Is the BMW 1 Series available in black?

1 Answers
McArya
07/24/25 11:01am
Sapphire Black is the black color option, which is only available for the imported 1 Series, not the domestically produced models. Automobile body colors: Car color is one of the elements of automobile styling. Car colors include the paint color of the exterior body and the colors of various materials in the interior. When the interior environment of the car and the exterior color of the car harmonize with the surroundings, it provides a pleasant aesthetic experience for passengers and pedestrians. Modification requirements: When modifying the color of a car, there are three colors that are reserved for special vehicles and cannot be used. Red is reserved for firefighting, yellow for engineering rescue, and white over blue for national administrative law enforcement.
Was this review help?
10
4
Share
More Forum Discussions

Does the Baojun 730 have an automatic transmission?

Baojun 730 has an automatic transmission. An automatic transmission means that the driver does not need to manually shift gears, as the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Precautions for shifting gears in an automatic transmission: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after shifting into gear; 3. The vehicle can only be started in P or N gear; 4. To remove the gear lever from P gear, the brake must be pressed; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing the direction of travel, switching between D and R gears must be done after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the internal components of the transmission to overheat and become damaged.
1
4
Share

What are the symptoms of an engine overheating?

The symptoms of an engine overheating include: 1. During hot idle, the air conditioning compressor clutch frequently engages and disengages, or even disconnects, resulting in no cooling from the air conditioning when the engine is hot; 2. When the engine is cold, the air conditioning cools effectively, but when the engine is hot, the cooling effect is not noticeable, and there is a significant resonance hum in the air conditioning system; 3. After the hot engine is turned off, it becomes difficult to start, and automatic stalling may occur while driving with a hot engine; 4. Increased engine noise; 5. When using the air conditioning in high temperatures, the idle becomes unstable with large RPM fluctuations, acceleration is sluggish, and abnormal engine noises may occur. The hazards of engine overheating are: 1. Gradual reduction in the mechanical properties of metal materials, leading to deformation and damage; 2. Normal clearances between components are disrupted due to thermal expansion of parts; 3. Engine oil viscosity decreases and oxidizes, reducing lubrication and accelerating part wear.
9
4
Share

What Are the Reasons for a Dead Car Battery?

Reasons for a dead car battery include: 1. Battery power depletion; 2. Insufficient battery electrolyte; 3. Internal battery failure causing damage. Methods for maintaining a car battery are: 1. Start the car periodically to charge the battery; 2. When electrolyte is low, replenish with distilled water or a specialized replenishing fluid; 3. Regularly check if the small holes on the battery cover are ventilated during daily driving; 4. Inspect the positive and negative terminals for signs of oxidation; 5. Check all parts of the circuit for aging or short circuits; 6. Turn off electrical devices when leaving the car. The functions of a car battery are: 1. Powering the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Providing power to the car's electrical devices when the engine is off or at low idle; 3. Supplying power to electrical devices when the generator's output is insufficient; 4. Mitigating voltage surges in the electrical system to protect the car's electronic devices; 5. Storing excess electricity generated by the alternator.
18
2
Share

Should You Shift to Neutral When Waiting at a Red Light with an Automatic Transmission?

When waiting at a red light with an automatic transmission, it is necessary to shift to neutral. Here are some precautions for shifting gears in an automatic transmission: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after shifting into gear; 3. The vehicle can only be started in P or N gear; 4. To remove the gear lever from P gear, you must step on the brake; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing the direction of travel, switching between D and R gears should only be done after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the temperature of internal transmission components to rise and result in damage.
6
2
Share

How to Set the Locking Sound for the 2021 Levin

The Levin does not have a locking sound; it only flashes the hazard lights after locking. Below is more information about the Levin: Engine Models: The Levin is a compact sedan under Toyota, equipped with two types of engines: a 1.8L naturally aspirated engine and a 1.2L turbocharged engine. Different Configurations: The model with the 1.2L turbocharged engine is the pure gasoline version, while the one with the 1.8L naturally aspirated engine is the hybrid version. Engine Power: The 1.2L turbocharged engine has a maximum power of 85kW and a maximum torque of 185Nm. The 1.8L naturally aspirated engine has a maximum power of 72kW and a maximum torque of 142Nm.
20
4
Share

How to Deal with Spots on Car Chrome Trim?

Methods for dealing with spots on car chrome trim: Hydrochloric Acid: Prepare a soft and clean cloth, then pour a small amount of hydrochloric acid onto the cloth. Gently wipe the areas with spots, repeating the process several times. Although using toothpaste to remove spots may require some patience, this method is relatively safe (other methods may be corrosive). Toothpaste: Toothpaste can be considered a versatile solution because it has abrasive properties. Although using toothpaste to remove spots may require some patience, this method is relatively safe (other methods may be corrosive). Carburetor Cleaner: Carburetor cleaner is used to remove stains and is one of the most effective methods. However, due to its relatively strong corrosive properties, be careful not to let it drip onto the car paint during use, as it may cause varying degrees of damage.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.