Is the AC button in the car for cold air or hot air?

2 Answers
StJuliet
07/28/25 9:05pm
AC button is the cooling switch of the car air conditioning. When the AC button is pressed, the car air conditioning will cool, so AC is for cold air. The relevant introduction of car air conditioning cooling is as follows: 1. Introduction to the use of AC: After pressing the AC button, the compressor clutch will engage, and the engine will drive the compressor to run, so that the compressor can continuously compress the refrigerant and deliver it to the evaporator. The AC button is the switch for the cold air conditioning. When pressed, the compressor works while the cold/hot knob is adjusted to the cold zone, and the blower (1, 2, 3, 4) is turned on, at which time cold air is blown out. Hot air conditioning does not require pressing the AC button. 2. Introduction to the AUTO function: The AUTO gear is a unique function of the car's automatic air conditioning, which automatically selects cold or hot air based on the set interior temperature. However, the AC button does not need to be activated when cooling is not required, with the purpose of saving fuel by not letting the compressor work when cooling is not needed.
Was this review help?
13
0
Share
DelNevaeh
08/12/25 1:46am
As someone who frequently commutes by car, I believe the AC button is essentially the switch for the air conditioning compressor, primarily functioning to blow cold air and remove humidity from the cabin. When you turn it on during hot summer days, the cabin immediately becomes cool and comfortable. Hot air, however, doesn’t come from the AC—that’s when you rotate the temperature knob to the red zone or maximum in winter, and the system utilizes heat from the engine to blow warm air. The operation is intuitive: press the AC button to activate the compressor, and the air turns cold; adjust the temperature higher, and the air becomes warm. Some automatic climate control models even feature an AUTO mode that intelligently adjusts airflow and temperature, keeping the cabin consistently pleasant. Beginners often mistakenly think the AC can produce hot air, but in reality, it only cools and dehumidifies—the heating function is a separate component. I always set these buttons properly while driving, especially during long trips, to save fuel and ensure safety, avoiding driver fatigue.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What does dual lifting points mean for a crane?

Crane dual lifting points refer to two lifting points attached to the crane's main hook, using four wire rope slings to ensure lifting safety. Here is the relevant content introduction: Crane: Commonly used wire ropes for cranes include phosphating coated wire ropes, galvanized wire ropes, and stainless steel wire ropes. For use in atmospheric environments, the patented manganese-based phosphating coated wire rope has the longest service life. Current fatigue test data shows that the fatigue life of phosphating coated wire ropes is approximately 3-4 times that of smooth wire ropes of the same structure (under comparable laboratory conditions). The reasons for the significantly extended service life of wire ropes are their resistance to wear and corrosion, far surpassing imported wire ropes. For highly corrosive environments, hot-dip galvanized and phosphating dual-coated wire ropes are the preferred choice.
15
1
Share

What is the maximum length of vehicle a Class C license can drive?

C Class license can drive vehicles up to 6 meters in length. The highest vehicle category permitted for a Class C license is small-sized vehicles, which are defined as: vehicles with a total mass not exceeding 4.5 tons, seating capacity (including driver) not exceeding 9 persons, or vehicle length under 6 meters. According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses', the driving scope for a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with seating capacity less than or equal to 9 persons. Below is the classification of Class C licenses: 1. C1 license: Permitted vehicles: small and mini passenger vehicles, light and mini cargo vehicles; light and mini special purpose vehicles. 2. C2 license: Permitted vehicles: small and mini automatic transmission passenger vehicles, and light and mini automatic transmission cargo vehicles. 3. C3 license: Permitted vehicles: three-wheeled vehicles.
15
0
Share

What does it mean when the SCR light in a car is on?

When the SCR light in a car is on, it indicates a malfunction in the Selective Catalytic Reduction system, which requires timely inspection and repair. Below is an extended introduction: 1. Introduction to SCR: SCR stands for Selective Catalytic Reduction system. Its function is similar to the three-way catalyst in gasoline vehicles. It uses a catalyst in the traditional muffler, along with a urea supply system and injection control system, primarily to treat NOx in diesel engines. Simply put, it processes exhaust gases. 2. Causes of the malfunction: The main causes of such malfunctions include sensor damage, loose or short-circuited sensor connectors, and related wiring harness faults. It is necessary to seek professional inspection and repair.
10
0
Share

Where is the memory card for the Mercedes-Benz dash cam located?

Mercedes-Benz dash cam memory cards are typically located on the upper left side of the device body. The exact position may vary depending on the product model and specifications. Functions of dash cams: A dash cam is an instrument that records images, sounds, and related information during vehicle operation. After installation, it can document the entire driving process through video and audio, providing evidence for traffic accidents. For those who enjoy self-driving tours, it can also be used to record the process of overcoming challenging terrains. Components of dash cams: Different dash cam products have varying appearances, but their basic components typically include a main unit, vehicle speed sensor, and speed analysis software. The main unit consists of a microprocessor, data storage, real-time clock, display, lens module, operation keys, printer, and data communication interface. If the main unit does not include a display or printer, it should have corresponding data display and print output interfaces.
17
4
Share

What to Do If the Buick Excelle's Air Conditioning Cooling Is Not Ideal?

Under normal circumstances, if the air conditioning is not cooling properly, you can check whether the coolant is insufficient and add more if needed. The most common issue is a lack of refrigerant (Freon). When starting the system, first feel the return pipe to judge the temperature—if it's cold, check if the internal fan speed is too low, or clean or replace the internal pipe fins and dust filters. Below is relevant information: 1. Solution: Observe through the sight glass on the dryer tank. During normal operation, if there are continuous slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble turbulence is observed, it means the refrigerant is severely insufficient. If the refrigerant is insufficient or too low, the solution is to add refrigerant. However, note that if adding from the low-pressure side, do not invert the refrigerant bottle; if adding from the high-pressure side, do not start the engine. 2. Solution for excessive refrigerant: Observe through the sight glass on the dryer tank. If no bubbles are visible during operation and none appear after the compressor stops, the refrigerant is definitely excessive. If the pressurized cooling oil is overfilled, you may see cloudy bubbles in the sight glass during normal operation. If excessive refrigerant is confirmed, you can slowly release some from the low-pressure side maintenance port of the air conditioning system.
4
5
Share

Why Does Study and Reduction of Points Deduct Driver's License Points?

Study and reduction of points is implemented for drivers who have committed traffic violations and consequently had points deducted from their licenses. Below are the specific details: 1. Content: Study and reduction of points is a measure aimed at licensed drivers who have accumulated demerit points due to traffic violations. Upon completing online traffic safety education courses and passing the corresponding exams, these drivers may have their points reduced. This initiative is uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security as part of traffic management convenience measures. 2. Application Conditions: When a motor vehicle driver applies to receive traffic safety education for the purpose of reducing demerit points from traffic violations, the traffic management department of the public security authority should accept the application. Applications will be rejected if, within the current scoring cycle, the driver has two or more instances of full-point violations (accumulating 12 points), or if in the previous scoring cycle, the driver had two or more instances of full-point violations.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.