Is the Audi A4L produced by SAIC or FAW?

1 Answers
SanTheo
07/29/25 11:14pm
Audi A4L is entirely produced by the Audi manufacturing plant in Changchun, China. Audi models with the 'L' suffix in their tail badges are generally domestically produced, specifically by FAW-Volkswagen Audi. In contrast, the Audi A4 is imported from abroad, with the key difference being that the Audi A4 is an imported station wagon, while the A4L is a sedan produced by FAW-Volkswagen Audi. Introduction to FAW-Volkswagen Audi: FAW-Volkswagen Audi has become a renowned automobile manufacturer. It has independently produced over 1,000,000 vehicles, including models such as the Audi 100, Audi 200, Audi A4, Audi A6, Audi A4L, Audi A6L, and Audi Q5 (SUV). Introduction to Audi: Audi is a German luxury car brand, symbolized by four interlocking rings. It is currently a subsidiary of Volkswagen Group. On December 20, 2018, Audi ranked 51st in the World's 500 Most Influential Brands list. In October 2019, it was ranked 42nd in Interbrand's Global Top 100 Brands list.
Was this review help?
13
3
Share
More Forum Discussions

Which engine oil is best for Nissan Sylphy?

Nissan Sylphy performs well with mineral engine oil. The functions of engine oil are: 1. As a lubricant, it reduces friction and wear between moving parts; 2. As a coolant, it absorbs heat generated in the engine combustion chamber and piston crown, cooling the engine and preventing overheating; 3. As a sealant, it fills the gap between piston rings and cylinder liners to prevent combustion pressure leakage. The Nissan Sylphy is a 4-door, 5-seater compact sedan with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a trunk capacity of 510 liters.
15
3
Share

Where is the turn signal fuse located in the Nissan Sylphy?

The turn signal fuse in the Nissan Sylphy is located in the fuse box in the front engine compartment. The turn signal is an indicator light that alerts vehicles and pedestrians when the vehicle is turning. It uses a xenon lamp tube and is controlled by a single-chip microcomputer circuit, operating with alternating left and right flashes. Taking the 2021 manual comfort version of the Nissan Sylphy as an example, its body dimensions are: 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 50 liters. The 2021 manual comfort version of the Nissan Sylphy features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122ps, a maximum power of 90kW, and a maximum torque of 155Nm.
11
4
Share

How many bottles of fuel additive should be added at one time?

Only one bottle of fuel additive should be added at a time. For new vehicles with less than 20,000 kilometers of mileage, it is unnecessary to add fuel additive. For vehicles exceeding 20,000 kilometers, it should be added as needed, typically one bottle per tank of fuel. Long-term use of fuel additive is harmful to the engine, and excessive use can increase carbon deposits in the combustion chamber, even leading to engine knocking or detonation, and worsening vehicle exhaust emissions. The functions of fuel additive are: 1. Remove carbon deposits from the car; 2. Reduce abnormal engine wear; 3. Improve atomization efficiency; 4. Reduce vehicle emissions; 5. Extend the service life of the car engine; 6. Clean the fuel system.
4
4
Share

What are the main components of the crank connecting rod mechanism?

The main components of the crank connecting rod mechanism are: the engine block group, the piston connecting rod group, and the crankshaft flywheel group. Its function is to convert the reciprocating motion of the piston into the rotational motion of the crankshaft, while converting the force acting on the piston into the torque output by the crankshaft to drive the rotation of the car wheels. The differences between the engine block group, the piston connecting rod group, and the crankshaft flywheel group are: 1. The engine block group consists of: the cylinder block, cylinder gasket, cylinder head, crankcase, cylinder liner, and oil pan. 2. The piston connecting rod group consists of: the piston, piston rings, piston pin, and connecting rod. 3. The crankshaft flywheel group consists of: the crankshaft, flywheel, torsional damper, and balance shaft.
6
5
Share

What is the method for cleaning a car's air conditioning system?

Car air conditioning cleaning method is: 1. Start the engine and open all windows; 2. Set the air conditioning to external circulation with fan speed at level 3; 3. Open the hood, use hand or newspaper to test the air intake and locate the suction point; 4. Remove the car's air filter and shake the air conditioning cleaner well; 5. Press the cleaner button and spray into the evaporator from the suction point; 6. Turn off the air conditioning and let it sit for 5-10 minutes; 7. Turn on the air conditioning to external circulation at level 3, spray remaining cleaner into the evaporator; 8. Wait for 5 minutes, then switch to internal circulation; 9. After another 5 minutes, set to external circulation at level 4.
14
3
Share

How Many Years Can a Fuel Pump Last?

Fuel pumps can last for 5 years. Depending on the driving method, they can be divided into mechanically driven diaphragm type and electrically driven type. The functions of a fuel pump: 1. Draw fuel from the fuel tank, pressurize it, and deliver it to the fuel supply pipe, working with the fuel pressure regulator to establish fuel pressure; 2. Deliver high-pressure fuel to the fuel distribution pipe, ensuring a continuous supply of fuel to the fuel injectors. Safety precautions for fuel pump fault detection: 1. When troubleshooting a fuel pump that has been used for a long time, do not perform a dry test to avoid sparks caused by poor contact between the brush and the commutator, which could ignite the fuel inside the pump casing and cause an explosion; 2. After removing the fuel pump from the fuel tank, clean it promptly to avoid generating sparks.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.