Is the BMW M140i considered an M car?

How Many Degrees is Half a Turn of the Steering Wheel?

Half a turn of the steering wheel is 180 degrees. Below is an introduction to issues related to friction sounds when turning the steering wheel: 1. Lack of lubrication in the shock absorber's thrust bearing: Listen near the hood to see if the sound is coming from the top of the shock absorber. If the thrust bearing is making noise, you can apply some grease to it. If the noise persists after greasing, the bearing must be replaced. 2. Loose stabilizer bar bushings: Check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving over uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced.

7

1

Share

Will the C1 Subject 2 Test Add More Items?

C1 has 5 test items: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves). C2 is the same as C1 except for the cancellation of stopping and starting on a slope. A1, A2, A3, B1, and B2 test items include stake driving, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a limited-width gate, passing continuous obstacles, driving on bumpy roads, narrow-road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. The Subject 2 test is scored out of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The Subject 2 test can be taken once, and if failed, a retake is allowed. If the retake is not taken or is still failed, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills must not exceed five. If the fifth scheduled test is still failed, the results of other previously passed subjects will be invalidated.

7

5

Share

What does the EPC light on the Volkswagen Polo dashboard mean?

EPC (Electronic Power Control) stands for Engine Electronic Power Control System. When a sensor malfunctions or detects an abnormal condition, the control system will take corresponding measures according to the preset program. Common reasons for the EPC light to appear on your vehicle include: Dirty throttle body - The throttle body should be cleaned. Brake light failure - The brake switch and wiring should be checked. Fuel quality issues. Engine stalling due to improper operation. Intake system faults such as leaks or blockages. When the EPC light comes on, you should promptly visit a 4S shop or professional auto repair shop to have a technician read the fault codes with diagnostic equipment and perform targeted repairs after identifying the problem. Detailed explanations of other situations that may cause the EPC light to illuminate: Engine intake system faults: The EPC light will activate when the engine intake is obstructed or insufficient. Throttle body faults: Carbon buildup is a common throttle body issue. Contamination can also affect air intake and trigger the warning light. Fuel system faults: Such as substandard fuel, deteriorated fuel, or poor fuel atomization. Engine faults: Insufficient engine pressure or issues with components like intake valves in the powertrain can also activate the EPC light. ECU control unit faults: Such as interference with the vehicle computer signals or false alarms from the computer. Brake light faults: Including non-functional brake lights, faulty brake switches, or brake wiring issues. Solutions for when the vehicle's EPC light illuminates: Troubleshoot intake system issues, use fuel with appropriate octane rating, clean the throttle body, etc. Remove carbon deposits from relevant components. Re-flash relevant ECU data. If the EPC light comes on, the owner can first try turning off the engine and restarting it to see if the EPC light remains illuminated. If it doesn't come back on, there may be no issue - the EPC light might have been affected temporarily. If the EPC light stays on or frequently illuminates, drive to the nearest service point for professional diagnostic help to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, literally translated as electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When sensor data becomes abnormal, the EPC system will take measures regarding the powertrain according to preset programs. Common EPC indicator lights generally display in two colors: yellow and red. A yellow EPC warning light means the vehicle can still operate normally but should proceed slowly to a repair point for inspection. A red EPC warning light indicates a more serious situation - the vehicle should be pulled over immediately and relevant repair personnel contacted for service. Continuing to drive could directly affect core vehicle components or driving safety.

16

3

Share

What are the detailed deduction items for the automatic transmission subject 2 exam?

Exam deduction items include not wearing a seatbelt, deduct 100 points; not closing the car door properly, deduct 100 points; not turning on the turn signal, deduct 100 points. There are 3 key driving tips for automatic transmission vehicles: 1. Waiting at red lights: Depending on driving habits, temporarily stop by pressing the brake while keeping the gear in D, as the torque converter in the transmission has a reaction wheel with a one-way clutch that amplifies torque from the engine crankshaft. It does not rotate at engine idle and only engages when engine speed increases; 2. Starting: Press the brake pedal to move the gearshift from P or N to driving gears. Release the brake pedal, and the vehicle will start moving slowly. The purpose of pressing the brake in advance is to ensure the safety of the driver and the vehicle; 3. Starting the engine: The engine can only be started when the gearshift is in P or N position. If the gearshift is in driving gears like D, R, etc., the engine cannot be started.

12

5

Share

What are the reasons for insufficient power in the eighth-generation Accord?

Insufficient power is mainly caused by poor combustion quality, with the primary reasons as follows: 1. Poor atomization quality due to inadequate fuel injection: This is mainly caused by gum deposits in the fuel clogging the fuel injectors and the entire fuel injection system. 2. Excessive carbon buildup: Excessive carbon deposits can cause varying degrees of knocking, which results in a noticeable loss of power. 3. Excessively high air-fuel ratio: The air-fuel ratio refers to the proportion of fuel to air. An excessively high air-fuel ratio means there is too much air and too little fuel during the mixture, naturally leading to insufficient power. The air-fuel ratio is adjusted by the computer system based on combustion quality. When the computer system detects poor combustion quality, it increases the air intake to ensure proper exhaust emissions after combustion.

17

4

Share

What is the fuel tank capacity of Buick business vehicles?

The fuel tank capacities of Buick business vehicles are as follows: 1. Buick LaCrosse: The fuel tank capacity is 60 liters. It meets the China VI emission standards, and the engine can switch between "four-cylinder high-performance mode," "four-cylinder economy mode," and "two-cylinder ultra-economy mode" based on actual driving conditions, with a fuel consumption of 6.9L per 100 kilometers. 2. Buick Regal: The fuel tank capacity is 55/62 liters. The Buick Regal is equipped with a 2.0T SIDI or 1.5T SIDI direct-injection turbocharged engine, paired with a 9-speed HYDRA-MATIC intelligent transmission, meeting the higher demands of the new generation of middle-class families. 3. Buick Verano: The fuel tank capacity is 52 liters. The new car offers two powertrain options: a 1.3T SIDI direct-injection turbocharged engine with a CVT intelligent continuously variable transmission or a 1.0T direct-injection turbocharged engine with a 6-speed DSS intelligent transmission, delivering maximum power outputs of 121kW at 5600rpm and 92kW at 5800rpm, respectively. 4. Buick Excelle GT: The fuel tank capacity is 44 liters. The Buick Excelle GT is equipped with GM's new-generation 1.3T Ecotec dual-port injection turbocharged engine and features a four-wheel independent suspension system. 5. Buick Excelle: The fuel tank capacity is 44 liters. The new car adopts the latest family design language and introduces GM's new-generation 1.3T/1.0T Ecotec dual-port injection turbocharged engine for the first time.

5

Share

Is the BMW M140i considered an M car?

How Many Degrees is Half a Turn of the Steering Wheel?

Will the C1 Subject 2 Test Add More Items?

What does the EPC light on the Volkswagen Polo dashboard mean?

What are the detailed deduction items for the automatic transmission subject 2 exam?

What are the reasons for insufficient power in the eighth-generation Accord?

What is the fuel tank capacity of Buick business vehicles?

Where is the BMW tow hook located?

What is the size of the driver's license photo?

How long does it take to get delivery of the BYD Qin Plus DM-i?

Why was the Volkswagen Lavida Hatchback discontinued?