Is the Bora a FAW-Volkswagen or SAIC-Volkswagen model?

1 Answers
LauraFitz
07/29/25 11:15pm
The Bora is a FAW-Volkswagen model and also a self-designed vehicle by FAW-Volkswagen. The Bora has body dimensions of 4663mm in length, 1815mm in width, and 1473mm in height, with a wheelbase of 2688mm. Its exterior follows Volkswagen's family-style design, presenting a relatively neutral appearance. The entire front grille area features a horizontal design, and the headlights are conventional yet distinctive. The Bora is equipped with two engine options: a 1.4T and a 1.5L. The 1.4T version delivers a maximum power of 110 kW and a maximum torque of 250 N·m, while the 1.5L version offers a maximum power of 85 kW and a maximum torque of 150 N·m.
Was this review help?
16
0
Share
More Forum Discussions

What Are the Reasons for a Motorcycle Losing Power When Going Uphill?

Motorcycle losing power when going uphill can be caused by: 1. Blockage in the fuel supply system or air filter, or a carburetor that hasn't been cleaned for a long time, leading to reduced engine combustion efficiency; 2. Clutch slippage causing the engine's power to not be transmitted properly; 3. Engine malfunctions, such as incorrect valve timing or excessively small valve clearance, resulting in insufficient engine power and poor uphill performance. A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel turning, known for its lightweight, agility, and speed. It is widely used for patrols, passenger and cargo transport, and as sports equipment. Motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes.
7
3
Share

What engine is used in the Dongfeng Venucia M50V?

Venucia M50V is equipped with two different engine models depending on the variant, namely the HR15 engine and the HR16 engine. Below is expanded information about Venucia engines: Brand Introduction of Venucia: Venucia is an automotive brand under Dongfeng Motor Co., Ltd., established on September 8, 2010. Leveraging the mature and reliable system capabilities and quality advantages from the joint venture between Dongfeng Motor Corporation and Nissan Motor Co., Ltd., and supported by the global technology platform of the Renault-Nissan-Mitsubishi Alliance, Venucia is dedicated to creating high-value automotive products for the Chinese market. Features of the HR16DE Engine: The power curve of the all-aluminum HR16DE engine reaches its steepest slope between 3,000 and 5,000 RPM, delivering optimal acceleration performance. Below 2,500 RPM, the slope of the power curve is slightly gentler, while above 5,000 RPM, the slope of the power curve sharply declines as the RPM increases.
14
0
Share

How many days after paying the traffic fine can the record be cleared?

Traffic fine payment effective time and record clearance time: fast takes 1 to 3 working days, slow takes 5 to 7 working days. From the occurrence of the violation, being captured, confirmed, and published, there are certain procedural steps to follow. Similarly, handling the deduction of points and paying the fine also requires going through procedures. Since the public security network and the banking network are not connected, after paying the fine, additional reconciliation time is needed. It often takes time before you can check online that the violation has been cleared. According to Article 20 of the Procedures for Handling Road Traffic Safety Violations: Within three days after the illegal act information recorded by traffic technology monitoring equipment is entered into the road traffic illegal information management system, the traffic management department of the public security organ should provide the public with query services; and can notify the motor vehicle owner or manager through mail, mobile phone text messages, email, etc.
5
5
Share

What are the causes of abnormal noise in the automotive steering system?

The causes of abnormal noise in the automotive steering system are: 1. Air entrainment in the steering system: In the suction area of the hydraulic oil pump, cavitation occurs due to low pressure. When bubbles move to the high-pressure area, their volume is compressed, and when they return to the low-pressure area, their volume increases, generating noise; 2. Noise caused by control valves: Improper matching between the flow control valve hole and the valve core, or dirt jamming the sealing area between the safety valve cone and the valve seat, as well as non-circular or defective sealing bands, can all produce noise; 3. Noise caused by mechanical vibration: When installing the steering pump, ensure that the coaxiality error between the pump shaft and the main shaft is less than 0.1mm and the inclination angle is less than 30 degrees. The steering pump speed should not be too high to avoid bearing damage and noise generation.
5
2
Share

Where are the sunroof drainage outlets on the Nissan Teana?

The Nissan Teana has a total of six sunroof drainage outlets, located on both sides of the A-pillars and C-pillars. Below is additional information about the Nissan Teana's sunroof: Functions of the sunroof: Changes the traditional ventilation method; prevents exhaust fumes from entering the car; reduces wind noise; quickly lowers the interior temperature; rapidly removes interior fogging; and provides a broader field of vision. Introduction to the Nissan Teana: Taking the 2021 Nissan Teana as an example, its body structure is a four-door, five-seat sedan. The body dimensions are: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, front and rear track both 1620mm, fuel tank capacity 61.3 liters, trunk capacity 586 liters, and curb weight 1456kg.
16
0
Share

How to Identify the Production Date on Car Glass?

Method to identify the production date on car glass: Check the lower left corner of the glass, which consists of a combination of graphics, numbers, and English letters, including the car brand, glass brand, certification mark, glass type, and production date. The numbers represent the year, and there are two rows of dots to the right of the numbers. The first row of dots represents the month, and the second row consists of dots of two different shapes. It is normal for the markings on the front and rear windshields to differ, as they are different types of glass, and the manufacturer's part numbers also vary. Generally, the glass markings are a combination of graphics, numbers, and English letters, printed in the lower left corner of the glass.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.