Is the Audi EPC light on serious?

How long is the penalty for parking within the grid lines?

Parking within the grid lines is considered a violation regardless of duration. Yellow grid lines are used to mark areas where parking is prohibited for any reason, typically painted at intersections, entrances, and other locations prone to temporary parking that may cause traffic congestion. In other words, parking is strictly prohibited within yellow grid lines as they are usually located near intersections or entrances of important facilities. Below are details about grid lines: 1. Location: Grid lines are painted on roads in front of large institutions or emergency service facilities (such as fire stations, hospitals, etc.); they are also painted at roadside three-way intersections (where traffic lights are inconvenient to install) with frequent vehicle access. 2. Driving regulations: When there are vehicles waiting at a red light on the opposite side of the yellow grid, incoming vehicles must wait at the other end of the grid and are not allowed to enter the grid area to wait for the red light, otherwise it will be considered a violation.

16

2

Share

Why does the fuel float fail to rotate?

The fuel float's inability to rotate is caused by aging of the float. Below is an introduction to fuel float-related information: 1. Fuel float: Also known as the fuel tank float in automobiles, it serves not only as a fuel level indicator but also as a sensing device for fuel level. This device, together with the fuel gauge, forms a fuel level detection system in vehicles. Therefore, it is integrated with the fuel pump. It floats entirely by buoyancy on the fuel surface, meaning the position of the float indicates the fuel level. Thus, by observing it, one can determine the fuel quantity in the tank. 2. Principle: The float stays afloat on the fuel surface by buoyancy, with its position indicating the liquid level. Knowing the liquid level height allows determining the fuel volume inside the tank based on the tank's shape.

7

0

Share

What is the speed limit for cars on first-class roads?

First-class roads have a speed limit of 60-100km/h for cars. Below are detailed explanations about vehicle speed: 1. Overview: Vehicle speed refers to the distance a car travels per unit of time, commonly measured in kilometers per hour or meters per second. It is one of the three key parameters in traffic flow theory and holds significant importance in traffic flow studies. 2. Others: Vehicle speed can also broadly refer to motor vehicle speed. Depending on different purposes, vehicle speeds are mainly categorized into spot speed, section speed, and design speed. Spot speed is the instantaneous speed of a vehicle passing a specific point on the road. Design speed is the speed set to determine design indicators for various geometric elements of the road and ensure their coordination.

2

5

Share

What is the reason for the idle oil light coming on and then going off when revving the throttle?

The reason for the idle oil light coming on and then going off when revving the throttle is: 1. The engine oil is too thin; 2. Wear of the vehicle's engine crankshaft bearing; 3. The engine oil pump is not working properly; 4. Faulty engine oil pressure sensor. The reasons for the car oil light coming on are: 1. Insufficient oil quantity; 2. Clogged oil passages; 3. Low oil viscosity; 4. Oil pump issues; 5. Problems with the oil sensor; 6. Electromagnetic interference. The steps for changing the oil are: 1. Lift the car, remove the undercover, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler port for two minutes, after draining, tighten the oil drain plug and wipe it with a tissue to check for oil leaks; 3. Reinstall the undercover and lower the car, use a funnel to add oil into the oil filler port.

15

1

Share

What Causes the Wrench Warning Light to Illuminate in a Car?

The wrench light is a maintenance reminder indicator. It illuminates when the vehicle has reached a certain mileage and requires servicing. The maintenance cycle is preset by the manufacturer, and the wrench light will appear at specific mileage intervals to remind the driver to perform timely maintenance. In some car models, the wrench symbol disappears after maintenance; however, in others, it may not disappear automatically and must be cleared using a diagnostic tool. The hazards of prolonged neglect of car maintenance are as follows: Brake Fluid Deterioration: Brake fluid contains ethylene glycol, which deteriorates upon contact with water. Since the braking system is exposed, it easily absorbs moisture from the air. Failure to replace the brake fluid for an extended period can lead to water contamination, resulting in brake failure or ineffective braking. Engine Malfunction: If a car goes without maintenance for a long time, engine problems may arise. Deteriorated or insufficient engine oil can cause severe wear on internal components. Thickened oil fails to lubricate the engine properly, leading to issues like cylinder scuffing, scoring, or seizure. Brake Pad Wear: Frequent braking during driving can cause significant wear on the brake pads if the car is not maintained regularly. This can eventually lead to brake failure.

7

0

Share

What is the solution for a 3-day overdue biennial exemption inspection?

The solution for a 3-day overdue biennial exemption inspection is: Go to the vehicle management office for the annual inspection as soon as possible. Vehicles without an annual inspection are not qualified to drive on the road. New cars are exempt from annual inspection for 6 years, during which they can enjoy two opportunities for exemption from on-site vehicle inspection. For exempted vehicles, the owner only needs to collect the annual inspection mark every two years during the exemption period, without the need for on-site inspection. For vehicles that do not qualify for exemption, the annual inspection should be conducted in accordance with the relevant regulations for motor vehicle annual inspections. The items of the annual inspection include: 1. Check whether the engine, chassis, body, and their accessories are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records; 2. Check whether the vehicle's braking performance, lights, exhaust, and other safety performance meet the requirements of relevant regulations; 3. Check whether the vehicle has been modified, remodeled, or altered, and whether the driving license, license plate, and all vehicle file registrations match the actual condition of the vehicle; 4. Check whether the license plate, driving license, and the enlarged license plate characters printed on the vehicle are damaged, altered, or illegible, and whether they need to be replaced.

4

5

Share

Is the Audi EPC light on serious?

How long is the penalty for parking within the grid lines?

Why does the fuel float fail to rotate?

What is the speed limit for cars on first-class roads?

What is the reason for the idle oil light coming on and then going off when revving the throttle?

What Causes the Wrench Warning Light to Illuminate in a Car?

What is the solution for a 3-day overdue biennial exemption inspection?

What is the Difference Between Hard Return and Soft Return?

What are the reasons for the difficulty in starting the seventh-generation Honda Accord in winter?

What current should be set for a car battery charger?

Can a Dash Cam Capture the Side of a Car?