Is the Audi Q5 equipped with full-time four-wheel drive or on-demand four-wheel drive?

1 Answers
DaniellaLee
07/28/25 11:07pm
The Audi Q5 features a full-time four-wheel drive system. It is powered by a 2.0-liter turbocharged engine with a maximum power output of 169 kW and a peak torque of 350 Nm. The engine reaches its maximum power between 4,300 to 6,000 rpm and delivers peak torque from 1,500 to 4,200 rpm. This engine incorporates AVS (Audi Valvelift System) variable valve lift technology and utilizes a combined direct and port fuel injection system. It features an aluminum cylinder head and a cast iron cylinder block, paired with an 8-speed automatic transmission. The Audi Q5's front suspension employs a five-link independent setup, while the rear suspension uses a trapezoidal-link independent configuration. Additionally, it is equipped with a Torsen center differential.
Was this review help?
17
0
Share
More Forum Discussions

What is the reason for frequent water under the floor mat of the Besturn B50?

The reason for frequent water under the floor mat of the Besturn B50 may be due to car air conditioning water leakage. Below is a detailed introduction about the Besturn B50: 1. Overview: The Besturn B50 is a car independently developed by FAW and was launched on May 16, 2009. It has excellent performance in many aspects such as handling, quality, and space, and is equipped with Michelin Energy Saver series tires, which provide good noise reduction effects. 2. Others: The wheelbase is 2675mm. The vehicle dimensions are 4615*1785*1435mm. The trunk volume is 450 liters. The fuel tank capacity is 58 liters. The standard seating capacity is 5. The vehicle weight is 1325kg, 1365kg, or 1395kg. The maximum power is 102/6500. The maximum torque is 172/4000.
9
3
Share

Why is the car speedometer inaccurate?

The reasons for inaccurate car speedometer readings are as follows: 1. Internal sensor failure: The odometer sensor malfunctions. 2. Excessive coil distance: If the sensor is too far from the induction coil (gear ring) inside the transmission, it may also cause speedometer inaccuracies. 3. On-board computer malfunction: The vehicle's computer system requires adjustment. Relevant information about speedometers includes: 1. Speedometer: An electronic device installed on bicycles to record and display various cycling data such as current speed, riding distance, riding time, etc. High-end speedometers also feature altitude, air pressure, and gradient displays. 2. Working principle: When the wheel rim rotates, the sensor captures information from the induction magnet and transmits it to the speedometer via the sensor wire. The main speedometer unit processes this data to calculate speed, distance, and other information.
13
4
Share

What Causes an Electronic Steering Lock Failure in Cars?

Car electronic steering lock failures can occur due to the following reasons: 1. Reason one: Forcibly turning the steering wheel after locking the car, causing the computer to make an erroneous judgment. 2. Reason two: A short circuit in the dashboard chassis wiring harness. 3. Reason three: Wheels not being straightened after parking. 4. Reason four: Battery depletion leading to electronic function failure. Relevant information about the steering column lock is as follows: 1. Steering column lock: It is a steering column locking device. 2. The steering column lock includes: a key switch module that can generate a detection signal when the car key or portable terminal is inserted or removed; an owner authentication module that can perform authentication steps for the inserted or removed car key or portable terminal based on the detection signal from the aforementioned key switch module; and a locking plate that physically restricts the rotational movement of the steering shaft.
5
4
Share

Where is the jump-starting point for the Mercedes-Benz B200?

Jump-starting position for the Mercedes-Benz B200: 1. There is a black plastic cover at the lower left of the car's front windshield. 2. Simply remove it to reveal the battery. 3. The red cover on the battery is the positive terminal, while opening the engine block will expose the negative terminal, which is a black electrode head. Precautions for jump-starting: 1. Connect positive to positive and negative to negative. 2. When a car requires jump-starting, it is usually due to a dead battery preventing the car from starting, hence the need for emergency jump-starting. 3. Jump-starting requires a rescue vehicle and a live wire capable of connecting the cables. Charging for about 20 minutes should start the car. 4. To prevent car battery drain, always pay attention to the car's electrical safety. Avoid using electrical devices without starting the car, and when parking for extended periods, remove the car's negative terminal.
10
5
Share

How to Lift Up the Wiper of Changan CS35?

The operation to lift up the wiper of Changan CS35 is as follows: 1. Turn the key from the ON position to the OFF position. 2. Within 5 seconds, move the wiper lever from its OFF position upwards to the MIST position (i.e., push forward) and hold it in the MIST position for more than 1 second. Detailed instructions for using the Changan CS35 wiper: 1. The wiper control lever is located on the back of the steering wheel. 2. The "OFF" position is the position to turn off the wiper. 3. The "MIST" position is the single wipe position. 4. The "INT" position is the intermittent wipe position, and the knob on the right can adjust the intermittent time. 5. The "LO" position is the low-speed wipe position. 6. The "HI" position is the high-speed wipe position. 7. The "ON" position on the right is the rear wiper activation position.
8
0
Share

Is the Borgward BXi7 a two-wheel drive or four-wheel drive vehicle?

The Borgward BXi7 is a four-wheel drive vehicle. Below are the specific details about the Borgward BXi7: 1. The Borgward BXi7 is a pure electric vehicle, and this model is a dual-motor vehicle. This car has one motor on the front axle and another motor on the rear axle, with a combined power output of 178kw and a total torque of 390 Nm. This vehicle uses a ternary lithium battery. 2. Pure electric vehicles represent the future trend of automotive development. The motors in pure electric vehicles operate without excess noise or vibration, providing a quieter cabin environment during driving. The power delivery method of electric motors in pure electric vehicles also differs from that of conventional internal combustion engines. Typical internal combustion engines require reaching a certain RPM to deliver maximum torque, whereas electric motors do not. When a pure electric vehicle is stationary and the accelerator pedal is fully depressed, the motor can immediately deliver maximum torque.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.