Is the BMW X1 Dash Cam Hidden?

Can I use a temporary ID card if I lost my ID for the Subject 3 driving test?

A temporary ID card can be used for the Subject 3 driving test. Temporary ID cards have the same legal validity as regular ID cards and can be used as a substitute within their 3-month validity period. Therefore, there is no issue with using a temporary ID card for the Subject 3 test. According to the Ministry of Public Security's Order No. 91 and related regulations, candidates taking the driver's test must present a valid ID, which can be either a resident ID card or a temporary resident ID card. If your ID card is lost, you can apply for a temporary resident ID card as soon as possible. During the period when citizens are applying for, renewing, or replacing their resident ID cards, if they urgently need to use an ID, they can apply for a temporary resident ID card. The public security authorities should process the application promptly in accordance with regulations. Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license examination, commonly referred to as the road driving skills and safe driving knowledge test. The full score is 100, with a passing score of 90. One retake is allowed on the spot. If the retake is failed, the candidate can reschedule after 10 days. The road driving skills test for Subject 3 includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Subject 3 test precautions: Starting: Close the door, fasten the seatbelt, turn on the left signal, shift to 2nd gear, honk three times, check the left rearview mirror, slowly release the clutch, apply gas, and release the parking brake to start without rolling back. Going straight at intersections: Speed should not exceed 30 or be below 20; crossing the yellow line is prohibited. Bus stops: Speed should not exceed 30 or be below 20; crossing the yellow line is prohibited. Turning right at intersections: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20; crossing the line is prohibited. Changing lanes: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20; crossing the lane line is prohibited. Overtaking: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20; crossing the lane line is prohibited. Turning left at intersections: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20; crossing the line is prohibited. Passing school zones: Speed should not exceed 30 or be below 20; crossing the line and honking are prohibited. Driving straight: Shift to 5th gear when speed exceeds 40; speed should be above 40; crossing the line is prohibited. Accelerating: Shift to 5th gear when speed exceeds 40; speed should be above 40; crossing the line is prohibited. Making a U-turn: Choose an appropriate section, turn on the right signal, move to the far-right lane, stop, turn on the left signal, shift to 2nd gear, and make a two-forward-one-reverse U-turn without rolling back. Pulling over: Turn on the right signal for 3 seconds, pull over, ensure the right wheel is no more than 30 cm from the roadside, engage the parking brake, and shift to neutral. Subject 3 scoring criteria: The following situations result in immediate failure: Not wearing a seatbelt as required; Blocking or turning off in-car audio/video monitoring devices; Not following the examiner's instructions; Rolling back more than 30 cm when starting; Mismatch between gear and speed for an extended period, causing engine RPM to be too high or too low; Failing to shift gears twice in a row while driving; Coasting in neutral while driving; Not following traffic signals, signs, or markings; Not driving at the required speed; Driving over the solid center line or solid lane edge line; Driving on the lane divider for more than 15 seconds; Changing two or more lanes consecutively; Parking in no-parking zones such as crosswalks or grid areas; Candidate not attending the test at the scheduled time. The following situations result in a 10-point deduction: Rolling back less than 30 cm when starting; Shifting to the wrong gear when starting or driving; Not using or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking; Turning the steering wheel less than 3 seconds after activating the turn signal; Stalling the engine once due to improper operation. Vehicle preparation: Failing to walk around the vehicle counterclockwise to inspect the vehicle and surroundings results in failure. The following situations during starting result in immediate failure: Starting with insufficient brake pressure; Starting with the door not fully closed; Starting the engine with the gearshift not in neutral; Starting without releasing the parking brake and not correcting it in time. The following situations result in a 10-point deduction: Starting without releasing the parking brake but correcting it in time; Not releasing the ignition switch promptly after starting the engine. Gear shifting: Failing to shift gears smoothly as instructed results in failure; Mismatch between speed and gear results in a 10-point deduction. Pulling over: Parking with the vehicle body over the right edge line or crosswalk results in failure; Not closing the door after exiting the vehicle results in failure; Parking with the vehicle body more than 30 cm from the right edge line or sidewalk results in a 10-point deduction; Not engaging the parking brake after parking results in a 10-point deduction; Releasing the foot brake before engaging the parking brake results in a 10-point deduction; Not turning off the engine before exiting the vehicle results in a 5-point deduction. Going straight through intersections, turning left, or turning right: Failing to slow down or stop to observe as required results in failure. Passing crosswalks, school zones, or bus stops: Failing to slow down as required results in failure.

