Is the Boyue Pro a four-wheel drive?

What does VSC mean?

Vehicle Stability Control (VSC), also known as Anti-Skid Control System, is an active vehicle safety system developed by Toyota. It significantly enhances vehicle handling safety and driving convenience. In emergency situations such as sharp turns, sudden acceleration, or hard braking, the system quickly detects and takes appropriate braking measures, such as individually controlling each wheel while reducing engine output to maintain vehicle stability. Functions of Vehicle Stability Control System: During emergency braking, ABS prevents wheel lock-up; when wheels slip, TCS controls engine output and wheel braking to prevent skidding. When rapidly turning, swerving to avoid suddenly appearing vehicles or animals, understeer may cause the vehicle to slide outward. When oversteer causes the vehicle to cross the centerline or spin, the computer controls engine output and individual wheel braking to correct understeer or oversteer, improving dynamic stability. ESP systems are typically enabled by default in vehicles equipped with them, and usually feature a physical button to turn the ESP system off. Pressing the button deactivates ESP, while pressing it again reactivates the system. Different terms used by major automakers for electronic stability control systems: Electronic Stability Program (ESP): Developed by Bosch, used by many European automakers including Mercedes-Benz, Audi, Volkswagen, and Peugeot. Dynamic Stability Control (DSC): Primarily used by BMW, Jaguar, and Land Rover. Dynamic Stability and Traction Control (DSTC): Used by Volvo. Vehicle Stability Control (VSC): Used by Toyota, also referred to as Vehicle Skid Control. Active Stability Control (ASC): Used by Mitsubishi. Vehicle Stability Assist (VSA): Used by Honda. Vehicle Dynamic Control (VDC): Primarily used by Nissan.

12

1

Share

What does the ECO light mean?

When the ECO indicator light on the car is illuminated, it indicates that the vehicle's economy mode has been activated. ECO stands for the car's economy driving mode, also known as the economy mode. When driving frequently in congested urban traffic conditions, turning on the ECO mode can significantly improve fuel efficiency. Under ECO mode, the amount of carbon deposits in the engine is roughly the same as that produced under normal operating conditions. The main principle of ECO mode is not complicated. It primarily involves comprehensively judging and analyzing factors that affect fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the appropriate amount of fuel to supply to the engine, effectively reducing fuel consumption compared to normal driving modes. Simply put, it controls the engine's speed with reasonable gear shifts to minimize unnecessary fuel consumption. ECO is an abbreviation, with its Chinese translation representing Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO mode is further divided into active ECO driving mode and non-active ECO driving mode. When the ECO indicator light on the dashboard is illuminated, it means the vehicle's economy mode is active. ECO mode can be either active or non-active. The difference lies in the fact that the active mode has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light will illuminate, and the vehicle will automatically adjust settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active ECO mode does not have a dedicated button. When the ECO indicator light on the dashboard is illuminated, it serves merely as a reminder function. ECO automatically evaluates your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will display the ECO indicator light. Most cars use the active ECO driving mode, meaning they have their own switch button. Therefore, ECO mode can be activated during daily driving. However, it is unnecessary to activate ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of ECO mode but also affect the vehicle's power. Additionally, ECO mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing ECO mode to automatically deactivate. During idle parking or in N/P gear and manual mode, ECO mode may also become ineffective. When high torque output is required, such as when climbing hills, the engine's computer prioritizes ensuring sufficient power to drive the vehicle, and ECO mode will not function.

2

3

Share

What should be noted about ETC?

ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. ETC can be processed at bank branches or highway service areas. Required documents include the original and photocopy of the vehicle owner's valid ID card and vehicle license. If processed by a non-owner, the agent's valid ID card is also required. The photocopy of the vehicle license must include the page stamped with the most recent annual inspection seal; a bank card for deducting highway toll fees; the applicant must be aged between 18 and 60; and the vehicle must be registered under a personal name. Regarding ETC installation precautions: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have steeply angled windshields, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the anti-tamper lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues caused by the vehicle in front's ETC device malfunction, maintain a distance of over 10 meters to avoid automatic toll payment for the vehicle ahead. The ETC lane recognition speed is 20 km/h; driving too fast may result in failure to read the vehicle's device information and toll deduction failure. If using a debit card linked to ETC, insufficient balance will also cause toll deduction failure. Precautions for using ETC cards: Before passing through the toll station using ETC, ensure the ETC card is correctly inserted into the OBU. During driving, bumps may loosen the ETC card, so check it promptly and reinsert it into the OBU if necessary. The ETC card must be dedicated to the specific vehicle and cannot be arbitrarily changed after binding. Before using ETC, check the fee information displayed on the dedicated lane sign. If the card balance is insufficient, recharge it promptly. If the barrier does not lift when passing through the ETC lane, follow the instructions of the toll station staff or switch to the manual toll lane. If the ETC lane is temporarily closed at a highway toll station, use the manual toll lane for payment. The speed limit for ETC lanes is 20 km/h, and a distance of over 5 meters should be maintained from the vehicle in front. If an ETC vehicle receives a toll card in the manual toll lane, it cannot use the ETC lane when exiting the highway and must use the manual toll lane instead.

1

4

Share

What is the maximum torque capacity of the Aisin 8AT?

The maximum torque capacity of the Aisin 8AT is 400 Nm. Below is relevant information about AT transmissions: 1. Overview: AT transmissions, commonly known as mechanical transmissions, use planetary gears and torque converters to perform gear shifting operations, replacing the clutch in manual transmissions. 2. Disadvantages: The drawbacks of AT transmissions are also evident, as their complex structure and high manufacturing difficulty result in higher failure rates for this type of transmission.

5

2

Share

What maintenance is needed at 20,000 kilometers?

When a car has traveled 20,000 kilometers, it needs to replace engine oil, oil filter, air filter, cabin air filter, spark plugs, and other components. At 20,000 kilometers, a major maintenance service is not required; only a routine minor maintenance is necessary. More relevant information is as follows: 1. Car maintenance mainly involves replacing wear-and-tear parts and fluids. The wear-and-tear parts on a car include belts, spark plugs, oil filters, air filters, fuel filters, cabin air filters, batteries, brake pads, brake discs, tires, etc. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing.

7

2

Share

Can car doors drain water by themselves?

Car doors can drain water by themselves. Here is a detailed introduction to the automatic water drainage of car doors: 1. Drain valves: When vehicles leave the factory, the bottom edges of the doors are equipped with drain valves. Each door has three drain valves. When the door is closed, the drain valves are squeezed and automatically open, allowing water to drain. 2. Clogged drain valves: If the door is deformed or covered with dust, asphalt, mud, etc., the drain valves may become clogged, affecting the drainage rate. In this case, pressing the drain valve manually will widen the gap, allowing water to drain. 3. Automatic rebound of drain valves: After the three doors drain water in sequence, the drain valves will automatically rebound once the water has drained.

15

2

Share

Is the Boyue Pro a four-wheel drive?

What does VSC mean?

What does the ECO light mean?

What should be noted about ETC?

What is the maximum torque capacity of the Aisin 8AT?

What maintenance is needed at 20,000 kilometers?

Can car doors drain water by themselves?

Are There Automatic Transmission Models for Heavy Trucks?

Should a New Car Be Exposed to Sunlight?

What is the dilution ratio of concentrated windshield washer fluid to water?

What Are the Main Symptoms of Car Malfunctions?