Is the Axela equipped with an AT transmission?

1 Answers
CaydenRose
07/29/25 6:37pm
The Axela is equipped with an AT transmission. The Axela comes with a 6AT transmission, while older models also featured a 6-speed manual transmission. An AT transmission is an automatic shifting device that emerged in contrast to manual transmissions, capable of automatically shifting gears based on the vehicle's speed and engine RPM. The AT transmission offers smoother shifting compared to dual-clutch transmissions and boasts better reliability and durability. Transmission maintenance methods: Regularly inspect the transmission: It is essential to regularly check the fluid level in the transmission to ensure it remains within the specified range. Refill as needed based on actual working conditions, ensuring that the new fluid added is of the same type. When changing the fluid, take advantage of the transmission's operation to promptly drain the old fluid and clean the system. Regularly inspect the working condition of the transmission gears to ensure optimal meshing between gears, and clean them promptly to maintain proper alignment between gears and shafts. Regularly inspect the condition of various connection points in the transmission: During routine maintenance, check the condition of all connection points in the transmission to promptly identify any issues such as looseness, wear, or damage. Tighten any loose connections immediately and repair or replace damaged parts promptly. Regularly inspect the oil seals at the shaft ends and external joints for any signs of oil leakage or seepage, and replace any failed seals or gaskets promptly.
Was this review help?
17
5
Share
More Forum Discussions

How to Start with One-Button Ignition in Winter?

Winter one-button ignition method is as follows: 1. The driver sits in the cockpit and presses the start button for the car to perform self-check; 2. Step on the brake and press the one-button ignition button to start the engine; 3. Step on the foot brake, shift to D gear, and release the handbrake to start. The one-button ignition device is part of a smart car, a button device that simplifies the starting process and can also turn off the engine. The functions of one-button ignition include: 1. Multiple start modes; 2. Stable and reliable performance; 3. Intelligent entry with sensing; 4. Free switching between dual modes with smart key; 5. Smart card spare key; 6. Intelligent silent car wash mode.
17
4
Share

What are the effects of a faulty brake light switch in a car?

The effects of a faulty brake light switch in a car are: 1. The brake lights remain on continuously; 2. The cruise control fails to function properly; 3. The battery may drain after parking; 4. For automatic transmissions, the brake indicator light does not illuminate and no sound is heard when pressing the brake; 5. The cruise control frequently fails to shift gears automatically when activated. The brake light is installed at the rear of the vehicle and is primarily red in color. Its purpose is to enhance the penetration of light, allowing following vehicles to detect the vehicle ahead under low visibility conditions and preventing rear-end collisions. The method for replacing the brake light is: 1. Use a Phillips screwdriver or socket to remove the bolts; 2. Pull the light assembly out from the rear pillar; 3. Rotate the socket counterclockwise and remove it; 4. Remove the old bulb and insert the new one.
18
4
Share

What are the dimensions of the Nissan Sylphy?

The Nissan Sylphy measures 4631mm in length, 1760mm in width, and 1503mm in height. Taking the 2021 Nissan Sylphy as an example, it is a compact car with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a curb weight of 1188kg. The 2021 Nissan Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension, with a front-wheel drive layout. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122ps, a maximum power of 90kw, and a maximum torque of 155nm, paired with a 5-speed manual transmission.
1
4
Share

How to adjust the mirrors on the Roewe i5?

The method to adjust the mirrors on the Roewe i5 is: 1. Toggle the left/right adjustment switch to select the exterior mirror you wish to adjust; 2. Press the directional adjustment switch and observe the angle of the selected exterior mirror, adjusting it to the desired position; 3. After completing the adjustment, return the left/right selection switch to its initial position (middle position). Taking the 2020 Roewe i5 as an example, it is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission. The 2020 Roewe i5 is a compact car with body dimensions of: length 4601 mm, width 1818 mm, height 1489 mm, a wheelbase of 2680 mm, a fuel tank capacity of 45 liters, a trunk capacity of 512 liters, and a curb weight of 1270 kg.
5
4
Share

How Often Should the Car Air Conditioning Filter Be Replaced?

It is recommended to replace the car air conditioning filter once a year. The functions of the air conditioning filter are: 1. Provide fresh air inside the car; 2. Absorb moisture and harmful substances in the air; 3. Maintain clean air to prevent bacterial growth, ensuring safety and hygiene; 4. Filter solid particles in the air. The replacement method for the air conditioning filter is: 1. Remove the damping rods on both sides of the glove box; 2. Take off the glove box to see a black rectangular cover, pry it open, and remove the clips; 3. Take out the old air conditioning filter; 4. Install the new air conditioning filter. The functions of the car air conditioning system are: 1. Filter the air entering the cabin; 2. Absorb moisture in the air; 3. Maintain clean air to prevent bacterial growth; 4. Prevent window fogging; 5. Adjust the cabin temperature.
14
5
Share

Where to Add Windshield Washer Fluid in a Car?

Under the car's hood, the small blue cap is where you add windshield washer fluid. The method to add windshield washer fluid is as follows: 1. Turn on the wiper switch, and the windshield washer fluid will spray out from below the front windshield; 2. Continue until the spray nozzles stop spraying, then open the windshield washer fluid filler cap and add a small amount of washer fluid; 3. Turn on the wiper switch again to clear out the remaining washer fluid; 4. When the spray nozzles no longer spray fluid the second time, add 4 liters of windshield washer fluid, then securely close the filler cap. The functions of windshield washer fluid are: 1. To clean debris off the windshield; 2. To lower the freezing point of the liquid; 3. To ensure the windshield is clear and transparent, providing a clear view; 4. To eliminate static charges on the glass surface; 5. To reduce friction between the wipers and the glass, preventing scratches.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.