Is the Baojun 530 compliant with China 5 or China 6 emission standards?

Where is the outdoor temperature sensor of the Sagitar located?

After removing the left fog lamp grille, you can see the wiring harness extending to the left side of the condenser. 1. Introduction: A temperature sensor (temperature transducer) is a type of sensor that converts temperature variables into standardized output signals for transmission. Temperature sensors can be divided into two major categories based on measurement methods: contact and non-contact types. According to the characteristics of sensor materials and electronic components, they are classified into thermistors and thermocouples. They are widely used in temperature detection, monitoring, display, temperature control, overheating protection, and other fields. 2. Principle: It utilizes the principle of resistance change of a thermistor at different temperatures. As the temperature rises or falls, the resistance of the thermistor increases or decreases, and the ECU captures the voltage change to obtain the outdoor temperature data.

10

1

Share

Why is the lock button of Haval H6 not responding?

The reasons why the Haval H6 lock button does not respond are: 1. Central locking engaged: Generally, vehicles are equipped with a central locking system controlled by the driver. Some high-end vehicles even have an automatic locking function while driving. The central lock mainly prevents passengers from accidentally touching the door handle while the vehicle is in motion, which could lead to danger if the door opens. There is usually an unlocking device next to each door handle, allowing passengers to open the doors from inside even when the central lock is engaged. 2. Child lock engaged: The child lock is usually located near the door latch. When the button is pushed down (activating the child lock), if the door is then closed, it cannot be opened from inside the vehicle and must be opened from outside. This is one of the common methods used by taxis to lock the left rear door. Pushing the child lock button back to the off position allows the door to be opened from inside.

16

3

Share

What is the yield strength of Q235 steel?

Q235 has a yield strength of 235MPa. Q235 ordinary carbon structural steel is also called A3 plate. Ordinary carbon structural steel - ordinary plate is a type of steel material. The Q represents the yield limit of this material, and the following 235 refers to the yield value of this material, which is around 235MPa. The yield value decreases as the thickness of the material increases (plate thickness/diameter ≤16mm, yield strength is 235MPa). Below are the usage introductions: 1. Widely used in construction and engineering structures: used to make steel bars or construct factory building frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc. It is also widely used as mechanical parts with relatively low performance requirements. C and D grade steel can also be used for certain professional steel applications. 2. Used for various mold handles and other non-critical mold parts.

19

4

Share

Is the deduction in Subject 2 for each item or overall?

The deduction in Subject 2 is for each item. Here are the relevant details: 1. Examination standard: Each item is scored out of 100, and a score of 80 or above is required to pass. Passing all five items with scores above 80 means passing Subject 2. The full score for Subject 2 is 100. For large buses, tractors, city buses, medium buses, and large trucks as the permitted vehicle types, a score of 90 or above is required to pass. For other permitted vehicle types, a score of 80 or above is required. 2. Examination items: The test includes parallel parking, stopping and starting on a slope, right-angle turns, S-curve driving, and reversing into a garage. The full score is 100, and the passing standard is 80. Each Subject 2 examination has two attempts. The evaluation criteria include items marked as fail, deducting 20 points, deducting 10 points, and deducting 5 points.

18

3

Share

Is there a warning if the fuel tank cap is not tightened properly?

The fuel tank cap does not have a warning if it is not tightened properly, so extra caution is required. The malfunction indicator light will not illuminate due to an improperly tightened fuel tank cap; it only lights up in case of internal engine faults. When the car engine is not functioning correctly and the self-diagnostic system does not output any fault codes, it is particularly necessary to rely on the operator's inspection and judgment to determine the nature and location of the fault. An unclosed fuel tank cap can lead to the following potential dangers: 1. Fire hazard: If the fuel tank cap is left open, any external sparks falling into the tank could easily cause a fire. 2. Engine water ingress: Forgetting to close the fuel tank cap during rain or snow can allow water to enter the tank, leading to engine water damage. 3. Attracting fuel thieves: This is a common occurrence, where car owners forget to close the fuel tank cap after refueling and wake up to find half of their fuel stolen after parking overnight in residential areas.

20

2

Share

What are the reasons for the Sorento's high fuel consumption?

Abnormal fuel consumption can be caused by aging spark plugs, carbon buildup in the throttle, or insufficient tire pressure. 1. Reasons: In most cases, it is due to the owner overfilling the fuel tank, causing excess gasoline that is not burned in the form of vapor. Normally, each vehicle is equipped with an activated charcoal canister on the right side of the engine compartment, which is specifically designed to absorb fuel vapors. When starting the engine, the activated charcoal canister absorbs some of the fuel vapors, but excess gasoline cannot evaporate through the activated charcoal canister and may flow out through the air pipe. 2. Reducing fuel consumption: Apart from road conditions, driving habits also play a role in reducing fuel consumption. Avoid prolonged idling to warm up the car, avoid sudden acceleration, avoid unnecessary lane changes and overtaking, make good driving judgments, and avoid sudden braking.

6

2

Share

Is the Baojun 530 compliant with China 5 or China 6 emission standards?

Where is the outdoor temperature sensor of the Sagitar located?

Why is the lock button of Haval H6 not responding?

What is the yield strength of Q235 steel?

Is the deduction in Subject 2 for each item or overall?

Is there a warning if the fuel tank cap is not tightened properly?

What are the reasons for the Sorento's high fuel consumption?

How to Start an Automatic Car?

Can You Handle Driving for 9 Hours?

Is the Peugeot 508L Suspension a Magic Carpet?

Does Subaru Have Station Wagons in China?