8

5

Share

What are the reasons for a car failing to start?

Reasons for a car failing to start: 1. The vehicle is out of fuel, with the fuel gauge showing below the red line, causing failure to start; 2. The car battery is dead, due to reasons like leaving headlights on for a long time or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years; 3. For automatic transmission vehicles, the gear must be in P (Park) or N (Neutral) when starting. If it's in R (Reverse) or D (Drive), the car will not start; 4. The owner added water or low-quality antifreeze to the car, causing the entire cooling system to freeze in extremely cold winter conditions. This can lead to the engine cracking, the water pump failing to operate, resulting in failure to start and damage to other engine components.

13

5

Share

How to Use Air Conditioning While Parked?

When using the air conditioning during a parked break, the duration should not be too long. Even when in use, switch to external air circulation every 30 minutes to maintain airflow and prevent oxygen deprivation. Here are some relevant tips: 1. Choose an open area: When parking, select an open area to avoid exhaust fumes being recirculated into the car. 2. Activate external air circulation: When using the air conditioning while parked, switch it to external air circulation mode. This allows fresh outside air to enter the vehicle promptly, facilitating air exchange. 3. Open the windows slightly: Lower each window by 3-5 cm from the top. This slight opening on all four windows creates better ventilation and helps prevent carbon monoxide poisoning.

7

2

Share

Can I get a driver's license at the nominal age of 18?

No, you cannot get a driver's license at the nominal age of 18 because you are not actually 18 years old. According to the regulations on the application and use of motor vehicle driving licenses, the minimum age requirement for ordinary household vehicles is 18 years old. Only those who meet the age requirement and certain physical conditions can apply for a motor vehicle driving license. The full name of the driver's license is the motor vehicle driving license, also known as a 'driver's license.' It is a legal document required for driving motor vehicles in accordance with the law. In China, a driver's license is defined as a legal certificate issued by the administrative authorities after passing the required tests, which allows qualified individuals who have studied and mastered traffic regulations and driving skills to legally operate certain types of motor vehicles.

5

1

Share

What is the principle of a CVT transmission?

The principle of a CVT transmission: In its transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the smaller pulley, which drives the larger pulley via the steel belt. A CVT mainly consists of two sets of pulleys (drive pulley and driven pulley), a transmission belt (steel belt), an oil pump, a torque converter, actuators (valve body, oil circuit), sensors, a computer, and other components. CVT directly translates to "continuously variable transmission," commonly known as a stepless transmission. It does not have specific fixed gear ratios, and its operation is similar to an automatic transmission. However, the variation in speed ratios differs from the gear-shifting process of an automatic transmission—it is continuous, ensuring smooth and uninterrupted power delivery.

12

2

Share

What are the reasons for the oil pressure warning light coming on when there is sufficient oil?

Reasons for the oil pressure warning light coming on when there is sufficient oil: 1. The engine temperature is too high, which can thin the oil, causing it to leak excessively through the gaps and leading to a drop in oil pressure; 2. If the oil pump components are damaged or have excessive gaps due to wear or assembly issues, it can result in the oil pump failing to deliver oil or delivering insufficient oil; 3. The fit clearance between the crankshaft and the big or small bearings can affect oil pressure—too tight increases pressure, while too loose decreases it; 4. Blockages in the oil filter or oil suction screen can also reduce oil pressure; 5. Using the wrong oil or an incorrect oil grade can cause excessive leakage due to low oil viscosity during engine operation, thereby reducing oil pressure.

12

0

Share

Is the BMW X1 Dash Cam Hidden?

Can I use a temporary ID card if I lost my ID for the Subject 3 driving test?

What are the reasons for a car failing to start?

How to Use Air Conditioning While Parked?

Can I get a driver's license at the nominal age of 18?

What is the principle of a CVT transmission?

What are the reasons for the oil pressure warning light coming on when there is sufficient oil?

What to Do If the Water Pump Seal in a Car is Leaking?

What type of engine oil does the Sylphy use?

What are the damages to a car when driving onto a curb?

What transmission does the Lexus ES use?