Is the Bora a product of FAW-Volkswagen or SAIC Volkswagen?

Why can't the tricycle shift gears?

For clutches equipped with pneumatic or hydraulic boosters, if the clutch pedal feels heavy, it indicates poor performance of the booster system. Possible causes include air leaks in the pipeline system, wear of the cylinder piston seals, or poor sealing of the exhaust valve, which weaken the booster effect. The details are as follows: Reason 1: Slippage in hydraulically operated clutches is often due to insufficient free travel of the clutch pedal, causing the release bearing to press against the release lever or diaphragm and rotate with it. Adjust the return position of the clutch pedal and the length of the master cylinder push rod. Reason 2: Loose fit of the gear lever limit pin. Synchronizer damage or failure, excessive damping spring force, or prolonged vehicle inactivity can lead to severe rusting of the shift block, shift linkage, shift pin shaft, transmission differential, shift pin, and pivot bolt due to lack of lubrication.

17

5

Share

How many hours are required for Subject 2 check-in?

Subject 2 requires a daily check-in of 2 hours. The total check-in duration and related details for Subject 2 are as follows: Total check-in duration for Subject 2: You must complete 16 hours of study for Subject 2 before you can schedule the exam. However, daily practice check-in time cannot exceed 2 hours, so the study period will be five and a half days. After completing the required hours, you can schedule the exam. Therefore, the fastest possible time is seven days. Relevant regulations: Each study hour lasts 60 minutes, with effective teaching time being no less than 45 minutes. Daily theory and in-car practice cannot exceed 4 hours each. According to requirements, each subject must complete the stipulated study hours, be reviewed and approved by the road transport management department, and then transmitted to the public security traffic management internet service platform before the student can schedule the exam. Subject 2 test items: The C1/C2 driving test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving.

2

4

Share

Can You Stop During Straight-Line Driving in Subject 3?

You cannot stop during straight-line driving in Subject 3. The reasons and exam content are as follows: No stopping during straight-line driving: Naturally, you cannot stop during straight-line driving. Once the system announces the start of straight-line driving, stopping will result in failure. Therefore, before starting straight-line driving, ensure there are no obstacles ahead and maintain a distance of at least 100 meters from the vehicle in front. Only after the system announces the end of straight-line driving can you stop and perform other actions. Subject 3 exam content: The road driving skills test for Subject 3 generally includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, going straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, and night driving. The safety and civilized driving knowledge test generally includes: safety and civilized driving operation requirements, safe driving knowledge in adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.

11

5

Share

What Causes the Vehicle to Cross the Line During Parallel Parking?

When the vehicle crosses the line during parallel parking, the main reason is turning the steering wheel fully to the left too late. Below are the relevant details: Introduction to Parallel Parking: Parallel parking is a part of the driving test's Subject 2. It has become increasingly common in urban areas, especially as parking spaces in formal parking lots become more limited. Many places have designated parking spaces along the sides of streets, known as "parallel parking spots." Precautions for Parallel Parking: During parallel parking, it's essential to maintain accurate positioning. When reversing, first check the left rearview mirror to determine the right moment to adjust the steering wheel. Use the right rearview mirror to observe the distance between the rear wheel and the road, and try to avoid hitting the curb.

6

1

Share

Can any vehicle management office cancel an appointment?

Not every vehicle management office can cancel an appointment. The specific reasons why an appointment cannot be canceled and an introduction to the vehicle management office are as follows: Reasons why an appointment cannot be canceled: You need to go to the vehicle management office affiliated with your driving school to cancel the appointment. During the appointment application period, students can also log in to the online appointment platform and operate through the "Appointment Cancellation" menu, which will not affect the next stage of the exam appointment application. If a student needs to cancel after confirming the exam appointment, they can do so three working days before the scheduled exam date. The student must bring their original ID card (a temporary residence permit is required for non-local residents) or have the driving school's certification personnel go to the exam service window of the municipal vehicle management office to cancel. There must be at least one appointment cycle interval before the next appointment application. Responsibilities of the vehicle management office: The vehicle management office, officially known as the Vehicle Management Office, is primarily responsible for handling motor vehicle registration, modification, transfer, mortgage, and deregistration. It also processes applications for motor vehicle driver's licenses, replacements, renewals, inspections, and other services related to motor vehicles and drivers.

7

1

Share

Which car brand has a phoenix as its logo?

The car with a phoenix logo is the Toyota Century. Below is a detailed introduction to the Toyota Century: 1. Overview: The Toyota Century is a luxury sedan developed to commemorate the founder of Toyota, Sakichi Toyoda. It is the top-tier product in the Toyota lineup. 2. Body Dimensions: In terms of body dimensions, the Toyota Century measures 5270mm in length, 1890mm in width, and 1475mm in height, with a wheelbase of 3025mm. 3. Other Features: The Toyota Century is equipped with electronically controlled air spring suspension, anti-lock braking system (ABS), driver and passenger airbags, side-impact airbags, and other configurations. It also features back massage functionality for rear passengers.

7

4

Share

Is the Bora a product of FAW-Volkswagen or SAIC Volkswagen?

Why can't the tricycle shift gears?

How many hours are required for Subject 2 check-in?

Can You Stop During Straight-Line Driving in Subject 3?

What Causes the Vehicle to Cross the Line During Parallel Parking?

Can any vehicle management office cancel an appointment?

Which car brand has a phoenix as its logo?

Must the second retake of Subject 1 be conducted on the same day?

Which gear should be used for oncoming traffic in Subject 3?

Does canceling the appointment three times for Subject 3 affect the test?

What is the passing score for Subject 3?