Is the Audi Q5L a domestically produced vehicle?

1 Answers
MartinFitz
07/30/25 6:16am
Audi Q5L is a domestically produced vehicle, manufactured by FAW-Volkswagen Audi. Below is relevant information about the Audi Q5L: 1. Body dimensions: The Audi Q5L measures 4765 mm in length, 1893 mm in width, 1659 mm in height, with a wheelbase of 2908 mm. 2. Powertrain: It is equipped with two engines, one being a low-power version 2.0-liter turbocharged engine, and the other a high-power version 2.0-liter turbocharged engine. The low-power version 2.0-liter turbocharged engine has a maximum power of 140 kW and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The high-power version 2.0-liter turbocharged engine delivers a maximum power of 185 kW and a maximum torque of 370 Nm, also matched with a 7-speed dual-clutch transmission.
Was this review help?
3
0
Share
More Forum Discussions

What to do if 12 points are deducted from a Class C driver's license?

Points can be cleared through study and examination. The specific process is as follows: 1. License suspension: You need to go to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the driver's illegal act occurred to receive 7 days (8 class hours per day) of road traffic safety law study. The total class hours generally need to be completed within 15 days. 2. Take the subject one exam: After passing the exam (90 points), the points will be cleared and the driver's license will be returned. For those who fail the exam, they need to reschedule and retake the exam until they pass. 3. Within one scoring cycle: If the points deducted exceed 12 but are less than 24, only the subject one exam is required; if the points deducted reach 24, in addition to the subject one exam, you also need to pass the subject three exam to retrieve your driver's license.
16
2
Share

How to Change the Location of a Driver's License?

You need to go to the local vehicle management office to complete the driver's license transfer procedure. Here is some relevant information about driver's licenses: 1. Introduction to Driver's License: The full name of a driver's license is the motor vehicle driver's license, also known as a "driver's license." It is a certificate required by law for individuals who drive motor vehicles. 2. Definition of Driver's License: A motor vehicle driver's license is a legal document issued by the management authorities after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations and driving skills, and passed the relevant tests, permitting them to drive a certain type of motor vehicle. 3. Age Requirements for Driver's License Application: To apply for a license to drive small cars, small automatic transmission cars, or light motorcycles, the applicant must be at least 18 years old and under 70 years old.
12
1
Share

Is It Normal for Car Wheels to Rust?

Rust on car wheel hubs is not normal. The wheel hub is the central part of the wheel where the axle is installed, also referred to as the "rim" or "steel rim." Wheel hubs are prone to accumulating dirt, and if not cleaned for a long time, they can corrode and deform, leading to potential safety hazards. Methods to Remove Rust from Car Wheel Hubs: If the rust on the wheel hub is not severe, you can first use very fine water sandpaper dipped in water to gently sand away the rust spots. After completely wiping it clean, apply a layer of primer to ensure the rust does not spread or worsen. For new scratches, wipe them clean and directly apply primer. Most vehicles come with a small can of original paint. Methods to Prevent Rust on Car Wheel Hubs: Paint surfaces often rust due to frequent collisions and scratches. Additionally, small stones kicked up by tires while driving can chip the paint, leading to small rust spots over time. These minor damages are easily overlooked because they are often not very noticeable. Therefore, it is important to regularly maintain the body, hood, and outer areas of the car. If any rust is found, it should be addressed immediately by a professional auto detailing shop. While driving, it is inevitable to encounter rainy or snowy weather or pass through muddy and stagnant roads. Sludge can accumulate in small gaps under the car and on the floor. Hence, it is necessary to frequently check the inner and outer edges of the wheel hubs, the bottom corners of doors and the trunk, the keyholes of doors, and the moving parts of the wiper frame. Additionally, ensure that the drainage holes in doors and other parts of the body remain unobstructed. Monitor the humidity of interior coverings, such as carpets, to prevent rust in floor areas.
16
5
Share

What Kind of Car is Considered a Stock Car?

Normally, cars that have been in stock for more than six months are referred to as stock cars. Here is an introduction to stock cars: 1. Imported Stock Cars: Parallel imported cars take up to 3 months to arrive at the port from the time they leave the factory abroad, depending on the location of the foreign factory, such as the USA, Canada, Europe, or the Middle East. However, delays in customs clearance at the port can prolong this period. Therefore, imported models that have been manufactured more than 6 months ago are considered stock cars. 2. How to Identify a Stock Car: The manufacturing date marked on the nameplate in the engine compartment indicates the actual time the car has been in stock. Imported cars that have been in stock for more than 6 months can be classified as stock cars. Additionally, if there are obvious signs of aging on parts such as the wipers, engine belts, or tires of an imported car, it can also be considered a stock car. Finally, you can check the battery by trying to turn on high-power-consuming devices like the high beams for about 10 minutes with the engine off. If the battery cannot sustain this, it is likely a stock car.
18
4
Share

What Does the Exclamation Mark on the Car Dashboard Mean?

There are five situations when an exclamation mark appears on the car dashboard, namely general fault, automatic transmission fault, brake system fault, abnormal tire pressure, and lighting fault. The following is a detailed analysis of the five situations: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the general performance or components and functions of the car. Mainly includes parking sensor failure, fuel cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to find out the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricating oil is below the normal range. The transmission oil needs to be replaced in time. Brake System Fault: An exclamation mark in the middle of a circle with brackets. This represents the warning of the brake system, mainly including brake system failure and low brake fluid level. The brake system needs to be inspected immediately to avoid accidents. Abnormal Tire Pressure: An exclamation mark in the middle of a horizontal line below brackets. This represents the tire pressure monitoring warning light. When the tire pressure of the car is too low, this warning light will light up. It is necessary to check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating that there is a fault in the car lights. Solution: Go to a 4S shop for inspection and treatment as soon as possible, or you can check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to see where the problem is.
3
4
Share

What is a runaway truck ramp?

A runaway truck ramp is typically set up on long downhill sections of highways to prevent vehicles from losing control, consisting of a steep slope. Below is relevant information about runaway truck ramps: 1. Entrance and exit ramps: These are auxiliary connecting sections for entering and exiting the main roadway, which can be "at-grade ramps" or "interchange ramps." They are major traffic infrastructure components of road interchanges. 2. On-ramps and off-ramps: These are auxiliary inclined connecting sections for ascending or descending elevated roads, usually "interchange ramps." Note: Both of the above (items 1 and 2) often incorporate the design of collector-distributor roads. 3. Direct ramp: Positions the right-turn lane on the right side. 4. Indirect ramp: Positions the left-turn lane on the right side, using a loop to connect to other highways. 5. Semi-direct ramp: Similar to an indirect ramp but without a loop, instead using a longer and more undulating elevated road as the connecting ramp.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.