Is the Atenza a Rear-Wheel Drive Car?

1 Answers
McAlice
07/29/25 10:38pm
The Atenza is a front-engine, front-wheel-drive vehicle. Here are some key details about the Atenza: 1. Handling: The new Atenza offers an advanced driving experience with its 'Jinba Ittai' (horse and rider as one) philosophy. Whether starting, moving, turning, or stopping, both the driver and passengers will notice the car's responses align with expectations. Acceleration, deceleration, and cornering are linear, continuous, and smooth, with no delays, jerks, or abruptness, ensuring a reassuring and comfortable ride. 2. Features: As Mazda's latest flagship model, one of the Atenza's standout highlights is its application of the SKYACTIV technology. Compared to traditional naturally aspirated engines, the Atenza's SKYACTIV engine boasts a high compression ratio of 13:1, improving fuel efficiency and torque by 15%. The vehicle comes standard with features like the i-stop idling stop system and brake energy regeneration system. The 2.5L variant accelerates from 0-100 km/h in just 8.3 seconds, with a combined fuel consumption as low as 6.9 L/100 km, while the 2.0L model achieves an impressive 6.3 L/100 km.
Was this review help?
12
3
Share
More Forum Discussions

Can You Still Drive with a Damaged Thrust Bearing?

You cannot continue driving with a damaged thrust bearing. The impact of a damaged thrust bearing should not be overlooked. In mild cases, it affects comfort, increases tire noise, and causes the vehicle to pull to one side. In severe cases, it can lead to suspension damage, resulting in steering system failure and traffic accidents. Below is a detailed introduction to car driving: Overview: Driving a car is one of the basic skills that modern people need to master. To acquire car driving (driving-a-motor-vehicle) skills, one must meet the required age and physical conditions, and undergo training and examinations on road traffic safety laws and regulations, general knowledge of automotive mechanics, and safe driving practices. Others: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal procedure that must be issued by a specialized authority.
19
0
Share

What are the speed requirements for each gear in a manual transmission car?

Manual transmission car speed requirements for each gear are: 1. 1st and 2nd gears correspond to speeds of 5 to 20 kilometers per hour; 2. 3rd gear corresponds to speeds of 20 to 40 kilometers per hour; 3. 4th gear corresponds to speeds of 40 to 60 kilometers per hour; 4. 5th gear corresponds to speeds of 60 to 100 kilometers per hour. The functions of each gear in a manual transmission car are: 1. 1st gear is the starting gear, used for vehicle launch; 2. 2nd gear is the passing gear, used for navigating complex road surfaces and handling difficult situations; 3. 3rd gear is the transition gear, used for low-speed driving in urban areas; 4. 4th gear is the cruising gear, used for prolonged high-speed driving; 5. 5th gear is the high-speed gear, used for long-distance highway driving.
7
5
Share

How to Obtain the Vehicle Annual Inspection Sticker?

To obtain the vehicle annual inspection sticker, the vehicle owner needs to bring the original vehicle registration certificate, the owner's original ID card or a copy of the company's business license, the original compulsory traffic insurance policy, and the original vehicle and vessel tax payment receipt to the local traffic police department where the vehicle is registered. The annual inspection refers to a mandatory test for vehicles that have already obtained official license plates and registration certificates. Its purposes are: 1. To promptly eliminate potential safety hazards of the vehicle; 2. To encourage enhanced vehicle maintenance; 3. To reduce the occurrence of traffic accidents. The items inspected during the vehicle annual inspection include: 1. Checking whether the engine, chassis, body, and their accessories are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records; 2. Verifying whether the braking performance, steering control, lighting, exhaust, and other safety performance meet the required standards.
17
1
Share

Under what circumstances can reverse parking be successful in one attempt?

Reverse parking can usually be successful in one attempt when the vehicle is properly aligned, the reference points are accurate, and the driver maintains a calm mindset. Overview: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013, primarily assessing the driver's ability to maneuver the vehicle in a confined space. It is a key evaluation point in the driver's test, requiring the driver to correctly reverse the vehicle into a garage from both sides while in motion. Additional Information: The test area is 16 meters long and 6.83 meters wide. The garage is 5.25 meters long and 2.31 meters wide. Failing to follow the designated route or sequence results in disqualification. Touching the boundary lines or failing to park the vehicle properly also leads to disqualification. Exceeding the 210-second time limit for completing the reverse parking results in disqualification. Stopping midway deducts 5 points per occurrence.
13
1
Share

How Often Should a Car Sunroof Be Maintained?

Car sunroofs should be maintained every 2 to 3 months, and the maintenance steps are as follows: 1. Fully open the sunroof and gently wipe off the dust on the sunroof guide rails with a clean cloth; 2. Lubricate the moving parts and sliding pipes of the sunroof; 3. Open and close the sunroof several times, then wipe off excess lubricant with a cloth. Installed on the roof of the car, the sunroof effectively promotes air circulation inside the vehicle, increases the intake of fresh air, and also provides a broader view and meets the needs for photography and videography. Car sunroofs are categorized by function into: 1. Built-in sunroof: a sunroof with the sliding assembly located between the interior trim and the roof; 2. Pop-up sunroof: effectively promotes air circulation inside the vehicle and increases the intake of fresh air; 3. Panoramic sunroof: larger in size, featuring a full glass roof.
16
4
Share

Where is the cabin air filter located in the Dongfeng Fengshen H30?

The cabin air filter in the Dongfeng Fengshen H30 is located beneath the glove compartment on the passenger side. The cabin air filter ensures a tight seal with the housing to prevent unfiltered air from entering the vehicle cabin. It effectively separates solid impurities such as dust, pollen, and abrasive particles from the air, prevents condensation on car windows, and safeguards occupants from inhaling harmful gases, thereby ensuring driving safety. The Dongfeng Fengshen H30 is a compact car with body dimensions of 4268mm in length, 1740mm in width, 1482mm in height, and a wheelbase of 2610mm. Safety features include: four-wheel disc brakes, automatic door locking while driving, automatic unlocking upon collision, anti-mislocking mechanism, automatic sunroof closing, collision-triggered fuel cutoff system, icy road warning, and engine immobilizer. Additionally, side airbags further enhance the vehicle's safety performance.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.