Is the Accord a Class B or Class C vehicle?

1 Answers
SanAnderson
07/30/25 1:42am
The Accord belongs to the Class B category. With body dimensions of 4906X1862X1449mm and a wheelbase of 2830mm, it is evident from these specifications alone that the Accord is a Class B vehicle, which is a mid-size car with a wheelbase ranging from 2700-3000mm. Class B Vehicles: Class B vehicles are referred to as mid-size sedans, with a wheelbase approximately between 2450 to 2600mm and engine displacements ranging from 1.6 to 2.4 liters. Representative models include the Volkswagen Santana, Passat, Magotan, Audi A4, BMW 3 Series, Honda Accord, and Toyota Camry. Class C Vehicles: Class C vehicles are also known as executive cars (or full-size sedans), featuring a wheelbase of about 2600 to 2800mm and engine displacements between 2.3 and 3.0 liters. Key models in this category include the Mercedes-Benz E-Class, BMW 5 Series, Audi A6, and Infiniti M35.
Was this review help?
16
5
Share
More Forum Discussions

What type of transmission does the Atenza use?

Atenza uses a 6-speed automatic manual transmission, also known as a 6AT transmission. Below is the relevant content: Atenza configuration: The Atenza is a mid-size sedan under the Mazda brand. This car is equipped with two engines: one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. Atenza power: The 2.0-liter naturally aspirated engine has a maximum power of 158 horsepower and 202 Nm of torque, outputting a maximum power of 158 kW at 6,400 rpm and a maximum torque of 202 Nm at 4,000 rpm. The 2.5-liter naturally aspirated engine outputs a maximum power of 192 kW at 6,100 rpm and a maximum torque of 252 Nm at 3,250 rpm.
14
5
Share

Does the Honda XR-V have an automatic transmission?

Honda XR-V does have an automatic transmission. An automatic transmission typically refers to a car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load during driving, thereby replacing the driver's subjective judgment and gear-shifting operations. The Honda XR-V is a vehicle produced by Dongfeng Honda, with dimensions of 4270mm in length, 1772mm in width, and 1605mm in height, and a wheelbase of 2610mm. In terms of configuration, this car comes standard with features such as driver and front passenger airbags, tire pressure monitoring system, anti-theft alarm, ABS anti-lock braking system, brake force distribution, brake assist, traction control, electronic stability control, hill start assist, and auto hold.
18
2
Share

What are the steps for starting a manual transmission car?

The steps for starting a manual transmission car are: 1. Start the engine and observe whether the instrument panel is functioning normally; 2. Turn on the left turn signal, adjust the rearview mirror, and check for any unsafe conditions behind the vehicle, then press the clutch pedal; 3. Shift the gear lever into the starting gear; 4. Sound the horn while observing the front, left, right, and rearview mirrors for any obstacles that may hinder starting; 5. Hold the steering wheel steady, turn on the left turn signal, and release the parking brake; 6. Lift the clutch pedal with the left foot according to the proper technique while moderately pressing the accelerator pedal to start the vehicle smoothly; 7. After the vehicle starts smoothly, turn off the left turn signal.
19
0
Share

Should Car Body Be Wrapped with Film?

Car body should be wrapped with film. The body film is attached to the surface of the car paint to achieve the purpose of protecting the original paint and decorating the car body, and can be easily removed at any time, forming a sharp contrast with traditional paint surface chemical changes such as glaze sealing, coating, and painting. Car body film is a high-performance, low-viscosity PVC film specially designed for car body wrapping, with the property of fully adhering to various substrate surfaces of car paint and interior. The functions of car body film include: 1. Not damaging the original car paint, enhancing the protection of the original car paint; 2. Changing to the color preferred by the car owner, creating a personalized car; 3. Resisting chemical corrosion and erosion from acid rain, insect remains, bird droppings, resin, etc.
12
4
Share

What are the differences between the BMW 530 and BMW 525?

The differences between the BMW 530 and BMW 525: 1. Different engines: The BMW 530 uses a high-power version of the 2.0-liter turbocharged engine; the 525 uses a low-power version of the 2.0-liter turbocharged engine. 2. Different body dimensions: The BMW 530 has a body length, width, and height of 4954mm, 1868mm, and 1489mm respectively; the 525 has a body length, width, and height of 5087mm, 1868mm, and 1500mm respectively. 3. Different wheelbases: The BMW 530 has a wheelbase of 2975mm; the 530 has a wheelbase of 3108mm. The BMW 5 Series uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear, ensuring excellent handling and ride comfort.
20
4
Share

How Many Cylinders Does the Chevrolet Orlando Engine Have?

Chevrolet Orlando is equipped with a three-cylinder engine. The model features a 1.3T turbocharged engine with a maximum power of 120 kW and a maximum torque of 230 Nm, paired with a 6-speed automatic transmission. The Chevrolet Orlando is a compact car with a 5-door, 5-seat hatchback structure. Its dimensions are 4684mm in length, 1807mm in width, and 1628mm in height, with a wheelbase of 2796mm. The suspension system consists of a MacPherson strut front suspension and a multi-link rear suspension.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.