···
Log in / Register

Is the Bin Yue a Three-Cylinder or Four-Cylinder?

6Answers
NoahLee
07/29/2025, 04:47:47 PM

The Bin Yue is available in both three-cylinder and four-cylinder versions. It is equipped with two types of engines: a 1.4-liter turbocharged four-cylinder engine and a 1.5-liter turbocharged three-cylinder engine. The 1.4-liter turbocharged four-cylinder engine delivers 141 horsepower and a maximum torque of 235 N·m. This engine features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. The front suspension of the Bin Yue employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The use of a torsion beam rear suspension helps to maximize rear passenger space and trunk capacity. The vehicle's dimensions are 4330mm in length, 1800mm in width, and 1609mm in height, with a wheelbase of 2600mm.

Was this review help?
105
Share
AubreyMarie
08/14/2025, 02:16:55 PM

I often tinker with car engines and have some expertise in this area. The Bin Yue SUV offers different engine options across its various configurations. The initial versions, like the 2019 model with a 1.5T engine, feature a three-cylinder design, which is compact and fuel-efficient, making it quite economical for city driving. However, three-cylinder engines inherently have some vibration issues, but the manufacturer has mitigated this by adding balance shafts and sound insulation pads. Starting with newer models like the 2022 version, Geely began offering four-cylinder engine options, such as the 1.4T, which delivers smoother and more linear power, making it better suited for long-distance driving or those who prefer a quieter ride. Choosing between a three- or four-cylinder engine really depends on your driving needs: three-cylinder engines are simpler and cheaper to maintain, while four-cylinder engines perform better at high speeds. One thing to note is that the engine type also affects insurance costs and resale value, so it's advisable to check the official manual for the specific model before purchasing to avoid making uninformed decisions.

Was this review help?
6
Share
Expand All
DeKatherine
10/16/2025, 02:34:15 AM

I've driven the three-cylinder version of the Binyue myself, and I find it quite adequate for commuting in small cities. The car is equipped with a three-cylinder engine most of the time, with a 1.5L displacement, and the fuel consumption is controlled at around 7-8L, which is quite economical. However, the engine noise is noticeably loud during cold starts in winter, and it takes some getting used to. Geely has also upgraded some models to four-cylinder engines, which offer much smoother power output and reduce frustration during traffic jams. As an ordinary car owner, I suggest test driving and comparing before buying. When testing a three-cylinder car, don't just focus on the specs—listen to the actual engine sound and feel the vibrations. Additionally, maintenance intervals for three-cylinder engines are usually more frequent, requiring a check every 5,000 kilometers to avoid future issues. The engine type also affects tire changes and suspension system compatibility, and these details impact the overall driving experience.

Was this review help?
8
Share
Expand All
DeAlivia
11/29/2025, 02:21:59 AM

Young people often base their car purchases on budget considerations. The Bin Yue commonly features a three-cylinder engine, with the 1.0T version offering an affordable starting price, low fuel consumption, and agile urban performance. Some higher-end models are upgraded to four-cylinder engines for greater stability and durability. When choosing, consider actual usage: three-cylinder engines are suitable for short trips with fuel efficiency, though they may be slightly less smooth, while four-cylinder engines provide higher comfort for long-distance driving but at a slightly higher cost. It is recommended to select the appropriate version based on power needs.

Was this review help?
12
Share
Expand All
Serena
01/19/2026, 03:45:33 AM

Compared to SUVs in the same class, the Bin Yue offers more engine options: the three-cylinder version, comparable to the Haval H2S, is compact and easy to park; the four-cylinder version resembles the CS35 PLUS, providing smooth acceleration and low noise. Having driven various brands, I found the Bin Yue's three-cylinder engine well-optimized, though less relaxing than the four-cylinder on long trips. Additionally, emission standards favor the three-cylinder for resource efficiency, while the four-cylinder caters to driving experience preferences. When purchasing, remember to check the model year differences and road test reports.

Was this review help?
9
Share
Expand All
LiamMarie
04/15/2026, 04:48:52 AM

From a reliability perspective, the three-cylinder engine of the Binyue performs adequately for daily use, but older models may accumulate more carbon deposits and require regular cleaning. The four-cylinder version offers consistent power output with fewer issues, making it more worry-free in the long term. In terms of maintenance, the three-cylinder engine has a shorter oil change interval of about 5,000 kilometers, while the four-cylinder can go up to 7,500 kilometers, reducing costs. For daily driving, it's important to warm up the engine during cold starts to extend its lifespan. Regardless of the number of cylinders, regular inspection of spark plugs is crucial to avoid sudden failures.

Was this review help?
15
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.