Is the BMW X5 a domestically produced vehicle?

1 Answers
DelAurora
07/29/25 10:59pm
BMW X5 is a domestically produced vehicle. Here is more information about domestically produced BMWs: 1. Production location: The domestically produced BMW is a joint venture established by BMW Group and Brilliance China Automotive Holdings Ltd. 2. Body dimensions: The mid-size SUV under Brilliance BMW has the following dimensions: length 4717 mm, width 1891 mm, height 1689 mm, with a wheelbase of 2864 mm. 3. Basic configuration: The BMW features front-engine four-wheel drive, with a double-joint spring strut front axle for the front suspension and a multi-link independent suspension for the rear suspension. The tire specification is 245/50R19.
Was this review help?
9
0
Share
More Forum Discussions

Do You Need to Hold the Clutch When Stopping at a Red Light on a Motorcycle?

Whether you need to hold the clutch when stopping at a red light on a motorcycle depends on the specific situation. Here are the details: 1. Short waiting time: If the waiting time is short, such as within 30 seconds, you can hold the clutch while waiting. 2. Long waiting time: If the waiting time is too long, exceeding 30 seconds or even a minute and a half, holding the clutch continuously may cause hand fatigue, as the clutch on some models is as heavy as a grip exerciser. Additionally, it may lead to clutch plate wear. For long waits, it is recommended to shift to neutral or turn off the engine.
9
1
Share

Where is the Corolla's rearview mirror folding switch located?

The Corolla's rearview mirror folding switch is located on the control panel to the left of the steering wheel. When the vehicle is stationary, pressing the rearview mirror folding button will fold them to prevent pedestrians and other vehicles from hitting them. For Corolla models not equipped with automatic rearview mirror folding, the mirrors need to be folded manually. The Corolla is a compact sedan under Toyota, equipped with two engines: one is a 1.2T turbocharged engine, and the other is a 1.8L naturally aspirated engine. The 1.2T turbocharged four-cylinder engine has a maximum power output of 85kW and a maximum torque of 185Nm, while the 1.8L naturally aspirated engine delivers a maximum power of 72kW and a maximum torque of 142Nm.
5
2
Share

Where is the engine number of the Tiggo 5 located?

The engine number of the Tiggo 5 is located on the engine block, while the chassis number is stamped on the right side of the front compartment drainage channel and on the instrument panel near the windshield. Taking the 2017 Tiggo 5 as an example, it is a compact SUV with body dimensions of 4506mm in length, 1841mm in width, and 1740mm in height, a wheelbase of 2610mm, and a curb weight of 1498kg. The 2017 Tiggo 5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 152PS, a maximum torque of 205Nm, and a maximum power of 112kW, paired with a 5-speed manual transmission.
1
2
Share

What is the lifespan of the 1.4T turbocharger in the Sagitar?

The lifespan of the 1.4T turbocharger in the Sagitar is approximately 200,000 to 300,000 kilometers. The lifespan of the turbocharger is equivalent to that of the engine. Taking the 2021 Sagitar 1.4T as an example, it belongs to the compact car category with the following dimensions: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, fuel tank capacity 50 liters, and curb weight 1410kg. The 2021 Sagitar 1.4T features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L turbocharged engine delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
1
2
Share

What are the reasons for high RPM in a three-cylinder turbocharged engine?

The reasons for high RPM in a three-cylinder turbocharged engine are: 1. Stuck idle control valve; 2. Faulty engine coolant temperature sensor; 3. Engine computer malfunction; 4. Improper idle adjustment; 5. Throttle malfunction; 6. Intake pipe leakage. The solutions for high RPM in a three-cylinder turbocharged engine are: 1. Adjust the throttle opening; 2. Replace the fuel injector, air conditioning clutch, intake system, and engine. The maintenance methods for the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the radiator scale; 4. Regularly remove engine carbon deposits; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable RPM.
10
2
Share

Should You Shift Gear or Engage the Handbrake First When Getting in the Car?

When getting in the car, you should shift gear first and then engage the handbrake. This is to prevent the car from rolling back when starting on an uphill slope. The correct method to engage the handbrake is: 1. Press the handbrake button before pulling it up; 2. Apply gentle force when pulling the handbrake; 3. The handbrake should be engaged to about 70% of its full capacity, as pulling it all the way to the top will shorten the lifespan of the handbrake cable. The dangers of forgetting to engage the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake disc and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake caliper fluid, leading to brake failure.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.