Is the Baojun RM5 an MPV model?

Why does the Mercedes-Benz auto start-stop always show a yellow light?

If the auto start-stop of a Mercedes-Benz always shows a yellow light, it indicates insufficient battery charge, and the battery needs to be recharged. Here are the specific details about the auto start-stop function: 1. Auto Start-Stop Button: The auto start-stop button is located to the left of the cigarette lighter, with an icon of a circle containing the letter 'A' and 'OFF' below. Simply press the button to turn off the auto start-stop. 2. Default Activation: The auto start-stop is activated by default. Every time the vehicle is restarted, the auto start-stop will turn on. This button cannot permanently disable the function; you need to press it each time you start the vehicle to turn off the auto start-stop. 3. Function Purpose: The engine auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light). When it's time to move again, the system automatically restarts the engine. This helps reduce unnecessary fuel consumption, lower emissions, and improve fuel economy.

7

4

Share

What Causes the Friction Sound When a Car Turns?

When a car turns, the squeaking sound from the tires is caused by the friction between the rubber and the ground, which is a normal phenomenon. This occurs because the car's inertia moves it forward while turning, resulting in the sound of resistance between the tires and the ground. Here are some related explanations: Normal Noise: When car tires come into contact with the ground, they produce varying levels of noise due to factors such as the type or unevenness of the road, the car's speed, the type of tires, and the tire's air pressure. Therefore, no matter how perfect a car is, it cannot completely eliminate the noise generated between the tires and the ground during driving. Other Causes of Tire Noise: If the sound is a rattling noise, it may indicate an issue with the CV joint (constant velocity joint), which requires replacement. If the sound is a metallic scraping noise, it could be due to the brake shield rubbing against the brake pad. In this case, you can use a screwdriver to adjust the shield slightly.

14

2

Share

What is the normal tire pressure for Mercedes-Benz in kPa?

According to the requirements and regulations of the international standard GBT2978-2008, the tire pressure for Mercedes-Benz should be between 2.2-2.5 bar. In winter, the tire pressure should be adjusted slightly higher by about 0.2 bar based on the standard tire pressure for the vehicle. In summer, the lower limit of the standard tire pressure is generally sufficient. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can be about 0.1 bar lower than the standard to prevent tire blowouts due to high temperatures. Tire pressure reset is an operation performed on the tire pressure monitoring system after addressing a tire pressure fault, to reset the system. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset.

1

0

Share

Should You Use Fog Lights or Hazard Lights in Heavy Rain?

Whether to use fog lights or hazard lights in rainy weather primarily depends on visibility. When visibility is less than 200 meters, turn on the fog lights along with regular lights; when visibility drops below 100 meters, activate the hazard warning flashers (also known as hazard lights). Function of fog lights: Front fog lights are designed to improve illumination in unclear road conditions ahead, providing a high-intensity scattered light source that penetrates thick fog to alert oncoming drivers. Rear fog lights are installed at the rear of the vehicle to ensure visibility for other road users behind in low-visibility conditions such as fog, snow, or heavy rain, emitting a stronger light than tail lights. Function of hazard warning flashers: Hazard warning flashers serve as signal lights to alert other vehicles and pedestrians that the vehicle is experiencing special circumstances. They should be activated in situations such as vehicle breakdowns on highways, high-speed driving, temporary parking on roads, towing a malfunctioning vehicle, encountering an emergency while driving, being involved in a traffic accident, or when performing special tasks.

11

4

Share

What is the handle in the middle of a Mercedes-Benz?

The lever in the middle of a Mercedes-Benz that resembles a gear shift is the automatic transmission lever. Automatic transmission cars have gears such as R, P, D, N, L, and S. The specific usage methods are as follows: 1. R gear: Used when reversing, also known as the reverse gear. It is important to note that the car must come to a complete stop before engaging the R gear; 2. P gear: Used when parking, which means the engine stops working. Therefore, many people refer to this gear as the parking gear; 3. D gear: Mainly used for driving the car forward, called the drive gear, which is the basic gear for automatic transmission cars; 4. N gear: Similar to the neutral gear in manual transmissions, with no difference in principle. When driving and seeing a red light ahead, the N gear can be used; 5. L gear: A low gear, used when going uphill or overtaking; 6. S gear: The sport mode, which allows free switching among all gears.

18

0

Share

What are the functions of the buttons on the Besturn B50 steering wheel?

Here is a detailed explanation of the button functions on the Besturn B50 steering wheel: 1. The left-side buttons mainly control multimedia functions: mute, volume control, phone answering, audio source selection, track switching, and phone hanging up. 2. The right-side buttons mainly control the cruise system: switching the trip computer information page, up/down selection, confirmation, activating cruise control, resume/increase speed, set/decrease speed, and canceling cruise control. Below is additional information about the Besturn B50: 1. Exterior: The headlights use light guide illumination technology, and the vehicle comes standard with new dual-tone surface brushed 16-inch aluminum alloy wheels. 2. Comfort: The Besturn B50 features optimized vibration and noise control, along with an enhanced audio system configuration, such as the addition of an AUX interface, providing two external audio source playback options (USB and AUX). It is also equipped with a new independent full dot-matrix TN display screen, allowing audio information, air conditioning status, and Bluetooth status to be displayed on the screen.

18

5

Share

Is the Baojun RM5 an MPV model?

Why does the Mercedes-Benz auto start-stop always show a yellow light?

What Causes the Friction Sound When a Car Turns?

What is the normal tire pressure for Mercedes-Benz in kPa?

Should You Use Fog Lights or Hazard Lights in Heavy Rain?

What is the handle in the middle of a Mercedes-Benz?

What are the functions of the buttons on the Besturn B50 steering wheel?

What transmission is used in the Changan Oushang X7?

What are the reasons for insufficient power in the Besturn B50?

What is the function of the secondary air pump in the Besturn B50?

Why is the fuel tank indicator flashing?