Is the Audi Q2L compliant with China National V or China National VI emission standards?

Can the ETC still be used if it falls off?

ETC cannot be used if it falls off. To prevent the phenomenon of one ETC being used for multiple vehicles, there is a small button on the ETC installation surface. If this button pops out, the ETC will automatically become invalid. Even if it is reattached, it will not function properly. Solution for a fallen ETC: Go to the original issuing point or the provincial highway ETC service center to have it reinstalled and reactivated. ETC is the Electronic Toll Collection system, which is an automatic toll collection system for highways or bridges. It achieves the purpose of vehicles passing through highway or bridge toll stations without stopping to pay tolls by using dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, and then processing the transaction through computer networking technology with the bank for backend settlement.

12

4

Share

What procedures are required to change the color of a car?

The procedures required to change the color of a car include: color change application, vehicle model information, motor vehicle registration certificate, vehicle license, original and copy of the owner's ID card. Not all cars are allowed to change color, only domestic cars can, imported cars are prohibited from changing color. The paint color must not be the same as that of special vehicles, and the appearance must not be equipped with modified parts. It is important to go to a car beauty and maintenance enterprise that meets national qualifications for color change, only in this way can it pass the verification. Pay off the fines before changing the color of the vehicle. Because the registration procedure for changing the body color requires changing the original vehicle registration information and replacing the original vehicle license, it is equivalent to registering a new car again.

12

0

Share

What brand is the Murano transmission fluid?

Murano transmission fluid is of the NS-3 brand. Transmission fluid is an oil product that keeps the gear system clean, lubricates to extend the life of the transmission device, and provides effective lubrication even at low temperatures, reducing oil loss under harsh operating conditions. For the Nissan Murano, it is recommended to change the transmission fluid every 40,000 to 60,000 kilometers, with approximately 5 liters of fluid typically required for a replacement. Notes on checking and replacing Nissan Murano transmission fluid: 1. Regularly check whether the automatic transmission fluid level is normal. The method for checking automatic transmission fluid differs from engine oil; engine oil is checked in a cooled state, while transmission fluid needs to be preheated to about 50°C. Then, after shifting the gear lever through each position for 2 seconds and placing it in park, the normal fluid level on the dipstick should be between the maximum and minimum lines. If it is insufficient, add the same quality fluid promptly. 2. Generally, transmission fluid should be replaced every 80,000 kilometers or every 3 years. Additionally, due to differences in transmission types among various vehicle models, the amount of transmission fluid required varies. For specific maintenance intervals and quantities, refer to the 'self-service maintenance' function. 3. When replacing transmission fluid, it is essential to use the same type as the original vehicle. That is, manual transmission vehicles can only use manual transmission fluid (also called gear oil), while automatic transmission vehicles (including semi-automatic ones) must use automatic transmission fluid, ensuring the correct fluid specification is selected. 4. Different brands of automatic transmissions have different friction coefficients, so Automatic Transmission Fluid (ATF) varies and should not be mixed. Mixing ATF can damage the transmission's friction plates, leading to clutch or brake slippage, and in severe cases, can destroy the friction plates.

14

4

Share

What is the wheelbase of the BMW 3 Series?

BMW 3 Series wheelbase: 1. Standard wheelbase version: Wheelbase 2810mm, vehicle length 4610mm, which is the original BMW 3 Series, with the badge 3xxi. 2. Long wheelbase version: Wheelbase 2920mm, vehicle length 4720mm, this is a modified version of the original 3 Series with an increased wheelbase of 110mm and a corresponding increase in vehicle length by 110mm, with the badge 3xxLi. Introduction to wheelbase: 1. From a design perspective: Wheelbase is a very important parameter closely related to the performance of the car. The wheelbase determines the position of the car's center of gravity. Therefore, once the wheelbase is changed, the overall layout design must be redone. 2. From a practical use perspective: The length of the wheelbase directly affects the length of the car, which in turn affects the internal space of the vehicle.

4

1

Share

Is China VI Standard Fuel Ethanol Gasoline?

No. China VI gasoline and ethanol gasoline are two completely different concepts. In addition to reducing vehicle emissions, the use of China VI fuel also reduces the formation of engine carbon deposits and engine wear due to lower levels of combustion waste and impurities, which can extend engine life to some extent. Ethanol gasoline, on the other hand, is a new alternative fuel formed by mixing fuel ethanol and regular gasoline in a certain proportion. China VI gasoline has the following characteristics: 1. Stricter olefin content limits: reduced from 24% to 18% in China VIa phase and 15% in China VIb phase; 2. Stricter aromatic content limits: reduced from 40% to 35%; 3. Stricter benzene content limits: reduced from 1% to 0.8%, stricter than the EU standard of 1%; 4. Stricter gasoline distillation 50% evaporation temperature limits: reduced from 120°C to 110°C.

7

1

Share

How Large is the Car Starting Current?

Typically, the battery output current for starting a gasoline engine can reach 200-600 amps, while for a diesel engine, it can reach up to 1000 amps. Relevant information about the starting current is as follows: 1. Introduction: The starting current of a motor refers to the line current input when the motor is connected to the rated voltage and starts from zero speed. The starting current of a motor is generally 5 to 7 times its rated current. A motor's excessively high starting current can significantly impact electrical equipment and the power grid. 2. Negative Effects: If the motor's load is too heavy and it cannot reach the rated speed within a short time; or if the voltage is too low and the motor cannot reach the rated speed for an extended period; as well as if the motor is started multiple times in succession or frequently reversed, all these scenarios may cause the motor's windings to overheat, and in severe cases, the windings may burn out due to overheating.

2

5

Share

Is the Audi Q2L compliant with China National V or China National VI emission standards?

Can the ETC still be used if it falls off?

What procedures are required to change the color of a car?

What brand is the Murano transmission fluid?

What is the wheelbase of the BMW 3 Series?

Is China VI Standard Fuel Ethanol Gasoline?

How Large is the Car Starting Current?

What is the method for adjusting direction when reversing into a parking space?

How often should car refrigerant be replenished?

Can You Add Fuel First and Then Fuel Additive?

Can the Cayenne use 95 octane gasoline?