Is the B2 Driver's License Easy to Obtain?

1 Answers
EverlyDella
07/29/25 8:25pm
B2 driver's license is relatively easy to obtain. Here are the relevant details: Subject 2: There are a total of 16 mandatory test items, including reverse parking and garage shifting, parallel parking, hill start, single-plank bridge, curve driving, right-angle turn, passing continuous obstacles, passing narrow gates, passing bumpy roads, narrow road U-turns, simulating continuous sharp turns on mountain roads, simulating rainy and foggy weather conditions, simulating slippery roads, simulating tunnel driving, simulating highway driving, and simulating emergency handling. B2 Driver's License: This is the license for large trucks. Holders of a B2 license can drive heavy-duty trucks and medium-duty trucks. The so-called heavy-duty truck refers to a truck with a length of 6 meters or more and a total mass of 12,000 kg or more.
Was this review help?
2
0
Share
More Forum Discussions

How to solve the problem of driver's door contact switch failure?

Solution for driver's door contact switch failure: First, try disconnecting and reconnecting the battery cable. If that doesn't work, you'll need to replace the door contact switch to resolve the issue. The door contact switch is a type of switch that controls electrical appliances based on the door's opening and closing. When the door is open, the switch is open; when closed, it's closed. It mainly controls the interior light, hazard warning lights, and the central locking system for sliding doors. The door contact switch in a car is generally installed in the door gap area, pressed when the door is closed and released when opened. Its function is to detect the door's open/closed status and provide status signals to the vehicle's control circuit. It can be used to control features such as the reading light, dashboard door status display, and door open warning light.
19
5
Share

What does 180turbo mean?

180turbo is the designation for Honda's turbocharged models, where 180 represents the maximum torque of 180Nm. Generally, 180turbo refers to Honda's 1.0T engine models. The main function of a turbocharger is to increase the air intake of the engine, thereby enhancing the engine's power and torque. This means that the engine can output greater power after being turbocharged, which can also enhance the driving experience to some extent. When using a turbocharger, it's important to pay attention to proper usage and maintenance, as it is ultimately a mechanical device that can be prone to damage in long-term high-temperature and high-speed environments.
17
5
Share

How to Check the Production Year of Goodyear Tires?

Goodyear tires indicate the production year as follows: On the sidewall of the tire, within a small square, the production date of the tire is marked with a four-digit number. The last two digits represent the year, and the first two digits represent the week number. For example, 3513 indicates that the tire was produced in the 35th week of 2013, approximately in September 2013. Goodyear Tire & Rubber Company is headquartered in Akron, Ohio, USA. The company primarily manufactures tires, engineered rubber products, and chemical products. Automobile tires can be divided into pneumatic tires and solid tires based on the structure of the tire body, with the vast majority of modern vehicles using pneumatic tires. According to the air pressure inside the tire, pneumatic tires can be categorized into high-pressure tires, low-pressure tires, and ultra-low-pressure tires.
18
2
Share

What Are the Detection Methods for the Camshaft Position Sensor?

Camshaft position sensor detection methods: Detection of sensor power supply voltage: Turn off the ignition switch, unplug the sensor wire connector, and connect the positive and negative probes of the multimeter to terminals 1 and 3 respectively. When the ignition switch is turned on, the voltage should be above 4.5V. If the voltage is zero, it indicates a break or short circuit in the wiring harness. After turning off the ignition switch, continue to check for any breaks or short circuits in the wiring. The main function of the camshaft position sensor is to detect the position and rotation angle of the camshaft, determining the position of the top dead center in the compression stroke of cylinder 1. During startup, the engine ECU uses the signals provided by the camshaft position sensor and the crankshaft position sensor to identify the position and stroke of the piston in the cylinder, controlling the fuel injection sequence and ignition sequence for precise fuel injection and ignition control.
20
4
Share

Where is the battery located in the Mercedes-Benz S500?

Mercedes-Benz S500 battery location: In older versions, it is located under the protective cover on the right side under the hood. The newer versions use a polymer battery, positioned at the upper left corner of the hood. The Mercedes-Benz S500 is a sedan, and its hybrid drive system consists of a gasoline engine and a high-torque electric motor, operating economically to minimize environmental impact. The body dimensions of the Mercedes-Benz S500 are 5159mm in length, 1854mm in width, and 1453mm in height, with a wheelbase of 3086mm. It has a maximum power of 225kw and a maximum torque of 460nm.
14
1
Share

What Causes the ABS Yellow Light to Illuminate in Trucks?

ABS light can illuminate in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt off the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wires or poor contact in the ABS relay can lead to signal issues, causing system failure. Solution: Check wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases, the voltage rises, and the ABS indicator turns off. This can also occur if the ABS system's power supply voltage is too low due to poor wire contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body wire connector; ABS computer malfunction. Solution: Loosen and retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete self-setting; replace the brake light switch. If the ABS warning light is on, it is advised not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's path, posing significant safety risks.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.