Is the AMT Transmission Fast in Shifting Gears?

How to distinguish between the exterior of Lexus ES and LS?

The methods to distinguish between the exterior of Lexus ES and LS are: The body size of the Lexus ES is smaller than that of the LS. The ES is a mid-to-large-sized sedan, while the LS is a large luxury sedan. Taking the 2020 Lexus ES as an example, its body dimensions are: length 4975mm, width 1866mm, height 1447mm, wheelbase 2870mm, fuel tank capacity 49.3l, and curb weight 1720kg. Taking the 2021 Lexus LS as an example, its body dimensions are: length 5235mm, width 1990mm, height 1450mm, wheelbase 3215mm, fuel tank capacity 82l, and trunk capacity 430l.

10

3

Share

What does the 'hold' function on a car key mean?

The 'hold' function on a car key refers to the long-press operation to open the trunk. By holding the button for a few seconds, the trunk can be opened. This long-press design is primarily to prevent the accidental opening of the trunk while the vehicle is in motion, which could be dangerous. Types of car keys include: mechanical keys, remote control keys, touchscreen LCD keys, and smart wristband keys. The functions of car keys are: 1. Automatically closing windows after turning off the engine; 2. Conveniently locating the car in a parking lot; 3. Automatically opening the trunk; 4. Remotely opening windows. Precautions for using car keys are: 1. Do not place them near electronic devices; 2. Avoid exposing the key to direct high temperatures; 3. Do not use batteries with different power levels.

14

5

Share

Is the 2016 BMW X1 rear-wheel drive?

The 2016 BMW X1 is not rear-wheel drive; starting from the 2016 model, the BMW X1 became a front-wheel-drive vehicle. The 2016 BMW X1 is a compact SUV with body dimensions of: length 4565mm, width 1821mm, height 1624mm, a wheelbase of 2780mm, a fuel tank capacity of 61 liters, and a curb weight of 1550kg. The 2016 BMW X1 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 136 PS, a maximum power of 100 kW, and a maximum torque of 220 Nm, paired with a 6-speed automatic transmission.

15

0

Share

What Causes Steering Wheel Shaking on the Highway?

Highway steering wheel shaking can be caused by: 1. Incorrect front wheel alignment angles or excessive toe-in; 2. Low front tire pressure or tire imbalance due to repairs; 3. Deformed front wheel rims or unequal number of tire bolts; 4. Loose installation of drivetrain components; 5. Bent drive shaft, power imbalance, or deformed front axle; 6. Shock absorber failure. Precautions for steering wheel use include: 1. Reduce steering angle at high speeds; 2. Straighten the wheel when the vehicle's midpoint crosses the centerline; 3. Align the wheel when the front of the car faces the lane centerline.

6

0

Share

What brand is CST tire?

CST tire is Cheng Shin tire, a foreign-invested enterprise jointly operated by Cheng Shin Rubber Industry Co., Ltd. of Taiwan Province and Toyo Rubber Industry Co., Ltd. of Japan. Cheng Shin Rubber Industry Co., Ltd. is a tire manufacturer in Taiwan Province, registered on January 1, 1967. Its main products include inner and outer tires for rickshaws, bicycles, motorcycles, ATV tires, agricultural and industrial vehicle tires, truck and bus inner and outer tires, as well as radial tires for cars, light trucks, and trailers. It mainly produces radial tires, bias tires, and other rubber products for automobiles, and is one of the largest rubber tire manufacturers in China. The company has a technical cooperation relationship with Japan's Toyo Tire and exports globally under brands such as "ChengShin," "CST," and "Maxxis." Maxxis is a high-end tire brand under the Cheng Shin International Group, with products exported to more than 140 countries and regions worldwide. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance, as well as high wear resistance and flex resistance, along with low rolling resistance and heat generation. They directly contact the road surface and work with the car suspension to mitigate the impact during driving, ensuring good ride comfort and smoothness, maintaining good adhesion between the wheels and the road, improving the car's traction, braking, and off-road performance, and bearing the weight of the car. Methods for maintaining CST tires: Increase awareness of tire safety and check tires regularly. Regularly correct wheel balance. Unbalanced wheels can cause high-frequency oscillations at high speeds, leading to uneven tire wear. Regularly rotate tires. To ensure even wear on all tires of the same vehicle, rotate the tires every 5,000 kilometers. In daily use of CST tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, and other defects. Due to wear during driving, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be hidden dangers for tire blowouts at high speeds. Additionally, immediately remove pebbles from the grooves. Park on flat ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the pressure increases. In this case, stop to dissipate heat. Do not release air to reduce pressure or splash water to cool down, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and emergency braking to prevent accelerated tread wear due to dragging between the tires and the ground.

8

1

Share

What are the steps to fold the exterior rearview mirrors of a Volkswagen Polo?

The exterior rearview mirrors of a Volkswagen Polo are folded manually, as the entire Polo lineup does not come equipped with an electric mirror folding function—only mirror adjustment is available. The purpose of the rearview mirrors is to reflect conditions behind, beside, and below the vehicle, thereby expanding the driver's field of vision and reducing the occurrence of safety incidents. Taking the 2019 Volkswagen Polo as an example, it is classified as a compact car with the following dimensions: length 4053mm, width 1740mm, height 1449mm, wheelbase 2564mm, fuel tank capacity 42.5 liters, and curb weight 1145kg.

18

0

Share

Is the AMT Transmission Fast in Shifting Gears?

How to distinguish between the exterior of Lexus ES and LS?

What does the 'hold' function on a car key mean?

Is the 2016 BMW X1 rear-wheel drive?

What Causes Steering Wheel Shaking on the Highway?

What brand is CST tire?

What are the steps to fold the exterior rearview mirrors of a Volkswagen Polo?

What is the Difference Between Part-Time 4WD and Full-Time 4WD?

What are the differences between the Mercedes-Benz G500 and G63?

How to Distinguish Between Full Synthetic Oil and Semi-Synthetic Oil?

Will it be a problem if the chassis is scratched?