Is the battery life of Geometry A several hundred thousand kilometers?

2 Answers
Tami
09/01/25 7:05am
Geometry A battery life is 200,000 to 300,000 kilometers. Introduction to automotive batteries: New energy vehicle batteries generally use ternary lithium batteries, which have the advantages of sufficient power and less pollution. The normal service life of qualified ternary lithium batteries is 8 years, with a specific driving range of 150,000 to 200,000 kilometers. Methods to extend battery life: Maintain steady-speed driving, as aggressive driving can cause certain damage to the battery. Moreover, it is important to develop the good habit of frequently charging electric vehicles. Prolonged battery discharge will significantly reduce its lifespan, so regular charging is key.
Was this review help?
9
2
Share
LeJune
09/14/25 2:54am
As an experienced electric vehicle owner who has driven one for several years, I have some insights into the battery life of the Geometry A. Officially, its battery can last around 300,000 kilometers, using CATL's lithium iron phosphate battery, which is known for its long lifespan and slow degradation. In reality, many users find that after 150,000 kilometers, the battery still retains over 80% of its capacity. The key lies in daily usage: avoid frequent fast charging, opt for slow charging whenever possible, and keep the battery temperature from getting too high—park in the shade during summer to avoid direct sunlight. Additionally, maintaining smooth driving habits is crucial, as rapid acceleration can accelerate battery aging. My own car has clocked 100,000 kilometers so far, with no major battery issues, and it feels quite durable. If the mileage is too high and the battery degradation becomes noticeable, it's time to consider replacing the battery or having it checked by a professional shop. Regular maintenance, such as system diagnostics and balancing charges, can also extend its lifespan. Overall, the battery can last hundreds of thousands of kilometers, but it largely depends on how you use and maintain it.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Is the Wrangler a unibody vehicle?

The Wrangler is not a unibody vehicle. Unibody vehicles lack a separate frame, as the body itself serves as the mounting base for the engine and chassis components, functioning as both the body and frame while bearing all loads. Taking the 2021 Wrangler as an example, its dimensions are: length 4334mm, width 1894mm, height 1839mm, with a wheelbase of 2459mm, minimum ground clearance of 251mm, fuel tank capacity of 70 liters, and a curb weight of 1843kg. The 2021 Wrangler is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 266PS, maximum power of 195.4kW, maximum torque of 400Nm, paired with an 8-speed automatic transmission.
1
3
Share

Where is the PCV valve located on the Baojun 730?

The PCV valve of the Baojun 730 is located inside the crankcase. Here are the specific details: Function of the PCV valve: During the end of the engine's combustion process, some unburned mixture leaks into the crankcase from the piston rings under high pressure. These blow-by gases can escape into the atmosphere, causing pollution. If these gases are not expelled, they can dilute the engine oil in the crankcase, leading to oil degradation and premature wear of engine components. Therefore, a PCV valve is installed on the valve cover to allow these exhaust gases to re-enter the engine through the intake manifold for re-combustion. Working principle of the PCV valve: The PCV valve is controlled by vacuum. When the engine is idling, the intake manifold generates vacuum, which overcomes the spring force to hold the plunger in place, preventing the flow of exhaust gases. At high speeds, the spring force presses the plunger, also preventing the flow of exhaust gases. At medium speeds, the vacuum suction from the engine's intake manifold overcomes half of the spring force, causing the plunger to oscillate within the valve body, allowing the exhaust gases to flow into the intake manifold.
20
2
Share

What are the body dimensions of the BYD F3?

The body dimensions of the BYD F3 are 4533mm, 1705mm, and 1490mm. BYD F3 specifications: The wheelbase is 2600mm; the third-generation F3 has body dimensions of 4617mm, 1716mm, and 1480mm, with a wheelbase of 2615mm, all typical of a compact sedan. The BYD F3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109 hp and a maximum torque of 148Nm. BYD F3 design philosophy: The design philosophy of the F3 draws on the successful experience and the "mm" design concept (which means maximizing the space for passengers while minimizing the space occupied by mechanical components) of Japanese and Korean car development. This concept runs through the entire design of the F3. BYD F3 greatest strengths: High cost-performance ratio; spacious interior; stylish and elegant exterior; high-end models are richly equipped.
3
0
Share

Differences Between Emgrand GL and New Emgrand?

Differences between Emgrand GL and New Emgrand are as follows: 1. Different exterior dimensions 1. Emgrand GL: The vehicle dimensions are 4725×1802×1478mm (L×W×H) with a wheelbase of 2700mm. 2. New Emgrand: The vehicle dimensions are 4631×1789×1470mm (L×W×H) with a wheelbase of 2650mm. 2. Different launch dates 1. Emgrand GL: Officially launched on September 20, 2016. 2. New Emgrand: The Geely New Emgrand Million Edition was officially launched on October 25, 2016. 3. Different performance configurations 1. Emgrand GL: Equipped with 1.3T and 1.8L engines, paired with Getrag 6DCT dual-clutch transmission and Aisin 6-speed manual transmission. 2. New Emgrand: Newly equipped with 1.3T GeTec DVVT turbocharged engine, with a maximum power of 98kw, turbo intervention at 1800 rpm, and peak torque output of 185NM at 2000 rpm.
4
1
Share

How to Use the Cruise Control in the Passat?

The method to use the cruise control in the Passat is: 1. Pull the sliding button on the cruise control lever to the 'on' position; 2. Accelerate or control the speed to maintain the desired speed setting; 3. Press the 'set' button at the top of the lever. Taking the 2020 Passat as an example, it is a mid-size sedan with body dimensions of: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, and curb weight of 1470kg. The 2020 Passat features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
19
3
Share

What is the method for removing a bumper?

The method for removing a bumper is: 1. Remove the bumper cover, clips, screws, and bolts; 2. Pull the bumper in the wheel arch area; 3. Extract the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam located below the rear lights, and its functions are: 1. To protect the rear safety; 2. To absorb and mitigate external impacts; 3. To protect pedestrians' safety; 4. To have decorative purposes; 5. To improve the vehicle's aerodynamics. Rear bumpers are mostly made of highly elastic materials such as plastic or resin, and the bumper consists of an outer panel, cushioning material, and a crossbeam, featuring certain elasticity and energy absorption characteristics.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.