Is the Auto Start-Stop Function Practical?

1 Answers
DeFernando
07/29/25 9:26pm
Auto start-stop function is useful. It can reduce unnecessary fuel consumption, lower emissions, and improve fuel economy. Here are some precautions when using the auto start-stop function: 1. Turn it off in traffic jams: Repeated start-stop not only increases fuel consumption but also adds burden to the engine. 2. Turn it off on slopes: Although the auto start-stop duration is very brief, engine start-stop on slopes may lead to insufficient brake assistance. 3. Turn it off when using air conditioning: Since the air conditioning requires significant power consumption, and the vehicle's electrical system may not provide enough power to run the air conditioning when the engine is off, passengers may feel uncomfortable. 4. Turn it off when wading: When a vehicle is wading, the speed is relatively low. If the brake is pressed at this time, the auto start-stop will engage, and the engine will stop working. This creates negative pressure in the exhaust pipe, which may cause water to flow into the exhaust system. Restarting the engine under such conditions can severely damage it.
Was this review help?
11
1
Share
More Forum Discussions

What is the method for replacing the battery in a Sagitar key?

The method for replacing the battery in a Sagitar key is as follows: 1. Open the folding part of the key and insert a flat-head screwdriver into the small horizontal groove in the slot; 2. After prying open a larger gap, pull the key ring with your hand to separate the key; 3. Open the side to expose the battery part and the circuit board part; 4. Remove the old battery and replace it with a new one. Taking the 2021 Sagitar as an example, it belongs to the compact car category, with body dimensions of: length 4753mm, width 1800mm, height 1462mm, a wheelbase of 2731mm, a fuel tank capacity of 50l, and a curb weight of 1355kg. The 2021 Sagitar is equipped with a 1.2l turbocharged engine, with a maximum horsepower of 112ps, a maximum power of 85kw, a maximum torque of 175nm, and is paired with a 5-speed manual transmission.
14
0
Share

What is the Difference Between Patch Repair and Mushroom Nail Repair for Tires?

The differences between patch repair and mushroom nail repair are as follows: 1. Different Repair Times: The glue strip method in ordinary tire repair is the fastest and most convenient, taking only a few minutes, and it does not require removing the tire from the rim. In contrast, the mushroom nail repair process is more time-consuming, usually taking about half an hour, and requires removing the tire from the rim. 2. Different Costs: The price of mushroom nail repair is higher than that of ordinary tire repair, which typically costs around 20-30 yuan. Mushroom nail repair usually costs around a hundred yuan or even more. 3. Different Limitations: Patch repair is the most common tire repair method on the market due to its high cost-effectiveness, making it the preferred choice for tire repairs.
8
5
Share

How to Identify a New Car?

The methods to identify a new car are as follows: 1. Check the vehicle's mileage: A two-digit number is considered normal. 2. Inspect the vehicle's production date: Check the production dates of all four tires; examine the production dates of all windows; verify the production date on the vehicle's nameplate. 3. Thoroughly inspect the vehicle: Look for any wear on the seats; check for scratches on both the interior and exterior parts. The significance of a new motor vehicle: It refers to a vehicle that has no previous owner, has not been registered, has no license plates, and lacks any documentation of prior procedures. Once a vehicle is registered or has a registration certificate, it is no longer considered new. Additionally, mileage can be a distinguishing factor, as new cars typically have no mileage recorded.
4
5
Share

What is the fuel consumption of the Geely Icon?

The fuel consumption of the Geely Icon is 7.5L/100km. Below is a relevant introduction to the Geely Icon: 1. Brand: The Geely Icon is a compact SUV under the Geely brand. The Geely ICON is the second SUV based on the BMA modular architecture, achieving up to 90% restoration of the concept CONCEPT ICON, with the transition from concept to mass production taking less than a year. 2. Design: The overall body design is simple and clean. The front face inherits Geely's signature water ripple grille but appears more avant-garde compared to the family-style front face. The design of the front and rear lights resembles an hourglass, and the interior design also features a futuristic style.
4
1
Share

How to adjust the valve tappets on a Ford Focus?

The Ford Focus uses hydraulic valve lifters, which generally have few issues. Here are specific details about the Ford Focus: 1. Powertrain: The 1.5L engine is paired with either a 6MT or 6AT transmission, while the 1.5T model comes with an 8AT transmission. 2. Interior: The design follows the current model, with upgrades to the configurations of some variants. Specifically, the interior features an all-black color scheme, accented with chrome details. The floating central touchscreen, paired with a three-spoke multifunction steering wheel, creates a highly stylish visual effect. 3. Features: The EcoBoost180 Trend variant adds keyless entry, one-touch start, TPMS tire pressure monitoring, among others. The entry-level 1.5L Auto Trend variant now includes a large sunroof, one-touch start, TPMS tire pressure monitoring, parking sensors, and a leather-wrapped steering wheel.
1
2
Share

Is Warm-up Necessary in Summer?

Warm-up is necessary in summer because after prolonged parking, the engine oil flows back to the lower oil pan of the engine. Therefore, upon ignition, the upper part of the engine is in a state without oil and lacks lubrication. It takes about 30 seconds after starting for the oil pump to circulate the oil to the parts that need lubrication the most, such as pistons, connecting rods, and crankshafts. Pay attention to the following points during warm-up: 1. Avoid stomping on the accelerator during idle: It is best to drive smoothly at around 40 km/h for the first 2-4 kilometers. Otherwise, it will cause rapid wear and tear on the engine, severely damaging its components. 2. The coolant temperature should reach normal operating levels: When exiting an underground garage, you usually have to climb a steep slope. If the engine hasn't reached its normal operating temperature, forcing it will only result in greater wear and tear on the vehicle.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.