Is the BMW X3 domestically produced?

Why are some car license plates green?

Some license plates are green because: Green license plates are a new type of plate specially designed by the state for easier differentiated management, used to quickly distinguish between traditional fuel vehicles and new energy vehicles. The format of green new energy license plates is: regional abbreviation plus area code letter plus pure electric or hybrid letter plus numbers. For small new energy vehicles, the first character of the special license plate uses the letters D or F (D represents pure electric new energy vehicles, F represents plug-in hybrid electric vehicles and fuel cell vehicles, which are non-pure electric new energy vehicles). For large new energy vehicles, the sixth character of the special license plate uses the letters D or F (D and F represent the same vehicle types as those for small new energy vehicle special license plates).

2

4

Share

Is the MG 5 a three-cylinder or four-cylinder engine?

MG 5 is equipped with a four-cylinder engine. The MG 5 comes with two engine options: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine in the MG 5 delivers 120 horsepower and a maximum torque of 150 Nm, with the maximum power achieved at 6,000 rpm and the maximum torque at 4,500 rpm. Here are some precautions for using a car engine: 1. Avoid coasting in neutral: The engine itself has a deceleration fuel cut-off function, and coasting in neutral is not conducive to fuel economy. 2. Pay attention to observations while using the vehicle: If you notice oil on the ground, determine whether there is an engine oil leak and promptly communicate with the car dealership to eliminate potential safety hazards. 3. For vehicles equipped with a turbocharger: Do not turn off the engine immediately after high-speed driving or climbing a slope; let it idle for 10 minutes before shutting it down. Turbocharged vehicles accumulate carbon deposits several times faster than naturally aspirated vehicles. 4. If brake fluid is contaminated with water or impurities: Or if you notice sediment in the brake fluid, replace it promptly or filter it carefully. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.

18

2

Share

Does the Volkswagen Polo have a reversing camera?

The Volkswagen Polo does not come with a reversing camera, but it can be installed as an aftermarket accessory. A reversing camera uses a wide-angle infrared camera installed at the rear of the vehicle, displaying a clear view of obstacles behind the car on an in-car screen. The reversing camera is also known as a parking assist system, reverse visual system, or vehicle monitoring system, and is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. The Volkswagen Polo features a MacPherson strut front suspension and a semi-independent non-drive axle rear suspension. It is powered by a 1.5L naturally aspirated engine, which delivers a maximum power of 83 kW and a maximum torque of 145 Nm.

4

3

Share

What Does Vehicle Suspension Stiffness Adjustment Mean?

Vehicle suspension stiffness adjustment refers to the ability to manually adjust the softness or firmness of a car's suspension. However, with advancements in technology, the operational state of a car's suspension can now be adjusted automatically. The suspension system used in vehicles affects both comfort and handling. Suspension stiffness adjustment can be either manual or automatic. During driving, the driver can adjust the suspension's stiffness via buttons inside the car. At high speeds, the suspension can become firmer to enhance the vehicle's stability. When driving on bumpy roads, the suspension softens to filter out minor vibrations, thereby improving comfort. During high-speed cornering, the shock absorber's resistance automatically increases to reduce body roll.

20

1

Share

Is Overtaking Allowed at Pedestrian Crossings?

Overtaking is not permitted at pedestrian crossings. When vehicles are traveling in the same lane, the following vehicle should maintain a safe distance from the vehicle ahead to allow for emergency braking. According to Article 47 of the Road Traffic Safety Law of the People's Republic of China: When passing through a pedestrian crossing, motor vehicles should slow down; if pedestrians are crossing, the vehicle must stop and yield. On roads without traffic signals, motor vehicles must yield to pedestrians crossing the road. When overtaking, the driver should first turn on the left turn signal, switch between high and low beams, or sound the horn. On roads without a center line or with only one lane in the same direction, the vehicle ahead should reduce speed and move to the right to allow overtaking when safe. The overtaking vehicle should pass on the left after ensuring a sufficient safe distance and, after establishing the necessary distance, turn on the right turn signal and return to the original lane. According to Article 43(4) of the Road Traffic Safety Law of the People's Republic of China, overtaking is prohibited under the following circumstances: When the vehicle ahead is making a left turn, performing a U-turn, or overtaking; When there is a possibility of encountering oncoming traffic; When the vehicle ahead is an emergency vehicle such as a police car, fire truck, ambulance, or engineering rescue vehicle performing urgent duties; When passing through areas with no safe overtaking conditions, such as railway crossings, intersections, narrow bridges, curves, steep slopes, tunnels, pedestrian crossings, or sections of urban roads with heavy traffic.

16

4

Share

What Do the Yellow and Red Dots on New Tires Mean?

New tires have a yellow dot indicating the lightest point on the tire, while a red dot marks the heaviest point. Here's a detailed explanation: During tire manufacturing, it's impossible for every section to have identical weight distribution. Therefore, manufacturers mark the lightest and heaviest points on the tire. Tires operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during driving. Consequently, they must possess high load-bearing capacity, traction performance, and shock absorption capabilities. Typically mounted on metal rims, tires support the vehicle body, absorb external impacts, maintain road contact, and ensure optimal driving performance.

16

5

Share

Is the BMW X3 domestically produced?

Why are some car license plates green?

Is the MG 5 a three-cylinder or four-cylinder engine?

Does the Volkswagen Polo have a reversing camera?

What Does Vehicle Suspension Stiffness Adjustment Mean?

Is Overtaking Allowed at Pedestrian Crossings?

What Do the Yellow and Red Dots on New Tires Mean?

What is the fuel tank capacity of the 2009 Classic Focus?

What Type of Vehicle is the Regal?

Is the Lingpai 1.8 a three-cylinder or four-cylinder engine?

How to Apply Color Change Film to BMW 1 Series?