Is the Actual Fuel Consumption of the Haval Chitu Still High?

2 Answers
Hope
09/02/25 8:40am
Haval Chitu's combined fuel consumption is 4.7-6.7L/100km. Currently, there are 6 models of Haval Chitu on sale. The combined fuel consumption of the Haval King Rabbit is 4.7L/100km. The Gold Rabbit, Platinum Rabbit, and Silver Rabbit have a combined fuel consumption of 6.2L/100km. The Bronze Rabbit and Copper Rabbit have a combined fuel consumption of 6.7L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.0-8.1L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates that there is a considerable amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits in the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the air-fuel ratio of the engine. Once damaged, it will cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. If the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
Was this review help?
1
5
Share
DianaAnn
09/15/25 3:45am
I've been driving the Haval Chitu for several months now, and the actual fuel consumption is indeed a bit higher than expected. For my daily urban commute, the average is around 9 to 10 liters per 100 kilometers, slightly above the official figures. This is partly due to my driving habits, such as aggressive acceleration in traffic jams and frequent hard braking, which increases fuel consumption. However, I've noticed that driving more gently—maintaining a steady speed and avoiding sudden acceleration—can save me 1 to 2 liters. On the highway, it performs better, consuming only about 8 liters, which is quite reassuring. For those considering purchasing, I'd recommend the 1.5T low-power version for better fuel efficiency. Also, regular maintenance like changing the air filter and checking tire pressure can help improve mileage. Saving on fuel isn't trivial—over time, it can save you thousands in annual fuel costs!
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What does the Volkswagen P044100 fault code mean?

Volkswagen P044100 fault code indicates poor exhaust flow in the car's fuel tank. Below is relevant information about automotive fault codes: Meaning: Automotive fault codes are codes generated by the vehicle's ECU (Engine Control Unit) when a fault is detected. Common fault codes are often related to sensor malfunctions or poor sensor performance. However, some mechanical faults cannot be read by the ECU. While the car's dashboard may display some basic fault indicators, these are only a small portion. The main diagnosis requires specialized equipment—a code reader. There are various types of code readers, such as X-43KT300, but they all work on the same principle and read the same fault codes. Classification: Fault codes are categorized into active codes, history codes, and intermittent codes. Active codes are easy to detect, history codes are remnants of previously unresolved faults, and intermittent codes are not consistent.
3
2
Share

What is the normal oil temperature for Volkswagen CC?

An oil temperature of 100 degrees is normal, as the working temperature of engine oil typically ranges between 70 and 90 degrees. Below is relevant information about automotive engine oil: Functions of engine oil: Alleviates friction and high temperatures, reduces gas leakage, prevents contamination from external sources, protects against contact between water, air, acidic harmful gases and engine components, cushions pressure surges in engine cylinders, and cleans contaminants generated on component surfaces. Introduction to engine oil: Engine oil, also known as engine lubricant, serves multiple purposes including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of a vehicle. Engine oil consists of two main components: base oil and additives. The base oil forms the primary constituent of the lubricant, determining its fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics and serving as a vital component of the lubricant.
17
5
Share

Does the passenger seat have an airbag?

The passenger seat has an airbag. The passenger airbag is installed in front of the passenger seat, typically above the glove compartment on the dashboard, and is a passive safety feature. In the event of a collision, the passenger airbag protects the passenger by isolating the head and torso from direct impact with the panel, cushioning the inertial displacement of the head caused by the collision, and preventing fatal injuries. How the passenger airbag works: 1. When sensors detect a collision, the gas generator ignites, causing an explosive reaction that produces nitrogen or releases compressed nitrogen to fill the airbag. When the passenger comes into contact with the airbag, the collision energy is absorbed through cushioning, thereby protecting the passenger. 2. As a passive safety device, the protective effect of airbags is widely recognized, with the first patent for airbags dating back to 1958.
1
2
Share

What does 235/55R17 mean on a tire?

235/55R17 tire specifications explained: 1. 235 indicates the section width, which simply means the width of the tire tread. 2. 55 represents the aspect ratio, referring to the height of the tire sidewall. 3. R stands for the tire type code, with R denoting radial tires. 4. 17 indicates the rim diameter, meaning the tire is suitable for 17-inch wheels. Additional information about tires: Tires are circular elastic rubber products mounted on metal rims, designed to support vehicle weight, absorb external shocks, maintain contact with the road surface, and ensure driving performance in various vehicles or machinery.
12
3
Share

Are windshield wipers one long and one short?

Most vehicle models have one long and one short wiper, with the driver's side being longer and the passenger side shorter. This design ensures absolute clarity of the driver's vision, protecting the safety of passengers during rainy weather. Of course, there are also models where the driver and passenger side wipers are of equal length, primarily because these vehicles have windshields with larger curvatures. Using wipers of unequal lengths on such windshields may result in missed spots. It is recommended to replace wipers with the original size specified for the vehicle and not to increase or decrease the size arbitrarily. Methods to extend the lifespan of windshield wipers: 1. Avoid dry wiping; always spray windshield washer fluid before activating the wipers to prevent damage to the rubber blades and motor. Regularly check the level of the washer fluid. Typically, the washer fluid filler cap only indicates the "MAX" maximum level and not the minimum, so drivers should keep an eye on the fluid level and top it up when necessary. 2. If the windshield is very dirty, with sand or dust, clean off the debris before using the wipers. Do not rely solely on the wipers to clean everything, as this not only wears out the wipers but may also scratch the windshield with the dirt. 3. Using specialized wiper fluid or windshield washer fluid can better protect the wipers and improve the cleaning effect on the windshield. During winter, it is essential to choose antifreeze windshield washer fluid. 4. In cold weather, always check if the wiper blades are frozen to the windshield before use. If the wipers are stuck to the windshield due to snow or frost, never rinse them with hot water directly, as the sudden temperature change can cause the windshield to crack or the wipers to deform.
17
5
Share

What is the Difference Between CF and CH Engine Oil?

Here are the differences between CF and CH engine oil: 1. Different grades. The first letter of diesel engine oil is "C", and the grades are CA, CB, CC, CD, CE, CF, CF-4, CG-4, CH-4, CI-4, CJ-4. Each subsequent letter represents a higher quality level, meaning CH grade is higher than CF. 2. Different performance. With each increase in letter grade, the oil's performance surpasses the previous one. Whether it's the oil's stability (cleaning and dispersing properties) or its protective performance for the engine (corrosion resistance and oxidation resistance), CH grade oil outperforms CF. 3. Different applications. (1) CF-4 grade diesel engine oil—suitable for high-speed, heavy-duty, long-cycle diesel engines. (2) CH-4 grade diesel engine oil—suitable for bi-metal piston engines (with strong resistance).
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.