Is the 48V Mild Hybrid System Considered New Energy?

1 Answers
RyanRose
07/29/25 9:27pm
48V mild hybrid system is not classified as a new energy vehicle in mechanical terms, as it cannot independently provide electric power to enable pure electric driving. In daily use, the electric energy is only used to assist vehicle propulsion. Relevant details are as follows: The principle of the 48V hybrid system: Based on the original 12V electrical system of conventional vehicles, the voltage is increased to 48V, and with the addition of components such as motors and battery packs, it achieves the effect of assisting vehicle propulsion and storing/recovering electric energy. Advantages: Preventing battery depletion: Vehicles equipped with a 48V mild hybrid system come with a higher-capacity battery, making it possible to listen to music with the engine off and use more in-car electrical appliances without worry. The system will start the engine when the battery is about to run out, preventing battery depletion. Technology: The various high-tech power technologies accompanying 48V mild hybrid vehicles not only ensure the vehicle's power performance but also provide excellent fuel economy.
Was this review help?
6
1
Share
More Forum Discussions

What Causes a Car Battery to Suddenly Die in Winter?

Here are the reasons why a car battery may suddenly die: 1. The car has been parked for an extended period, causing the battery to discharge. Even when the car is idle, the battery naturally discharges due to its inherent properties. Additionally, alarm systems consume more power when triggered. High-end cars equipped with intelligent remote anti-theft systems using GPS technology connected to the battery are more prone to complete battery depletion. 2. The battery has reached the end of its lifespan. Most private cars use maintenance-free batteries. Clean the battery's inspection window and observe the color inside: green indicates normal battery status; black means low voltage and insufficient charge, which can be resolved by charging; white indicates the battery has reached the end of its life, and the only solution is to replace it. 3. Engine damage. A loose or broken alternator belt prevents the alternator from functioning. The alternator contains a rectifier, where instantaneous high current can burn out the diodes. Worn-out carbon brushes and slip rings can cause poor contact, and short-circuited or open stator coils can also render the alternator inoperative. Broken charging circuit wires or loose connections can result in the battery discharging without charging. 4. Insufficient battery electrolyte. During use, the electrolyte naturally evaporates. The electrolyte level should be between the maximum and minimum marks. Insufficient electrolyte naturally leads to inadequate battery charge. 5. Blown fuse causing battery discharge. A blown alternator fuse prevents the battery from charging, indicated by the alternator warning light. The solution is to locate and replace the blown fuse with one of the appropriate current rating. 6. Corroded battery terminals. Poor contact due to corrosion can cause the battery to die. Remove the white crystalline deposits and apply conductive paste to the terminals to enhance conductivity and protect them.
18
3
Share

What are the reasons for the decrease in coolant level?

There are several reasons for the decrease in engine coolant level in a car: 1. Poorly designed cooling system; 2. Rapid consumption due to poor circulation; 3. Leakage, with visible traces of seepage; 4. Coolant entering the cylinder and being burned or entering the oil pan. Below is additional information about coolant: 1. The cooling system is an important device that helps dissipate heat from the car engine. However, due to the use of antifreeze, it is particularly important to strengthen the inspection and maintenance of the cooling system after driving for a certain period of time. 2. Have a professional mechanic conduct an inspection. When adding coolant, ensure the engine has cooled down before doing so. During the process, start the engine and appropriately press the accelerator to expel air from the system. Add the coolant slowly, and if necessary, follow the instructions in the manual to vent the cooling system.
7
2
Share

What is the difference between hybrid and fuel-powered vehicles?

Hybrid vehicles differ from fuel-powered vehicles in the following aspects: one is fuel efficiency, and the second is quietness and environmental friendliness. Here is the relevant information: 1. One is fuel efficiency, which is the main advantage of hybrid vehicles over fuel-powered vehicles. Especially when used for urban commuting, due to traffic congestion or speed limits, the speed is generally controlled at around 50 mph. For hybrid vehicles, it is basically possible to rely entirely on the electric motor for driving, eliminating fuel consumption and significantly reducing operating costs. 2. The second is quietness and environmental friendliness. Hybrid vehicles start with the intervention of the electric motor, so there is no vibration sensation like in fuel-powered vehicles. Moreover, during driving, if only the electric motor is operating, the overall noise inside and outside the vehicle is minimal. In situations of urban traffic congestion, the absence of the engine's jerky sound is very helpful in reducing driving fatigue.
7
4
Share

Why is the high pressure of car air conditioning so high?

The reasons for the high pressure in car air conditioning are as follows: 1. Incomplete evacuation during maintenance, leading to air mixing into the system and increasing the condensation pressure; 2. Use of inferior refrigerant, the condenser electronic fan cannot open normally or the wind speed is insufficient; 3. The condenser is blocked by foreign objects and cannot dissipate heat normally, or the expansion valve is slightly blocked. If both high and low pressure values are measured to be too high, the reasons are as follows: 1. There is air in the system, and the system should be completely evacuated and refilled with refrigerant. 2. The system is blocked, mostly due to expansion valve blockage or failure, and the solution is to replace the expansion valve. 3. Excessive refrigerant, the system should be completely evacuated and refilled with a quantitative amount of refrigerant. 4. The condenser does not cool properly, and the solution is to clean the dirt from the condenser and radiator grille, and replace them if necessary.
7
2
Share

What items should a new car be equipped with?

After purchasing a new car, you can add items such as a dash cam, parking sensors, fire extinguisher, odor-absorbing charcoal bags, and child safety seats, which are all quite necessary and useful. You can also install seat covers, paint sealant, or mud flaps according to your needs. If it's a training vehicle, please attach a "Student Driver" label. The following are precautions for driving a new car: 1. Avoid using the same speed and gear for extended periods; instead, use different gears appropriately to allow each gear to undergo proper break-in. 2. Avoid sudden braking, as it can strain the engine and affect the braking system's performance. Also, refrain from long-distance driving. 3. If time permits, warm up the engine before starting to ensure full lubrication. Wait until the engine idle sound stabilizes and the coolant temperature reaches normal levels before driving. 4. It's best not to overload the car initially; keep the load below 80% of the maximum capacity to reduce the engine's burden.
13
1
Share

Is it still necessary to display the vehicle environmental protection label?

The vehicle environmental protection label is not mandatory. The reasons are as follows: 1. According to relevant laws and regulations, traffic police currently only penalize vehicles that fail to correctly display the annual inspection label and insurance label, both of which must be affixed to the upper right corner of the vehicle as required. There are no laws or regulations stipulating that the environmental protection label must be displayed, and traffic police will not penalize vehicles without it. 2. The vehicle environmental protection label is a classification label issued by the state for vehicle emission standards, divided into yellow and green categories. It is issued after reviewing the vehicle type and emission standards, aiming to facilitate energy-saving and emission-reduction inspections and periodic environmental checks for vehicles. Functions of the environmental protection label: 1. Serves as proof of compliance with vehicle emission standards. 2. Acts as a basis for determining the periodic environmental inspection cycle for vehicles. 3. Under high-emission vehicle traffic control measures, it serves as a pass for vehicles to travel in restricted areas.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.