of the brake master cylinder is to push brake fluid to various brake wheel cylinders to actuate the pistons. To enhance driving safety and comply with traffic regulations, modern vehicles are equipped with a dual-circuit braking system, which utilizes a tandem dual-chamber master cylinder to form a dual-circuit hydraulic braking system.
11
2
Share

Where is the car gateway located?

The car gateway is generally located behind the dashboard. The gateway refers to the use of a gateway computer in the vehicle, which is part of the bus technology. The car gateway computer is responsible for receiving various signals from the vehicle, including those that the main vehicle computer cannot receive. The primary function of the gateway is to coordinate information transmission between different modules, prioritizing data sent by various computer modules. Since the transmission speeds of the buses to which different modules belong vary, the gateway accelerates the data being sent during information exchange, reducing the transmission speed between different pieces of information and thereby improving the efficiency of data transfer. The use of a gateway enhances the connection between wiring harnesses and improves the efficiency of the electrical system.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.