Is the BMW 4 Series Made of Aluminum Alloy Body?

1 Answers
DiMia
07/29/25 5:48pm
The BMW 4 Series only uses aluminum alloy for some components; this model does not feature an all-aluminum body. Below is relevant information about the BMW 4 Series: 1. The BMW 4 Series is a coupe under the BMW brand, available in hardtop two-door, convertible two-door, and hardtop four-door versions. Many of BMW's vehicles incorporate aluminum alloy for some of their body panels. 2. The BMW 4 Series is equipped with three types of engines: a low-power 2.0-liter turbocharged engine, a high-power 2.0-liter turbocharged engine, and a 3.0-liter inline six-cylinder turbocharged engine. These engines feature direct fuel injection technology and utilize aluminum alloy cylinder heads and blocks.
Was this review help?
13
4
Share
More Forum Discussions

At what position should the front of the car turn left or right?

Ensure that the front of the car is at least 2 meters away from obstacles, then you can safely turn left or right without the right front corner of the car hitting any obstacles. Here is some extended information about vehicle turning: Low-speed approach: When approaching an intersection to turn, always reduce speed in advance to avoid the danger of losing control due to turning at excessive speed. Wide and narrow turns: When making a right turn at an intersection, try to take a narrow turn to avoid interfering with the normal movement of vehicles going straight. For left turns at intersections, opt for a wide turn whenever possible, as the wider turn provides better visibility and makes it easier to observe surrounding road conditions. If there is a vehicle ahead in your lane, you can follow the path taken by the leading vehicle to judge your own turning trajectory.
18
3
Share

Which Part of the Car Should Not Be Submerged in Water, the Front or the Rear?

Both the front and rear of the car should not normally be submerged in water. The front mainly includes the engine compartment, while the rear contains the exhaust pipe. Below is extended information about water damage to cars: Submersion while stationary: If a vehicle is submerged while stationary, the engine is generally not damaged, and the owner can claim compensation if they have purchased vehicle damage insurance. However, if the owner attempts to start the car and drive it out of the submerged area, causing engine damage, even if they have purchased water submersion insurance, the claim will not be honored. Malfunction while driving through water: If the owner has purchased water submersion insurance, also known as engine special loss insurance, they can file a claim with the insurance company. If only vehicle damage insurance is purchased without water submersion insurance, only parts other than the engine can be compensated. Engine damage caused by restarting the engine while submerged will not be covered by insurance, even if water submersion insurance is purchased.
10
4
Share

Can a Car Key Still Be Used After Falling into Water?

Car keys can still be used after falling into water, as modern car keys are designed with waterproof features. If handled promptly after getting wet, they can continue to function. Here is extended information about car keys falling into water: Do not activate immediately: Avoid pressing any buttons on the remote immediately to prevent short-circuiting and burning out the key's chip. Instead, disassemble the key to cut off power, dry it with a hairdryer, and then test it. Precautions for using car keys: Do not leave spare keys inside the car, avoid placing them near electronic devices, keep them away from metal objects, avoid dropping the keys, and protect them from high temperatures, moisture, and direct sunlight.
6
5
Share

What are the procedures for license plate registration at a 4S shop?

Bring your ID card, residence permit, vehicle certificate, invoice, pay the vehicle purchase tax, then register and inspect the vehicle at the vehicle management office, and finally choose the vehicle license plate number. The procedures for license plate registration at a 4S shop are as follows: 1. Vehicle certificate: The vehicle certificate is very important. When purchasing a vehicle, be sure to ask the 4S shop whether the vehicle certificate will be delivered with the vehicle or confirm the delivery time to avoid delays in the delivery of the vehicle certificate by the 4S shop, which may delay the license plate registration. 2. Keep the triplicate car purchase invoice: After purchasing the car, the 4S shop will issue a triplicate car purchase invoice, which must be kept as it will be used for license plate registration and other procedures. The invoice has red, yellow, and blue copies, usually the red and yellow copies need to be submitted, and the yellow copy should be kept by yourself. 3. Pay the vehicle purchase tax and obtain the tax certificate: After purchasing the vehicle, go to pay the vehicle purchase tax as soon as possible, usually at the nearest vehicle management office. After successfully paying the vehicle purchase tax, you will receive the tax certificate, remember to keep it safe. 4. Prepare license plate registration documents: Prepare the original ID card and copies in advance. Non-local residents need to provide the original and copies of the temporary residence permit. 5. Register and inspect the vehicle at the vehicle management office: With all the documents ready, you can go to the vehicle management office to register and apply for a license plate. First, a specialized traffic police officer will inspect the vehicle, mainly checking the vehicle identification code, vehicle appearance, vehicle warning triangle plate, etc., so prepare these in advance. 6. Choose the vehicle license plate number: After the vehicle inspection, you can go to the vehicle management office hall to choose the license plate number. 7. Pay the fee and wait for the license plate: After choosing the number, pay the fee and wait for the license plate, which usually takes three to five working days to receive.
5
2
Share

Does Car Wrap Damage Car Paint?

Low-quality car wraps can damage car paint, while high-quality ones do not. Below is relevant information: Invisible car wrap: High-quality invisible car wraps are made of TPU material, which is thermoplastic polyurethane elastomer rubber, causing no harm to car paint and leaving no adhesive residue when removed. When invisible car wraps first appeared, they were made of low-quality plastic film, which could damage car paint. If made of PVC material, removal might leave adhesive residue that is difficult to clean, though they are cheaper. Function: Invisible car wraps have excellent toughness, wear resistance, non-yellowing, easy application, and resistance to collisions and scratches. After installation, they isolate car paint from air, protecting against acid rain, oxidation, and scratches, providing long-lasting paint protection.
10
5
Share

How long before a motorcycle is mandatorily scrapped?

Motorcycles have a mandatory scrapping period of thirteen years. Below is relevant information: Relevant regulations: According to Article 5, Clause 11 of the "Mandatory Scrapping Standards for Motor Vehicles," the scrapping period is 12 years for three-wheeled motorcycles and 13 years for other motorcycles. However, it is important to note that if a lightweight two-wheeled motorcycle has accumulated a mileage exceeding 100,000 kilometers, it will also be scrapped, whichever comes first. Notes: The background for these regulations is to ensure road traffic safety, encourage technological progress, accelerate the construction of a resource-saving and environmentally friendly society, and build a better home.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.