Is the Buick Excelle a Joint Venture or Domestic Car?

1 Answers
McBella
07/30/25 3:59am
The Buick Excelle is a joint venture car, a compact sedan under the Buick brand, with body dimensions of 4609mm in length, 1798mm in width, and 1464mm in height, and a wheelbase of 2640mm. The Buick Excelle is equipped with two engines: a 1.3-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine delivers a maximum horsepower of 113 hp and a peak torque of 141 Nm, featuring DVVT technology and multi-point fuel injection, with an aluminum cylinder head and cast iron cylinder block. The 1.3-liter turbocharged engine produces a maximum horsepower of 163 hp and a peak torque of 230 Nm, incorporating a 48V mild hybrid system and multi-point fuel injection, with an aluminum cylinder head and block.
Was this review help?
12
3
Share
More Forum Discussions

What is the metal piece inside the wheel hub?

The metal piece inside the wheel hub is a tire balancing weight. Here is the relevant introduction about tire balancing weights: 1. Tire unevenness: The car's wheel is a whole composed of the tire and the wheel hub. However, due to manufacturing reasons, the mass distribution of each part of this whole cannot be very uniform. 2. Rotational imbalance: When the car wheel rotates at high speed, it will form a dynamic imbalance state, causing the wheel to shake and the steering wheel to vibrate while driving. To avoid this phenomenon or eliminate an already occurring phenomenon, it is necessary to correct the balance of each edge part of the wheel by adding counterweights under dynamic conditions.
13
5
Share

Is It Normal for a Motorcycle Engine to Be Hot to the Touch?

It is normal for a motorcycle engine to be hot to the touch. Lifespan of a Motorcycle: The lifespan and continuous mileage of a motorcycle are largely determined by its design. Relevant data shows that the lifespan of a brand-new motorcycle tire is approximately 50,000 kilometers, while the engine's lifespan is around 100,000 kilometers. Safety Precautions: During the use of a motorcycle, proper vehicle maintenance should be carried out to minimize high-intensity continuous operation and avoid excessive wear and tear. Additionally, the rider's physical endurance should be considered during prolonged continuous riding.
11
4
Share

Which sections of the highway allow parking?

On highways, parking is only permitted in service areas and emergency lanes. Choose service areas for normal parking and emergency lanes for urgent stops. Here are the details: 1. Do not park on highway ramps, acceleration lanes, or deceleration lanes: Not only does this disrupt normal traffic flow, but it also increases the risk of accidents. 2. Many drivers mistakenly believe that V-shaped white solid line areas are temporary parking zones: These V-shaped white solid line areas at ramp entrances are technically called 'channelizing lines.' Their purpose is to ensure that every vehicle stays in its designated lane, serving to regulate, guide, and warn traffic, thereby reducing the likelihood of accidents.
2
0
Share

What are the issues when the EPC light is on in a truck?

Truck EPC indicator light staying on indicates a fault in the engine or electronic systems. Here are the detailed explanations: 1. Intake system failure: There may be leaks or blockages in the intake system. 2. Dirty throttle body: The throttle body is dirty or has excessive carbon buildup, requiring cleaning of the relevant parts. 3. ECU malfunction: Reprogramming the ECU data, this method is used when other faults have been resolved but the issue persists. 4. Engine management system failure: This condition is often accompanied by unstable idling and engine shaking during cold starts. It is mostly caused by poor fuel quality and dirty driving environments in the country. In such cases, the vehicle should be immediately taken to a repair shop for inspection and servicing.
14
2
Share

Does a small scratch on the wheel hub have any impact?

Wheel hub scratched a small piece does not affect. The following is a specific introduction to automobile wheel hubs: 1. Working method: The wheel hub bearing unit adopts a bearing unit and an anti-lock braking system. The wheel hub unit is designed with inner and outer flanges, the inner flange is fixed to the drive shaft with bolts, and the outer flange installs the entire bearing together. 2. Wear impact: Worn or damaged wheel hub bearings or wheel hub units can cause high-cost failures during vehicle operation, and even pose safety hazards. 3. Upgrade method: The most common method for upgrading automobile wheel hubs is to replace them with aluminum alloy rims, or to use larger wheel hubs to improve vehicle performance and appearance.
12
2
Share

What is the reason for the unactivated bidding document?

The reason for the unactivated bidding document is that the review was not passed. Introduction: License plate is the common name for vehicle plates, which are plates hung separately at the front and rear of the vehicle. Material: The commonly used materials are aluminum, iron, plastic, or paper, with the vehicle's registration number, registration region, or other relevant information engraved on them. Function: The license plate serves as a numbering and information registration for each vehicle. Its main function is to identify the region to which the vehicle belongs through the license plate, and the owner of the vehicle and its registration information can also be traced based on the license plate.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.