Is the Buick Envision fuel-efficient?

2 Answers
VonEmmett
07/29/25 1:45am
Buick Envision consumes fuel, with an actual fuel consumption of 6.6 to 8.8 liters per 100 kilometers. Taking the 2021 Envision as an example, it is a mid-size SUV with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase of 2750mm, and a curb weight of 1610kg. The 2021 Envision features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum torque of 250Nm, and a maximum power of 124kW, paired with a 7-speed dual-clutch transmission.
Was this review help?
5
4
Share
OCharlie
08/12/25 5:49am
I've been using the Buick Envision for almost two years now, and the fuel consumption isn't too bad at all. For daily city driving, it generally stays between 10 to 11 liters per 100 kilometers, and on the highway during cruising, it can drop to around 7 or 8 liters, which is quite reassuring. Being an SUV, it's normal for it to be heavier and have higher wind resistance, but the Envision's power delivery is smooth and not too fuel-hungry. The key lies in driving habits—I prefer gradual acceleration, anticipating stops, and minimizing sudden braking to keep fuel consumption stable. Regular maintenance is also crucial, like changing the oil and cleaning carbon deposits periodically to ensure the engine doesn't lag. Using air conditioning in summer does increase fuel consumption a bit, but there's no need to worry too much—the overall cost of ownership is reasonable. If you frequently take long trips, this car's fuel consumption is entirely acceptable.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What causes the EPC light to come on in a car?

Car EPC light comes on due to fuel quality issues or electronic control system failure. The following are detailed explanations of the above reasons: Fuel quality issues: A constantly illuminated EPC warning light indicates a fault in the engine management system or electronic control, often accompanied by unstable idle speed or engine cold start vibration. However, for domestic drivers in China, this is usually caused by poor fuel quality and dirty driving environments. It is recommended to drive to a maintenance service station as soon as possible for inspection. In most cases, cleaning the throttle body can resolve the issue. Electronic control system failure: The EPC indicator light will illuminate when the ignition is turned on for functional check. If this light comes on while driving, it indicates a fault in the engine power electronic control system. The engine must be checked immediately. Generally, a dirty throttle body, vacuum leaks in the intake system, damaged brake switches, or untimely engine upgrades can all cause EPC faults.
12
5
Share

Where is the sensor that can detect intake air volume installed?

Automotive intake air pressure and temperature sensors are generally installed on the intake manifold of the vehicle, positioned at the top of the intake manifold to prevent water accumulation. Typically, damage to high-temperature melt pressure sensors is caused by improper installation positions. Relevant information about the intake air pressure sensor is as follows: 1. Introduction: The intake air pressure sensor (Manifold-Absolute-Pressure-Sensor), abbreviated as MAP. It connects to the intake manifold via a vacuum tube, sensing the vacuum changes within the intake manifold as the engine operates at different speeds and loads. The changes in internal resistance of the sensor are then converted into voltage signals for the ECU to adjust fuel injection volume and ignition timing angle. 2. Working principle: The intake air pressure sensor detects the absolute pressure in the intake manifold behind the throttle valve. Based on the engine speed and load, it detects changes in the absolute pressure within the manifold and converts these into signal voltages sent to the engine control unit (ECU). The ECU uses the magnitude of this signal voltage to control the basic fuel injection volume.
13
3
Share

How much fuel does running the AC on the highway consume?

Running the AC on the highway generally increases fuel consumption by about 2 liters. Reasons: The car's air conditioning accounts for about 20% of the engine's power. For a car that typically consumes 10 liters of fuel per 100 kilometers, running the AC will increase fuel consumption by about 2 liters. External factors: The higher the temperature, the higher the fuel consumption of the car's air conditioning. Dry weather also makes the car's AC consume more fuel. The higher the humidity, the higher the fuel consumption of the car's air conditioning. Using the car's AC during extremely hot and humid weather, such as in the dog days of summer, consumes more fuel than using it in dry weather, even if the external temperature is the same. Notes: Even when driving on the highway in hot weather, do not open the windows while running the AC. Opening the windows affects the car's speed, increases resistance, and leads to lower fuel efficiency and higher fuel consumption.
14
1
Share

Where is the brake light fuse for Mitsubishi Pajero?

Pajero does not have a brake light fuse. The brake light is generally installed at the rear of the vehicle, with a red main body color to enhance the penetration of the light source, so that vehicles behind can easily detect the braking of the vehicle in front even in low visibility conditions, preventing rear-end collisions. The reasons for the brake light staying on are as follows: 1. Lack of brake fluid: The lack of brake fluid is often accompanied by insufficient braking force, and in severe cases, it may even lead to a complete loss of braking power. 2. Damaged brake switch: This situation usually occurs when the brake pedal and the brake sensor switch are not properly in contact or the sensor switch is damaged. 3. Worn or aged brake pads: Worn or aged brake pads may also cause the brake light to stay on. At this time, it is necessary to check the thickness of the brake pads. If the thickness of the brake pads is below the specified value of 0.8cm, there is a high risk of them breaking during driving, which could be dangerous.
10
4
Share

How many seconds does the CF650 National Service model take to accelerate from 0 to 100 km/h?

CF650 National Service model takes about six seconds to accelerate from 0 to 100 km/h. CF National Service model: The CF National Service motorcycle is developed and manufactured by Zhejiang CFMOTO Power Co., Ltd. It integrates 27 patents, showcasing the new image of "Made in China" and "Created in Zhejiang". CF National Service design: The modified tires feature softer materials, providing better grip and adhesion. The tire pressure is also adjusted to increase the contact area, thereby enhancing the stability of the vehicle. The engine output sprocket is changed from 15 teeth to 13 teeth, and the rear sprocket is changed from 48 teeth to 54 teeth. The entire vehicle undergoes re-matching of electronic fuel injection, which helps in safe control and smooth driving at low speeds. The instrument panel is designed to be simple and elegant, including a tachometer, water temperature gauge, time display, and more. The National Service model also responds to the call for self-reliance in police equipment. The digital radio with a color display is more secure and reliable, as radio communication is essential during convoy formation driving.
16
3
Share

How much horsepower does the Ferrari SF90 have?

This car has a combined output of 1000 horsepower from its engine and electric motors. Here is more information about the Ferrari SF90: 1. The Ferrari SF90 is a plug-in hybrid supercar, equipped with a 3.9-liter twin-turbocharged V8 engine and three electric motors. 2. The 3.9-liter twin-turbocharged V8 engine in the Ferrari SF90 produces 780 horsepower and a maximum torque of 800 Nm. This engine can deliver maximum power at 7500 rpm and maximum torque at 6000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The combined power output of the three electric motors paired with this engine is 162 kW. The car is equipped with an 8-speed dual-clutch transmission, which offers extremely fast gear shifts and is also very lightweight. 3. To reduce the weight of the transmission, Ferrari eliminated the reverse gear in this model. When reversing, the car is driven by the electric motors. The Ferrari SF90 is a plug-in hybrid vehicle that uses a ternary lithium-ion battery, and its performance is exceptionally powerful.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.