Is the BMW 4 Series Made of Aluminum Body?

1 Answers
StAnthony
07/30/25 3:30am
The BMW 4 Series features an aluminum body, with only some components made of aluminum alloy. Many of the exterior panels on BMW vehicles incorporate aluminum alloy. The BMW 4 Series is a coupe model under the BMW brand, available in two-door hardtop, two-door convertible, and four-door hardtop versions. The BMW 4 Series is equipped with three engine options: a low-power 2.0-liter turbocharged engine, a high-power 2.0-liter turbocharged engine, and a 3.0-liter inline-six turbocharged engine. The low-power 2.0-liter turbocharged engine delivers a maximum power of 184 horsepower and a torque of 270 Nm, reaching peak power at 5,000 rpm and maximum torque between 1,350 rpm and 4,600 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
10
1
Share
More Forum Discussions

Can Automatic Headlights Be Left On for a Long Time?

Automatic headlights can be left on for a long time. Automatic headlights, also known as automatic light-sensing headlights, are primarily controlled by an ambient light sensor that manages the headlights' operation. The ambient light sensor detects external light levels to control the car's headlights—when the surrounding light falls below a certain threshold, the headlights will turn on, and when the ambient brightness exceeds a certain level, the headlights will automatically turn off. During daily driving, it is important to inspect the car's headlights, especially by testing the ambient light sensor. Cover the ambient light sensor to see if the headlights respond. If the headlights do not react, it may indicate a malfunction, and the owner should promptly check to ensure the headlights are functioning properly.
20
2
Share

What is the difference between a rotary engine and a traditional reciprocating engine?

The differences between a rotary engine and a reciprocating engine: 1. Different expansion pressure: The expansion pressure of a rotary engine acts on the sides of the rotor, with the three faces of the rotor pushing toward the center of the eccentric shaft; the expansion pressure of a reciprocating engine pushes downward, transmitting mechanical force to the connecting rod to drive the crankshaft rotation. 2. Different motion processes: The rotary engine completes the four processes of intake, compression, combustion, and exhaust within a trochoidal housing; the reciprocating engine performs all four processes within a single cylinder. The displacement of a rotary engine is typically expressed using the unit working chamber volume and the number of rotors. Unit working chamber volume refers to the difference between the maximum and minimum volumes of the working chamber; the compression ratio is the ratio of the maximum volume to the minimum volume. The same definitions are used for reciprocating engines.
7
1
Share

What are the advantages of manual transmission?

Manual transmission cars have benefits such as being cheaper and more economical; the transmission technology is mature, etc. Here is a detailed explanation: Advantages of manual transmission: Manual transmission is relatively cheaper than automatic transmission, making it more economical; manual transmission cars have mature transmission technology, high reliability, and lower maintenance and repair costs compared to AT automatic transmissions; since it is fully manual without electronic assistance, it is purely mechanical, resulting in a much lower failure rate. The same model with manual transmission is slightly heavier than the automatic version, making the vehicle more stable. Gear shifting introduction: Manual cars can upshift earlier as needed and can also coast, which is especially suitable for city driving, making them more fuel-efficient; they have faster acceleration, allowing for more agile maneuvering and often better at avoiding hazards.
3
2
Share

Is the Haval H6 a four-wheel drive vehicle?

Haval H6 is not a four-wheel drive vehicle; all its models are front-engine, front-wheel-drive (FWD) versions. The advantages of front-wheel drive include simple mechanical structure, good engine cooling conditions, spacious interior, easy layout, reduced overall vehicle weight, better fuel efficiency, and convenient maintenance. The Haval H6 is a flagship model under the Haval brand, with body dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm. In terms of appearance, the Haval H6 features dynamic micro-curves to outline the side profile of the body, creating a sharp and poised momentum. The vehicle is equipped with LED intelligent headlights and wrapped wheel arch designs, which are stylish and dynamic, pursuing a sense of technology and futurism while maintaining an air of sophistication and stability.
16
3
Share

Does the Haval H6 have four-wheel drive?

Haval H6 does not have four-wheel drive, its drivetrain is front-engine, front-wheel drive, which means the engine is positioned at the front and the front wheels drive the entire vehicle. As an urban SUV, the Haval H6's appearance breaks away from the heavy off-road style of previous models, adopting a new design that appeals more to mainstream consumers. The overall design is bold and stable, with straight roof lines ensuring excellent headroom. The Haval H6 measures 4640 mm in length, 1825 mm in width, and 1690 mm in height, with a wheelbase of 2680 mm. It is equipped with a 1.5GDITEVO engine, with an expanded maximum torque output range of 1400 to 3600 rpm, paired with a second-generation 7DCT transmission, achieving a comprehensive transmission efficiency of up to 95.6%.
16
2
Share

What are the differences between Camry 240V and 240G?

Toyota Camry 240G and 240V have the following differences: 1. Xenon headlights: Toyota Camry 240V is equipped with xenon headlights and a four-way adjustable leather steering wheel, while Toyota Camry 240G does not have xenon headlights. 2. AFS smart adaptive front lighting system, VSC vehicle stability control system, and TRC traction control system: Compared to the 240G, Toyota Camry 240V adds AFS smart adaptive front lighting system, VSC vehicle stability control system, and TRC traction control system. 3. Smart key and one-touch start system: Toyota Camry 240V has a smart key and one-touch start system. When the smart key is within 0.7 meters of the car, the doors and interior lighting system will unlock automatically, while Toyota Camry 240G does not have a one-touch start system.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.