Is the Acura NSX engine turbocharged?

How to reset the tire pressure warning light on Roewe vehicles?

To reset the tire pressure warning light on Roewe vehicles: 1. Select 'Driving Maintenance' in the vehicle control interface; 2. Enter the tire pressure reset interface and confirm there are no tire issues; 3. Choose 'Start' while the vehicle is parked. Taking the 2020 Roewe RX5 Manual Internet Million Edition as an example, it belongs to the compact SUV category with body dimensions of: length 4556mm, width 1855mm, height 1719mm, and a wheelbase of 2700mm. The 2020 Roewe RX5 Manual Internet Million Edition is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169PS and a maximum power of 124kW.

10

3

Share

What does the red color on the fuel gauge indicate?

The red color on the fuel gauge is the warning light for the Collision Avoidance Assist System. Below is relevant information about the Collision Avoidance Assist System: 1. Sensing Technology: Monitoring components use radar, laser, sonar, and other sensing technologies to detect the speed of the vehicle, the speed of the vehicle ahead, and the distance between the two vehicles. 2. Information Processing Center: The computer processes the distance between the two vehicles and their instantaneous relative speed to determine the safe distance. If the distance between the two vehicles is less than the safe distance, the information processing center will issue a command. 3. Execution Mechanism: Implements the command from the information processing center, sounding an alarm to remind the driver to brake. If the driver does not execute the command, the execution mechanism will take measures such as closing windows, adjusting seat position, locking the steering wheel, or automatic braking.

9

3

Share

How many kilometers can a hybrid car run?

Hybrid cars can run over 300 kilometers. The following is an introduction to hybrid cars: 1. Hybrid cars: Hybrid electric vehicles (HEVs) combine fuel and electric power, where an electric motor assists the engine to drive the car, with the main power source being the engine. 2. Characteristics of hybrid cars: The electric motor assisting the engine provides strong and smooth power during normal driving. They are energy-saving and emission-reducing. Fuel-efficient, they use electric power for low-speed driving and switch to fuel only when high-speed driving requires higher power output, reducing fuel consumption and making them suitable for urban driving.

13

0

Share

How to Use Automatic Cruise Control?

Automatic cruise control is used as follows: 1. When the vehicle speed is above 40 mph, press the "on" button on the left side of the steering wheel to activate it; 2. Use the "res" and "set" buttons to fine-tune the speed, allowing for speed increase or decrease; 3. Press the brake or the "off" button on the left side of the steering wheel to deactivate it. The function of the automatic cruise control system is to automatically maintain the vehicle speed without the need to press the accelerator pedal, allowing the vehicle to travel at a fixed speed. The principle of the automatic cruise control system is that the cruise control component reads the pulse signal from the speed sensor, compares it with the set speed, and then issues commands to the servo mechanism to adjust the throttle opening, either increasing or decreasing it, so that the vehicle always maintains the set speed.

13

5

Share

What are the precautions for using hazard warning lights in cars?

Here are the precautions for using hazard warning lights: 1. Driving in foggy weather: Due to poor visibility in foggy conditions, you should not only turn on the hazard warning lights but also the fog lights to alert passing vehicles. 2. Vehicle breakdown: Or in case of a traffic accident, the hazard warning lights should be turned on to alert passing vehicles for safety. On highways, if a vehicle breaks down or is involved in an accident and stops without using the lights and setting up warning signs as required, it will result in a 12-point penalty. 3. Towing a faulty vehicle: Both the towing vehicle and the towed vehicle should turn on the hazard warning lights to alert passing vehicles that they are in an abnormal state. 4. Temporary parking: Turn on the hazard warning lights to alert other vehicles.

1

2

Share

What are the reasons for poor fuel combustion?

Reasons for poor fuel combustion are as follows: 1. Poor fuel quality: The performance indicators of the fuel used do not meet standard requirements, leading to poor combustion and the production of black smoke. Additionally, inferior fuel quality can damage the fuel filter, causing the internal fuel to deteriorate, which results in black smoke emissions. 2. Blocked air intake: The fuel tank is not sealed, and prolonged exposure to air can inevitably lead to impurities and dust from the air entering the air filter. These particles can block the air intake, preventing sufficient air supply during combustion, which easily leads to incomplete combustion. 3. Insufficient compression: One of the conditions for fuel combustion is a certain level of pressure in the combustion environment. However, if components like valves and piston rings are worn, it can lead to insufficient compression pressure, failing to meet the required combustion pressure, thereby worsening the combustion conditions.

20

1

Share

Is the Acura NSX engine turbocharged?

How to reset the tire pressure warning light on Roewe vehicles?

What does the red color on the fuel gauge indicate?

How many kilometers can a hybrid car run?

How to Use Automatic Cruise Control?

What are the precautions for using hazard warning lights in cars?

What are the reasons for poor fuel combustion?

Can a vehicle pass inspection with different tire tread patterns?

What Causes Steering Wheel Misalignment?

What does exhaust camshaft position system performance mean?

Is a Fuel Consumption of 5.5 Considered Fuel-Efficient?