Is the BMW 5 Series New Energy a Plug-in Hybrid Vehicle?

How to Remove the Spare Tire of an Outlander?

Outlander spare tire removal steps are as follows: 1. Open the trunk and locate the tool compartment on the right side of the trunk, then open it; 2. Remove the cover plate, which comes with two tire removal tools; 3. Use a pry bar to lift the cover plate next to the trunk latch; 4. Loosen the lifting bolt of the spare tire bracket with a socket wrench; 5. Remove the hook connected by the bolt, and the spare tire will slide out, completing the removal. The spare tire of the Mitsubishi Outlander is a full-size tire. However, even if it is a full-size spare tire, its speed rating and load index may not be the same. It can only serve as a temporary replacement in emergencies until the regular tire arrives.

1

5

Share

What is the difference between antifreeze colors?

Antifreeze comes in three colors. The main components of antifreeze are ethylene glycol, propylene glycol, and diethylene glycol. Ethylene glycol is generally green, propylene glycol is red with a hint of orange, and diethylene glycol is blue. The primary function of antifreeze is to protect the engine and ensure its normal and efficient operation. It circulates within the engine radiator, providing anti-freeze, anti-boil, anti-rust, and anti-corrosion effects. Antifreeze is colored red or green to make it easier to detect leaks or to distinguish it from other engine fluids, preventing confusion. Below are some precautions for using antifreeze: 1. Choose antifreeze according to the specific requirements of your vehicle. Imported vehicles, domestically produced vehicles, and mid-to-high-end vehicles should use permanent antifreeze (lasting 2-3 years). 2. Select antifreeze based on the number and concentration of vehicles. For units or departments with a large number of vehicles that are relatively concentrated, opt for small-packaged antifreeze concentrate, which is easier to transport and store. 3. Choose antifreeze with rust-proof, anti-corrosion, and descaling capabilities. The most critical aspect of antifreeze is its anti-corrosion properties. Opt for reputable brand products, as they contain additives like corrosion inhibitors, rust inhibitors, scale inhibitors, and cleaning agents, ensuring product quality.

6

5

Share

What Causes the Engine Light to Keep Flashing?

Here are the reasons why the engine light keeps flashing: 1. Excessive carbon buildup in the throttle or engine. 2. Malfunction of the oxygen sensor leading to an imbalance in the air-fuel mixture ratio. This phenomenon is common when driving at low speeds in urban areas for extended periods. 3. Fuel injector leakage, causing the injector to remain in the fuel supply state even after releasing the accelerator, resulting in an overly rich mixture at low speeds and unstable idle after releasing the throttle. In severe cases, the engine may stall directly. 4. Use of low-quality gasoline with excessive metal content, leading to oxygen sensor poisoning.

2

1

Share

How to Turn Off Mazda's i-stop Auto Start-Stop System?

Mazda i-stop auto start-stop system deactivation method: There is an i-stop button on the vehicle's center console. Press and hold this button until the dashboard indicator turns yellow, indicating the auto start-stop system has been deactivated. For i-stop to function normally, besides the vehicle being stationary and having sufficient battery power, several other conditions must be met. Below are the additional requirements for i-stop operation: 1. Ambient temperature must be between -10°C and 50°C (to prevent excessive air conditioning system load). 2. The vehicle must be on a slope not exceeding 8 degrees or on level ground (automatically sensed by the vehicle) (to prevent rolling backward or forward when releasing the brake). 3. Both engine and transmission must reach operating temperature. 4. The gear must be in D position. 5. The front windshield defroster must be turned off.

18

3

Share

Does the JAC Refine M3 throttle need to be matched?

After cleaning the throttle of the JAC Refine M3, it needs to be rematched. If not reset after cleaning, the throttle opening will remain in the pre-carbon-deposit state, increasing the air intake, which can lead to unstable idling and excessively high engine speed. The method for matching the JAC Refine M3 throttle is as follows: 1. First, turn the key to the power supply position, but do not start the car; it should remain in the off state. 2. After leaving it for about 10 seconds, quickly press the accelerator pedal all the way down, making sure to press it down quickly and completely, and hold it for 15 seconds before quickly releasing it. 3. Finally, turn off the ignition, remove the key, and leave it for about 15 seconds.

9

3

Share

What Causes the Car Key to Get Stuck?

Here are the reasons why a car key might get stuck and the corresponding solutions: 1. The gear shift is not fully returned to the P (Park) position, failing to trigger the electronic sensor: Start the car, shift the gear again, and ensure it is fully returned to the P position, then the key can be removed. 2. Obstructions like coins in the gear slot preventing it from returning: Check the gear slot for any foreign objects and remove them. Additional information: Reasons and solutions for the car key not turning after insertion: Reason: The car's steering wheel automatic lock function activates if the steering wheel is accidentally turned or the wheels are not aligned after parking and turning off the engine, causing the steering wheel to lock. Solution: Gently turn the key with your right hand while lightly turning the steering wheel with your left hand to unlock the steering wheel, allowing the key to turn.

20

3

Share

Is the BMW 5 Series New Energy a Plug-in Hybrid Vehicle?

How to Remove the Spare Tire of an Outlander?

What is the difference between antifreeze colors?

What Causes the Engine Light to Keep Flashing?

How to Turn Off Mazda's i-stop Auto Start-Stop System?

Does the JAC Refine M3 throttle need to be matched?

What Causes the Car Key to Get Stuck?

What are the body dimensions of the Audi A4L?

What is a Plug-in Hybrid Electric Vehicle?

Haval H6 Vehicle Dimensions

What Causes the ESC Malfunction Preventing the Car from Starting?