Is the Audi Q7 a 5-seater or 7-seater?

2 Answers
OHaven
07/29/25 9:44am
The Audi Q7 is exclusively available as a 7-seater model across all variants. The Q7 is a mid-to-large luxury SUV under the Audi brand, with dimensions of 5067mm in length, 1970mm in width, 1731mm in height, and a wheelbase of 2996mm. The Audi Q7 is equipped with two engine options: a 2.0-liter turbocharged engine and a 3.0-liter turbocharged engine. Relevant information about automotive engines is as follows: 1. Introduction: An automotive engine is the power-generating device for vehicles, serving as the heart that determines a car's power performance, fuel efficiency, stability, and environmental friendliness. Common gasoline and diesel engines both belong to reciprocating piston-type internal combustion engines. 2. Classification: Based on different power sources, automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid powertrains, among others.
Was this review help?
4
2
Share
Ellen
08/12/25 11:18am
When I first got my Audi Q7, I was also curious whether it was a five-seater or seven-seater. It turns out there are multiple configurations available. My model is the base version with five seats, which is quite comfortable for daily commuting—spacious and not cramped. If you need to carry more people, you can opt for the third-row seats to make it a seven-seater, like my friend did. He said it’s great for family trips, though the legroom is a bit tight. I’ve also tried the seven-seater version—the third row is flexible to fold, but adults might feel tired after sitting there for long, making it more suitable for kids or short trips. I think the choice depends on your needs: the five-seater offers more spacious and practical space, while the seven-seater is handy for occasional use but reduces trunk space. Audi is quite flexible in this regard—it’s best to visit a dealership and test the actual car to be sure, since configurations may vary by model year and region. Don’t just rely on ads.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

How to Repair Oil Leakage in Diesel Engine Air Pump?

It cannot be repaired, only a new air pump can be replaced. The following are precautions for diesel engine air pumps: 1. Seasonal maintenance: The maintenance of diesel engine air pumps should be carried out according to the season and temperature. When the temperature is too low in winter, it is necessary to add antifreeze to the cooling system; when the temperature remains low for a long time, kerosene can be added to the diesel. 2. Lubrication of the diesel engine: The diesel engine requires its first oil change after 40 hours of initial operation, and the oil change cycle is determined based on its usage and oil quality. If the diesel pump has been idle for too long, it should be replaced before use.
10
2
Share

What are the body dimensions of the Mercedes-Benz GLE?

The length, width, and height of the Mercedes-Benz GLE are 4941 mm, 2018 mm, and 1782 mm respectively, with a wheelbase of 2995 mm. The Mercedes-Benz GLE is a mid-to-large luxury SUV, so the interior space of this vehicle is relatively spacious. Engine: The Mercedes-Benz GLE uses two engines in total, one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. Both engines are paired with a 9-speed automatic transmission (9AT). The 9AT transmission offers excellent shift smoothness, and this type of transmission also boasts good reliability and durability. Suspension: The front suspension of the Mercedes-Benz GLE uses a double-wishbone independent suspension, while the rear suspension employs a multi-link independent suspension. The Mercedes-Benz GLE is equipped with a full-time four-wheel-drive system and uses a multi-plate clutch-type central differential.
17
3
Share

How do temporary traffic lights capture violations?

Temporary traffic lights cannot capture violations. Temporary traffic lights are used when the original traffic lights are malfunctioning or temporarily unavailable for other reasons, and a temporary one is placed at the corresponding location. Below is relevant information about violation capture: 1. Pressure sensing: Electronic eyes use induction lines to sense the pressure from vehicles on the road, collecting signals through sensors and sending them to the central processor for temporary storage in registers. 2. Pulse signals: If two pulse signals are generated within the same time interval (during the red light cycle), they are considered "valid." 3. Preventing false captures: When the yellow light is on, the capture system delays activation by 2 seconds; when the red light is on, the system is already active; the system shuts down 2 seconds before the green light turns on, mainly to prevent false captures.
15
2
Share

How to Calculate Gear Tooth Width?

Gear tooth width is usually expressed by the tooth width coefficient. The coefficient for helical gears is 0.4, for herringbone gears it ranges from 0.5 to 1.0, for straight bevel gears the tooth width = gear coefficient * outer cone distance; for worm gears, the tooth width = 0.65 * worm pitch diameter. Generally, the larger the tooth width coefficient, the wider the gear, and the greater the load-bearing capacity of the gear, but the uneven distribution of load along the tooth direction also increases. Below is relevant information about gears: 1. Classification: Gears can be classified by tooth profile, gear shape, tooth line shape, the surface where the teeth are located, and manufacturing method. The tooth profile of a gear includes the tooth curve, pressure angle, tooth height, and modification angle. 2. Tooth Width: Tooth width refers to the axial length of the gear tooth's entity, i.e., the 'thickness' of the gear.
1
4
Share

What are the differences between Land Cruiser EXR, GXR, and VXR?

Here are the differences between Land Cruiser GXR and VXR: 1. Engine: The Toyota Land Cruiser VXR is equipped with a 202kW (4.0L naturally aspirated) engine; the Toyota Land Cruiser GXR is equipped with a 228kW (4.6L naturally aspirated) engine. 2. Curb weight: The Toyota Land Cruiser VXR has a curb weight of 2635kg; the Toyota Land Cruiser GXR has a curb weight of 2735kg. 3. Maximum torque: The Toyota Land Cruiser VXR has a maximum torque of 385/4400Nm/rpm; the Toyota Land Cruiser GXR has a maximum torque of 453/3400Nm/rpm.
13
0
Share

How soon should the first maintenance be done for a new Lavida Plus?

The first maintenance should be done within 5,000 kilometers or 1 year, whichever comes first. The maintenance manual for the Lavida Plus specifies the mileage and time for maintenance, which owners can refer to. Timely replacements: The brake fluid for the Lavida Plus should be replaced every 24 months or 50,000 kilometers; the manual transmission should be inspected every 60,000 kilometers and replaced if necessary, while the automatic transmission should be replaced every 60,000 kilometers; the power steering fluid does not have a specified replacement interval; the timing chain is generally maintenance-free. First maintenance for a new car: The first maintenance for a new car typically involves a simple oil and oil filter change, followed by a comprehensive vehicle inspection. Normally, there are no other items that need replacement. In addition to changing the engine oil and oil filter, it is necessary to check whether the generator belt and wiper blades are damaged, inspect the levels of various fluids to ensure they are normal, check the tire pressure for normal levels, and look for any signs of uneven wear, bulging, or damage on the tires. The vehicle's undercarriage should also be inspected, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches. Additionally, all switches and lights in the vehicle should be checked to ensure they are functioning properly.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.